Jump to content

Recommended Posts

Hi people,

How can i associate my nano with third radio (ralink) to my nexus 5 hotspot.

No problem with usb cable but i don't know how to link my nano to my phone through wifi.

 

Thanks.

 

Share this post


Link to post
Share on other sites

Hi @Dedsec_Nethunter

1)Providing the drivers are installed . Go to "Networking" then look for "Wifi Client Mode" Select the Interface ( the third radio should be wlan2 or wlan 3) then click "scan". 

At that point connect to the wifi hotspot you want to use ( enter the password) and hit "connect". 


You will know if you are connected as you will then see an ip address in Wifi Client mode. 

 

2) Once connected, then look above that tab and you'll see Route. You just need to define the default route for that Wifi ..Put in the gateway ip select the adaper ( wlan2 or wlan3) then hit update route . You should then see the default route table update with the newly added ip of your gateway and voila :)

Regards

 

 

  • Upvote 1

Share this post


Link to post
Share on other sites

Its been fun catching up with all the threads. It has been helpful. I'm new to the Nano and looking forward to future products the team will develop. Cheers :P

Share this post


Link to post
Share on other sites

Silly question: I just received a Nano tactical as a gift. It did not include the pineapple patch. Is there a way to order one?

Share this post


Link to post
Share on other sites

I have the Tactical Nano Elite and I've configured my wifi pineapple AP management SSID for wireless management. I've noticed once it boots up using the anker or direct with the Y dongle cable... it keeps the configurations provided. But once you power on the WP (wife pineapple),  it doesn't allow me to connect via wifi for management. What I had to do is... I have to connect the device via usb tether with my tablet and re-apply the network settings for AP management. Once I've updated the Network settings, only then I am able to connect to the device wireless to manage my WP device with either a laptop, phone or tablet. Why is that? Why do I have to constantly tether my device and re-apply the AP Management settings when the device is powered on? I thought it should be automated. Is there something I'm missing? 

Share this post


Link to post
Share on other sites
On 26/06/2017 at 3:55 PM, m0nk666 said:

Hi @Dedsec_Nethunter

1)Providing the drivers are installed . Go to "Networking" then look for "Wifi Client Mode" Select the Interface ( the third radio should be wlan2 or wlan 3) then click "scan". 

At that point connect to the wifi hotspot you want to use ( enter the password) and hit "connect". 


You will know if you are connected as you will then see an ip address in Wifi Client mode. 

 

2) Once connected, then look above that tab and you'll see Route. You just need to define the default route for that Wifi ..Put in the gateway ip select the adaper ( wlan2 or wlan3) then hit update route . You should then see the default route table update with the newly added ip of your gateway and voila :)

Regards

 

 

Hi @m0nk666,

 

Sorry for late answer.

Thanks you very much bro,it works!!

I hope i can help you in my turn one day if you need help ;)

 

Regards.

Share this post


Link to post
Share on other sites

going to get a nano, any rumors of a new version coming or perhaps a new firmware soon?

just wanting to see if i should wait or buy now?

Share this post


Link to post
Share on other sites
On 7/26/2017 at 8:02 PM, anark1 said:

going to get a nano, any rumors of a new version coming or perhaps a new firmware soon?

just wanting to see if i should wait or buy now?

there is no time like the present to get your feet wet. In the event something better comes out after you get a nano, you will be already more prepared for it based on your experience with the nano

Share this post


Link to post
Share on other sites

From what hak5 has said, even if a newer device is going to come out in 6 months, they wont tell you that because of the release.  As of now the nano and tetra are the best on the block and they are awesome.  New firmware will come out and thats just a simple update.

Share this post


Link to post
Share on other sites

When reading the last post - any idea if some update is planned for nano / tetra? - its been a while since the last release (almost a year)... It would be shame to let these devices die due to lack of support.... :(

Share this post


Link to post
Share on other sites
1 hour ago, maara said:

When reading the last post - any idea if some update is planned for nano / tetra? - its been a while since the last release (almost a year)... It would be shame to let these devices die due to lack of support.... :(

@Sebkinne has said they are currently working on a new firmware update but no ETA on when it will be released.

Share this post


Link to post
Share on other sites

Hey all...I purchased my Nano about a month ago...I have a question about the Anker power supply that came with it...it has a button on it but that seems to only be to display status when it is not connected to anything?  I am wondering is there a way to turn it off while it is connected to save juice in some situations or is the only way to just unplug it?  Thanks!  Looking forward to getting further into this.

