Fallen Archangel Posted May 4, 2015 Share Posted May 4, 2015 I've been trying to get the Wifi Pineapple to be able to perform the pixie dust attack for quite a while, and I can't seem to be able to. I'm thinking the problem is with the modified Reaver you have to install, but I can't be sure.I've followed this guide: http://matthewhknight.com/autopixiewps/(In case the link above is remove or something, just google AutoPixieWPS) On my PC and Laptop it works flawlessly, but whenever I try this on the pineapple, I'm no longer able to pick up WPS. If anyone has gotten this to work, or has any ideas, please let me know. Thanks. Quote Link to comment Share on other sites More sharing options...
WPA3 Posted May 4, 2015 Share Posted May 4, 2015 (edited) I've been trying to get the Wifi Pineapple to be able to perform the pixie dust attack for quite a while, and I can't seem to be able to. I'm thinking the problem is with the modified Reaver you have to install, but I can't be sure. I've followed this guide: http://matthewhknight.com/autopixiewps/ (In case the link above is remove or something, just google AutoPixieWPS) On my PC and Laptop it works flawlessly, but whenever I try this on the pineapple, I'm no longer able to pick up WPS. If anyone has gotten this to work, or has any ideas, please let me know. Thanks. I'm sure the user datahead is working on this if i remember correctly there was a post on HF about it. Edited May 4, 2015 by z3roc00l Quote Link to comment Share on other sites More sharing options...
Fallen Archangel Posted May 4, 2015 Author Share Posted May 4, 2015 Datahead made a post about it, but thay was talking about Kali, not the Pineapple. the only thing ive been able to find on the other forum was the one from autopixie and the wifite mod. Neother of them are about the pineapple, so I havent found much support. If anyone could help me take a look at this I would be greatful. Quote Link to comment Share on other sites More sharing options...
WPA3 Posted May 5, 2015 Share Posted May 5, 2015 Datahead made a post about it, but thay was talking about Kali, not the Pineapple. the only thing ive been able to find on the other forum was the one from autopixie and the wifite mod. Neother of them are about the pineapple, so I havent found much support. If anyone could help me take a look at this I would be greatful. He mentioned it in a PM, just found it now. I'm not sure if he started it yet but have asked him an linked thread hoping he will reply soon. Quote Link to comment Share on other sites More sharing options...
Fallen Archangel Posted May 5, 2015 Author Share Posted May 5, 2015 Thanks for passing the message. As soon as my classes are out, I'm going to see if I can figure out anything else. I believe there was a dependency or two missing from the pineapple that aren't on opkg, and I think I remember having problems with WASH. I'll post my findings as soon as I'm home. Just remember that I'm not an expert. Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 6, 2015 Share Posted May 6, 2015 I have my own reaver i use compiled for the pineapple, i will however try and bring mine and t6x's fork over to the pineapple for public use. the latest release of pixiewps should work natively on the pineapple, as i had to work with wiire to try and provide some code changes for us to port over for endianness of the pineapple. You can expect to see a release of reaver from me for the pineapple later this week, i apologize for the delay Quote Link to comment Share on other sites More sharing options...
cheeto Posted May 6, 2015 Share Posted May 6, 2015 Thanks Datahead!! Looking forward to it. I've used Pixie Dust before, It will be a huge plus for the mkv. Cheers Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 6, 2015 Share Posted May 6, 2015 I think i may first have to trim out some features for the release of my modded reaver for stability reasons, but all the needed output will be there and i will even probably provide a nice script to launch and collect the data for either offloading the collected data to pc, or just to do it all on the pineapple. Now, the plan of action will be to first release a minimal required feature set to the pineapple regarding reaver and pixiehash gathering. The next move in the step would be to test pixiewps crosscompiles and make optimizations where i can. It will be considerably slower on our pineapples but 'should' work. I worry about putting too much load on the pineapple when doing calculations for realtek. Then after i have those two built, stable and ready to go, the next step is to unify reaver and pixiewps much like me and t6x have been working on with our reaver fork. Quote Link to comment Share on other sites More sharing options...
