jamesford Posted August 7, 2016 Share Posted August 7, 2016 Yeah, this is testing with http only. I think there seems to be an issue with committing the iptables rules, I took a dump of the rules before launching RandomRoll and then after and could not locate any deltas. So it seems like the command to run iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination $(uci get network.lan.ipaddr):80' Is not executing as it should. I decided to do some more digging to see if the symlinks were being created to see if there was a permissions problem but the symlinks for the assets selector and the rolls are created correctly. Have you ever seen this issue with iptables before? Link to comment Share on other sites More sharing options...
Foxtrot Posted August 8, 2016 Author Share Posted August 8, 2016 I've never had the problem with IPTables before. If you can, do a "iptables -nL" and post it here before and after starting RandomRoll. Thanks Link to comment Share on other sites More sharing options...
Brett666 Posted September 20, 2016 Share Posted September 20, 2016 I am trying to install RandomRoll on a Nano on the latest firmware, it doesn't seem to complete the install. I'm installing to a 32gb sandisk SD card. Any ideas? Link to comment Share on other sites More sharing options...
Foxtrot Posted September 20, 2016 Author Share Posted September 20, 2016 1 hour ago, Brett666 said: I am trying to install RandomRoll on a Nano on the latest firmware, it doesn't seem to complete the install. I'm installing to a 32gb sandisk SD card. Any ideas? Make sure you have the Module Manager up to date, and give it time. It's a large module. Link to comment Share on other sites More sharing options...
r3g3x Posted October 20, 2016 Share Posted October 20, 2016 RandomRoll works well for me and it is humorous to all but my family. :) It works like a champ on the Tetra. I plan on using this for a demo and would like to replace a Roll with one of my own. Based on what I see this should be pretty easy by just swapping out some file. Correct? Link to comment Share on other sites More sharing options...
Foxtrot Posted October 20, 2016 Author Share Posted October 20, 2016 3 hours ago, r3g3x said: RandomRoll works well for me and it is humorous to all but my family. :) It works like a champ on the Tetra. I plan on using this for a demo and would like to replace a Roll with one of my own. Based on what I see this should be pretty easy by just swapping out some file. Correct? You don't need to replace anything, just create a new folder with the same structure as the others. Link to comment Share on other sites More sharing options...
r3g3x Posted October 20, 2016 Share Posted October 20, 2016 Thanks Foxtrot - will implement tonight! Link to comment Share on other sites More sharing options...
Zer0Co0l Posted November 22, 2016 Share Posted November 22, 2016 On 8/6/2016 at 7:42 PM, Foxtrot said: Are they browsing HTTPS websites? RandomRoll can obviously only work on plain HTTP websites. FOXTROT, I am having an issue. First I thought it was the https issue described in this post. But after ensuring that I was browsing http sites I get error 403 forbidden. Any ideas? Also haw do I create my own?? Where do I find the files? Link to comment Share on other sites More sharing options...
Foxtrot Posted November 23, 2016 Author Share Posted November 23, 2016 On 22/11/2016 at 9:08 PM, Zer0Co0l said: FOXTROT, I am having an issue. First I thought it was the https issue described in this post. But after ensuring that I was browsing http sites I get error 403 forbidden. Any ideas? Also haw do I create my own?? Where do I find the files? After enabling the module post the output of "ls /www/". You can create your own module by mirroring any of the rolls that come with the module and changing their code, as described in this thread. Link to comment Share on other sites More sharing options...
FreqANDY Posted November 24, 2016 Share Posted November 24, 2016 Zerocool, Are you attempting to run evil portal or DNSspoof at the same time ? =) I've got that error when an interfering module was running in the background. Link to comment Share on other sites More sharing options...
MaterialClaw Posted December 2, 2016 Share Posted December 2, 2016 Having a bit of trouble getting random roll to work. I reset to factory defalts formated the sd card and installed random roll to the sd card without issues. I have no other modules installed, the landing page disabled and no other modules enabled except PineAP. I have all the options enabled in PineAP and have connected to one of the created acess points using my note 4 for testing. I then used chrome to go to http page not https I've done this with the pineappe connected to the inernet through the stub and without. I have never been redirected to the roll. I'm using the latest updated version of the pineaple software. Link to comment Share on other sites More sharing options...
Foxtrot Posted December 2, 2016 Author Share Posted December 2, 2016 18 minutes ago, MaterialClaw said: Having a bit of trouble getting random roll to work. I reset to factory defalts formated the sd card and installed random roll to the sd card without issues. I have no other modules installed, the landing page disabled and no other modules enabled except PineAP. I have all the options enabled in PineAP and have connected to one of the created acess points using my note 4 for testing. I then used chrome to go to http page not https I've done this with the pineappe connected to the inernet through the stub and without. I have never been redirected to the roll. I'm using the latest updated version of the pineaple software. Not quite sure what you mean by "the stub"? Try navigating to 172.16.42.1 when the module is running and see if you get a meme. Link to comment Share on other sites More sharing options...
