Loque Posted December 8, 2015 Share Posted December 8, 2015 hello, i flashed URB with twin duck firmware (c_duck_v2_S001.hex) and i have problem executing any other payload except original, hello world! so i generate bin file and placed it on root folder of sd card, when i put URB in computer LED flashes few times RED and nothing happend, like it can't read sd card or bin file (bin file is downloaded from http://ducktoolkit-411.rhcloud.com) only original hello world payload is working correctly so any ideas ? thnx Quote Link to comment Share on other sites More sharing options...
The Coder Posted December 9, 2015 Share Posted December 9, 2015 (edited) I had a similiar issue like this on my first ducky , I ended up having to flash the twin duck firmware 2-3 times before it would work. Also , I had to set a delay prior to the payload Edited December 9, 2015 by The Coder Quote Link to comment Share on other sites More sharing options...
Loque Posted December 10, 2015 Author Share Posted December 10, 2015 you flash 2-3 times with twin duck firmware or you alternate between twin duck and some other firmware ? what kind of dely we are talking about in payload, DELAY number must be larger or ? thank you Quote Link to comment Share on other sites More sharing options...
The Coder Posted December 10, 2015 Share Posted December 10, 2015 Yes, I had to flash it multiple times, for some reason on my windows 10 machine it was giving me issue with flashing new FW. I set a DELAY around 2000 - 5000 ms . Quote Link to comment Share on other sites More sharing options...
Loque Posted December 10, 2015 Author Share Posted December 10, 2015 Ok! now i am flashing it for some time and nothing but i'll set DELAY on 2500 thnx Quote Link to comment Share on other sites More sharing options...
The Coder Posted December 10, 2015 Share Posted December 10, 2015 Feel free to message me if you have any other questions , also does the GPIO pin execute the paylaod ? Quote Link to comment Share on other sites More sharing options...
Loque Posted December 10, 2015 Author Share Posted December 10, 2015 Thank you! Well i notice that i need special payload's for twin duck firmware but i can't figure out what is the difference between regular payloads and payloads for twin duck firmware no it doesn't execute payload when i press GPIO pin even i flashed with twin duck firmware (S002) Quote Link to comment Share on other sites More sharing options...
barry99705 Posted December 14, 2015 Share Posted December 14, 2015 Pretty sure mine is running twin duck. You have to hit caps lock 4 times in a row to get it to tire off the payload. It doesn't have to be twin duck specific payloads either. Quote Link to comment Share on other sites More sharing options...
Loque Posted December 15, 2015 Author Share Posted December 15, 2015 @barry99705 i tried that too but it did not work but i can try again :) thnx Quote Link to comment Share on other sites More sharing options...
Sparctor Posted December 18, 2015 Share Posted December 18, 2015 Make sure to name the compiled script "inject.bin" I was going crazy trying to get my first payload to work until I realized the name is essential. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.