Share this post


Link to post
Share on other sites
1 hour ago, WaterRide said:

Q: I received my Nano today but what's the right program to install the .bin file?

Best to use the nano itself. Get the nano online using client mode in networking page for example. Confirm your online by hitting the bulletins button on the dashboard. Then go to Advanced tab and hit the "check for upgrades" button and it should do the rest for you - it will reboot and wipe stuff so be sure to back up anything you want to keep.

Its also good to check out the wiki for this and other details.

  • Like 1

Share this post


Link to post
Share on other sites

Hello. I just purchaced a new NANO and I am absolutely happy with it. My problem is that I cannot connect to the configuration UI(http://172.16.42.1:1471/) when the router is not connected to a computer using the Y cable... is this always this way? Is there a way to connect to the UI via WIFI. I am thinking about carrying it around, go to my favorite Starbucks and have it connected to the public wifi so I can use it as an access point with my VPN for my phone. I do not want to also carry my windows computer around to connect the router with the Y cable each time I need to hook to a new wifi. What am I doing wrong?

Share this post


Link to post
Share on other sites

Another silly question: I have a VPS with Openvpn running. I can make my NANO direct all the traffic through my VPN by SSH'ing into the NANO and running openvpn client.ovpn, and then updating the IP tables with three commands. I have to do this manually and -even worse!- I have to leave the SSH sessions open to keep the router working properly with the VPN I need to take my router elsewhere, and I only have my Nexus 5 to go with it. I need a way to run the openvpn client.ovpn and three IPTABLES commands and leave them 'alive' in the router without having to keep it connected to my PC (there will be no 'my PC' in the outside world) . How do I accomplish this?

Share this post


Link to post
Share on other sites
11 minutes ago, Alexander_9 said:

Another silly question: I have a VPS with Openvpn running. I can make my NANO direct all the traffic through my VPN by SSH'ing into the NANO and running openvpn client.ovpn, and then updating the IP tables with three commands. I have to do this manually and -even worse!- I have to leave the SSH sessions open to keep the router working properly with the VPN I need to take my router elsewhere, and I only have my Nexus 5 to go with it. I need a way to run the openvpn client.ovpn and three IPTABLES commands and leave them 'alive' in the router without having to keep it connected to my PC (there will be no 'my PC' in the outside world) . How do I accomplish this?

Maybe script the openVPN commands, and look into using screen to drop and resume closed/dropped ssh sessions.

Share this post


Link to post
Share on other sites
2 hours ago, Alexander_9 said:

Is there a way to connect to the UI via WIFI

Yes, when you did the initial configuration you set up a management wifi network with password. Connect to this network and browse to http://172.16.42.1:1471 as uaual.

Share this post


Link to post
Share on other sites
7 minutes ago, Just_a_User said:

Maybe script the openVPN commands, and look into using screen to drop and resume closed/dropped ssh sessions.

Thank you, JAU! How do I use the screen to resume the closed/dropped ssh sessions from my Nexus 5?

Share this post


Link to post
Share on other sites
2 minutes ago, Alexander_9 said:

Thank you, JAU! How do I use the screen to resume the closed/dropped ssh sessions from my Nexus 5?

Screen is run on the pineapple. On your Nexus 5 you just need an android ssh terminal app.

I googled a guide for you https://research.computing.yale.edu/support/hpc/user-guide/preserve-session-screen  There are probably better ones if you look for yourself.

Share this post


Link to post
Share on other sites

Another question: I keep trying to change the timezone to mine: pacific; I apply, save, reboot, and the NANO keeps changing the time zone to Europe. How can I fix this?

Share this post


Link to post
Share on other sites
1 hour ago, Alexander_9 said:

Another question: I keep trying to change the timezone to mine: pacific; I apply, save, reboot, and the NANO keeps changing the time zone to Europe. How can I fix this?

Check again on a terminal using

date

Hitting refresh on the Configuration page, after setting timezones selection returns to the default UTC+0000, though it has changed on the Pineapple.

Share this post


Link to post
Share on other sites

I am having huge trouble managing the first time I plug the Wifi Pineapple Nano into my Mac. What do I do? What do I plug in? What software?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...