Narf Posted October 31, 2015 Posted October 31, 2015 Hopefully you can help me! this is the problem why he can not find a device? pleas look at the photo SIOCSIFADDR: No matching device found eth0: Error obtaining interface flags: No matching device found SIOCSIFNETMASK: No matching device found eth0: Error obtaining interface flags: No matching device found SIOCADDRT: No matching device found Quote
Mr-Protocol Posted October 31, 2015 Posted October 31, 2015 Run the script with root permissions and disable network manager to avoid conflicts. Quote
Narf Posted November 1, 2015 Author Posted November 1, 2015 Sorry, has both not helped! Any other ideas? Quote
Foxtrot Posted November 1, 2015 Posted November 1, 2015 is eth0 up? does eth0 exist? The script is telling you that eth0 doesn't exist. Quote
Narf Posted November 2, 2015 Author Posted November 2, 2015 thx, I solved the problem with the eth0 the ethernet has existed twice eth0 and eth1 ^^ SIOCADDRT: No matching device found <--- is now the problem I've been looking for it, but have not found a solution on the web! if I go directly through the browser to the ip he asks me even after user name and password, but he did not accept and it is definitely the right ;) _ ___ _______ ____ _ __ | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ OWN the Network /_/ /_/ v2.1 Pineapple Netmask [255.255.255.0]: Pineapple Network [172.16.42.0/24]: Interface between PC and Pineapple [eth0]: Interface between PC and Internet [wlan0]: Internet Gateway [192.168.2.1]: IP Address of Host PC [172.16.42.42]: IP Address of Pineapple [172.16.42.1]: _ . ___ \||/ Internet: 192.168.2.1 - wlan0 ( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42 (_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0 SIOCADDRT: Kein passendes Gerät gefunden Browse to http://172.16.42.1:1471 -- Happy Hacking! dowly@dowly:~$ ifconfig eth0 Link encap:Ethernet Hardware Adresse 1c:75:08:a5:3a:40 inet Adresse:172.16.42.100 Bcast:172.16.42.255 Maske:255.255.255.0 inet6-Adresse: fe80::1e75:8ff:fea5:3a40/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:110 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:157 Fehler:0 Verloren:0 Überläufe:0 Träger:7 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:10297 (10.2 KB) TX-Bytes:19374 (19.3 KB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:432 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:432 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:41580 (41.5 KB) TX-Bytes:41580 (41.5 KB) wlan1 Link encap:Ethernet Hardware Adresse 88:9f:fa:4d:80:66 inet Adresse:192.168.2.112 Bcast:192.168.2.255 Maske:255.255.255.0 inet6-Adresse: fe80::8a9f:faff:fe4d:8066/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:528 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:410 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:200783 (200.7 KB) TX-Bytes:83510 (83.5 KB) Quote
barry99705 Posted November 3, 2015 Posted November 3, 2015 thx, I solved the problem with the eth0 the ethernet has existed twice eth0 and eth1 ^^ SIOCADDRT: No matching device found <--- is now the problem I've been looking for it, but have not found a solution on the web! if I go directly through the browser to the ip he asks me even after user name and password, but he did not accept and it is definitely the right ;) _ ___ _______ ____ _ __ | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ OWN the Network /_/ /_/ v2.1 Pineapple Netmask [255.255.255.0]: Pineapple Network [172.16.42.0/24]: Interface between PC and Pineapple [eth0]: Interface between PC and Internet [wlan0]: Internet Gateway [192.168.2.1]: IP Address of Host PC [172.16.42.42]: IP Address of Pineapple [172.16.42.1]: _ . ___ \||/ Internet: 192.168.2.1 - wlan0 ( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42 (_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0 SIOCADDRT: Kein passendes Gerät gefunden Browse to http://172.16.42.1:1471 -- Happy Hacking! dowly@dowly:~$ ifconfig eth0 Link encap:Ethernet Hardware Adresse 1c:75:08:a5:3a:40 inet Adresse:172.16.42.100 Bcast:172.16.42.255 Maske:255.255.255.0 inet6-Adresse: fe80::1e75:8ff:fea5:3a40/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:110 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:157 Fehler:0 Verloren:0 Überläufe:0 Träger:7 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:10297 (10.2 KB) TX-Bytes:19374 (19.3 KB) lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:65536 Metrik:1 RX-Pakete:432 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:432 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX-Bytes:41580 (41.5 KB) TX-Bytes:41580 (41.5 KB) wlan1 Link encap:Ethernet Hardware Adresse 88:9f:fa:4d:80:66 inet Adresse:192.168.2.112 Bcast:192.168.2.255 Maske:255.255.255.0 inet6-Adresse: fe80::8a9f:faff:fe4d:8066/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX-Pakete:528 Fehler:0 Verloren:0 Überläufe:0 Fenster:0 TX-Pakete:410 Fehler:0 Verloren:0 Überläufe:0 Träger:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX-Bytes:200783 (200.7 KB) TX-Bytes:83510 (83.5 KB) Here's your problem. From the command line run, /etc/init.d/network-manager stop Then run, ifconfig eth0 172.16.42.42/24 Now run your wp5.sh script, then try connecting. Quote
Sebkinne Posted November 3, 2015 Posted November 3, 2015 Because you don't have wlan0 but wlan1, please make sure you specify eth0 and wlan1 instead of eth0 and wlan0. Best Regards, Sebkinne Quote
Narf Posted November 3, 2015 Author Posted November 3, 2015 | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ OWN the Network /_/ /_/ v2.1 Pineapple Netmask [255.255.255.0]: Pineapple Network [172.16.42.0/24]: Interface between PC and Pineapple [eth0]: Interface between PC and Internet [wlan0]: Internet Gateway [192.168.2.1]: IP Address of Host PC [172.16.42.42]: IP Address of Pineapple [172.16.42.1]: _ . ___ \||/ Internet: 192.168.2.1 - wlan0 ( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42 (_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0 Browse to http://172.16.42.1:1471 -- Happy Hacking! thx ist works! but the same problem here ---> if I go directly through the browser to the ip he asks me even after user name and password, but he did not accept and it is definitely the right it may be possible to change the password without logging in. although I'm sure that's the right Quote
Sebkinne Posted November 3, 2015 Posted November 3, 2015 | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ OWN the Network /_/ /_/ v2.1 Pineapple Netmask [255.255.255.0]: Pineapple Network [172.16.42.0/24]: Interface between PC and Pineapple [eth0]: Interface between PC and Internet [wlan0]: Internet Gateway [192.168.2.1]: IP Address of Host PC [172.16.42.42]: IP Address of Pineapple [172.16.42.1]: _ . ___ \||/ Internet: 192.168.2.1 - wlan0 ( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42 (_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0 Browse to http://172.16.42.1:1471 -- Happy Hacking! thx ist works! but the same problem here ---> if I go directly through the browser to the ip he asks me even after user name and password, but he did not accept and it is definitely the right it may be possible to change the password without logging in. although I'm sure that's the right You can reset the WiFi Pineapple MKV's password by performing either a factory reset or following the "Unbricking a bricked WiFi Pineapple MKV". Best Regards, Sebkinne Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.