MaterialClaw Posted December 2, 2016 Share Posted December 2, 2016 Sorry I ment the usb wifi adapter plugged into the pinapple. I'm going to try what you said I'll post again in a bit Link to comment Share on other sites More sharing options...
MaterialClaw Posted December 2, 2016 Share Posted December 2, 2016 Navigating to 172.16.42.1 did get me a roll. I then tried to navigate to a few other sites and either got the roll or a black screen with a small square broken icon. This is the first time it worked in a test. Did navigating to 172.16.42.1 fix something? Link to comment Share on other sites More sharing options...
Foxtrot Posted December 2, 2016 Author Share Posted December 2, 2016 9 minutes ago, MaterialClaw said: Navigating to 172.16.42.1 did get me a roll. I then tried to navigate to a few other sites and either got the roll or a black screen with a small square broken icon. This is the first time it worked in a test. Did navigating to 172.16.42.1 fix something? No, it didn't fix anything. What pages are you navigating to? Link to comment Share on other sites More sharing options...
MaterialClaw Posted December 2, 2016 Share Posted December 2, 2016 Popsci is where I got the error and webmd the roll Link to comment Share on other sites More sharing options...
Wiz Posted December 6, 2016 Share Posted December 6, 2016 I installed it got it working partially that is because no audio plays and I tried with two different clients iOS and Chrome on a droid any suggestions? Link to comment Share on other sites More sharing options...
Wiz Posted December 6, 2016 Share Posted December 6, 2016 13 hours ago, Wiz said: I installed it got it working partially that is because no audio plays and I tried with two different clients iOS and Chrome on a droid any suggestions? Behavior seems to be only on mobile devices, Laptops and Desktops work fine. I am trying to figure out what is wrong, anyone has a clue on what to look for? Link to comment Share on other sites More sharing options...
Foxtrot Posted December 6, 2016 Author Share Posted December 6, 2016 3 hours ago, Wiz said: Behavior seems to be only on mobile devices, Laptops and Desktops work fine. I am trying to figure out what is wrong, anyone has a clue on what to look for? Be more specific about the devices. Link to comment Share on other sites More sharing options...
Wiz Posted December 6, 2016 Share Posted December 6, 2016 23 hours ago, Foxtrot said: Be more specific about the devices. So I tried it on an iPhone, iPad and a android phone and the roll page displays just fine but no sound on either however if I use a windows laptop with any browser the sound comes on. I have also confirmed that loading a video will play sound just fine however autoplay is not possible either. <video autoplay controls> </video> In fact if you do not set the controls attribute the video won't even show. This may be just coding issues but I am trying to rule out the module. Link to comment Share on other sites More sharing options...
MaterialClaw Posted December 7, 2016 Share Posted December 7, 2016 I have a Note 4 Model # SM-N910V and the rolls have no audio when displayed. Link to comment Share on other sites More sharing options...
Foxtrot Posted December 8, 2016 Author Share Posted December 8, 2016 https://bugs.chromium.org/p/chromium/issues/detail?id=138132 Link to comment Share on other sites More sharing options...
Wiz Posted December 8, 2016 Share Posted December 8, 2016 1 hour ago, Foxtrot said: https://bugs.chromium.org/p/chromium/issues/detail?id=138132 Well that answers the issue that's for sure, however in a mobile first world then the module does not serve it's purpose and becomes a duplicate of the Evil Portal. At least that's my opinion. Link to comment Share on other sites More sharing options...
Foxtrot Posted December 8, 2016 Author Share Posted December 8, 2016 Well, RandomRoll is about 2 years older than EvilPortal, but whatever. I can't do anything about vendors from stopping audio files loading. The best thing I can do is make it play on a click event, and let it still auto-play on desktops. If you can figure out a way to exploit chrome and beat google's efforts to stop things like this module working, you let me know. (same for apple) Link to comment Share on other sites More sharing options...
Wiz Posted December 9, 2016 Share Posted December 9, 2016 3 hours ago, Foxtrot said: Well, RandomRoll is about 2 years older than EvilPortal, but whatever. I can't do anything about vendors from stopping audio files loading. The best thing I can do is make it play on a click event, and let it still auto-play on desktops. If you can figure out a way to exploit chrome and beat google's efforts to stop things like this module working, you let me know. (same for apple) Sorry if I came across like if I was bashing your work because I was not. I just wanted to point out that the majority of the people now days browse on mobile devices so modules like yours should evolve. I fully understand that we have no control over the limitations built in the mobile browsers by the manufactures however I am sure that if there is a will there is a way. Maybe the click event would be just fine or you convert the module to something better that Evil Portal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.