Jump to content

Yardstick one config issues


oconnor
 Share

Recommended Posts

what is causing these errors?

root@kali:~/rfcat_150225# sudo rfcat -r
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
Error in resetup():USBError(110, 'Operation timed out')
^CTraceback (most recent call last):
File "/usr/local/bin/rfcat", line 56, in <module>
interactive(ifo.index, DongleClass=RfCat, intro=intro)
File "/usr/local/lib/python2.7/dist-packages/rflib/__init__.py", line 190, in interactive
d = DongleClass(idx=idx)
File "/usr/local/lib/python2.7/dist-packages/rflib/chipcon_nic.py", line 295, in __init__
USBDongle.__init__(self, idx, debug, copyDongle, RfMode)
File "/usr/local/lib/python2.7/dist-packages/rflib/chipcon_usb.py", line 176, in __init__
self.resetup(copyDongle=copyDongle)
File "/usr/local/lib/python2.7/dist-packages/rflib/chipcon_usb.py", line 291, in resetup
self.setup(console, copyDongle)
File "/usr/local/lib/python2.7/dist-packages/rflib/chipcon_usb.py", line 229, in setup
iSN = do.getDescriptor(1,0,50)[16]
File "/usr/lib/python2.7/dist-packages/usb/legacy.py", line 289, in getDescriptor
return control.get_descriptor(self.dev, length, desc_type, desc_index)
File "/usr/lib/python2.7/dist-packages/usb/control.py", line 169, in get_descriptor
data_or_wLength = desc_size
File "/usr/lib/python2.7/dist-packages/usb/core.py", line 702, in ctrl_transfer
self.__get_timeout(timeout)
File "/usr/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 596, in ctrl_transfer
timeout))
KeyboardInterrupt

Link to comment
Share on other sites

  • 3 weeks later...

Hello! Pardon the super-noobness, but I also have a bit of an install issue with Yardstick. Kindly request anyone's assistance. Bottom line, I can't get YS1 to be recognized by Linux. I've followed the instructions in the rfcat Readme file and what Shannon/Darren both said on Hak5 episode 1908 (I believe I followed the directions correctly).

I am running Kali GNU/Linux 2.0 (sana) 64-bit, via Virtual machine, which I think may be a contributing factor.

My virtual Machine is powered by Oracle VirtualBox 5.0.10.

My machine is a newer Dell laptop running 64-bit Windows 10.

I apt-got the dependencies mentioned in the Episode and the RFCAT readme.

I did conduct any bootloading to the YS1 hardware, because my understanding from listening to Darren is that isn't needed.

When I plug-in the YS1 into the USB port while running Kali, Windows (running in the background behind VirtualBox) gives me an alert saying it doesn't recognize the USB device.

I also can't get Kali linx to recognize the RTL SDR that I bought from the Hak Shop as well (even though windows picks it up just fine when I use SDR sharp).

Any ideas for this new guy? Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...