edpr Posted July 15, 2015 Share Posted July 15, 2015 Rediscovered the good ol' MK4 in a box at the attic! Now I'd like to configure the wired connection as a bridge to eventually perform tcpdump on it. I'll also need to ssh into the box so I thought to use the wlan as AP. lan0 and lan1 bridged as bridge0wlan0 as `AP` with dhcp - completely seperated from lan0 and lan1 I've tried the config below but it doesn't work leaving the whole system unreachable. Any ideas and pointers? Thanks in advanceEDPR /etc/config/wireless config wifi-device radio0 option type mac80211 option channel 11 option hwmode 11ng option macaddr 00:c0:ca:6f:05:96 option htmode HT20 list ht_capab SHORT-GI-20 list ht_capab SHORT-GI-40 list ht_capab RX-STBC1 list ht_capab DSSS_CCK-40 # REMOVE THIS LINE TO ENABLE WIFI: # option disabled 1 config wifi-iface option device radio0 option network lan option mode ap option ssid TEST option encryption psk2 option key P@$$W0RD /etc/config/network config interface loopback option ifname lo option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 config interface bridge0 option ifname eth0 eth1 option type bridge option proto static option ipaddr 0.0.0.0 option netmask 0.0.0.0 config interface lan option ifname wlan0 option type bridge option proto static option ipaddr 172.16.42.1 option netmask 255.255.255.0 option gateway 172.16.42.42 option dns 8.8.8.8 #config switch_vlan # option device eth0 # option vlan 1 # option ports "0 1" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.