Fallen Archangel Posted May 7, 2015 Author Share Posted May 7, 2015 I think it might be worth mentioning that aircrack has been updated with more support for pixiewps, and Kali is now using the Reaver fork by t6x. https://www.kali.org/penetration-testing/pixiewps-reaver-aircrack-ng-updates/ Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 7, 2015 Share Posted May 7, 2015 (edited) new versions of aircrack are easy to rebuild for the pineapple, as everything is already there for build with the pineapple / openwrt dev packages :) so im sure i could put those builds up aswel if seb hasnt already. also, to note that wash doesnt install itself properly if you are installing reaver to SD, if thats the issue you were having. symlinks have to be made in the proper locations. see my post here https://forums.hak5.org/index.php?/topic/31454-support-wps/page-17#entry255568 but the issue not being exactly with wash itself, but more so the needed directories not being built and with our new reaver builds, the locations of install have also changed Edited May 7, 2015 by DataHead Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 8, 2015 Share Posted May 8, 2015 Thought i'd update ya, i have compiled a version of reaver for displaying the hashes needed for pixiehashes, it will generally display more output that what we have done with our t6x fork, but its For more of a future compatability reason. Its working as expected but just need to add my -P option to it, and make some other small adjustments so we can run it without having to kb interrupt it to finish. Also ive compiled the latest aircrack-ng 1.2 rc 2 and have it working properly aswel Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 8, 2015 Share Posted May 8, 2015 so the todo list will be to finish up reaver to a minimal use for the pixie hashes, then get pixiewps goin Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 8, 2015 Share Posted May 8, 2015 (edited) And if all go's as i expect without my personal life getting in the way, will probably see the release of reaver tomorrow, and if anyone wants, i can put up the aircrack version aswel. But do note, that in these releases of aircrack, airmon-ng has been replaced with airmon-zc but is still known as airmon-ng. Which will create monitor interfaces as wlan1mon instead of mon1, which may interfere with some of the system functions and or infusions just purely looking for a monx interface instead of wlanxmon interfaces Edit: I've decided to just hold off on releasing the new aircrack, as im sure it will be released with the next fw update and it will eliminate any issue if i were to do a 'pre-release'. So just wait for the next Firmware update. Edited May 8, 2015 by DataHead Quote Link to comment Share on other sites More sharing options...
cheeto Posted May 8, 2015 Share Posted May 8, 2015 Thanks so much DATAHEAD! I really appreciate the time you're putting into this. Really looking forward to this infusion. I've had some success using this script in with WifiSlax. It's VERY automatic. The really doesn't need to do much at all. :) Cheers! Quote Link to comment Share on other sites More sharing options...
WPA3 Posted May 10, 2015 Share Posted May 10, 2015 And if all go's as i expect without my personal life getting in the way, will probably see the release of reaver tomorrow, and if anyone wants, i can put up the aircrack version aswel. But do note, that in these releases of aircrack, airmon-ng has been replaced with airmon-zc but is still known as airmon-ng. Which will create monitor interfaces as wlan1mon instead of mon1, which may interfere with some of the system functions and or infusions just purely looking for a monx interface instead of wlanxmon interfaces Edit: I've decided to just hold off on releasing the new aircrack, as im sure it will be released with the next fw update and it will eliminate any issue if i were to do a 'pre-release'. So just wait for the next Firmware update. Thanks for keeping us updated. Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 11, 2015 Share Posted May 11, 2015 (edited) Just wanted to keep everyone updated afain. I am still working on this but there has been an introduction of a compatability bug in reaver across numerous linux distro's, which has probably been there since its early versions, and just now surfacing after some other 'needed' lib updates / installs. this issue is being investigated. Edited May 11, 2015 by DataHead Quote Link to comment Share on other sites More sharing options...
cheeto Posted May 12, 2015 Share Posted May 12, 2015 Thanks for keeping up to speed Datahead. I'm sure it's going to be worth the wait. Thanks again. Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 (edited) can someone test the output of this for me? please use it in conjunction with the '-vv' switch and look for [P] lines should be: PKR PKE AuthKey EHash1 EHash2 E-NONCE R-NONCE if it outputs all those, then good :) also as for pixiewps, we have a multithreaded version in the works, so porting will wait until that release but for now, i need someone whom is willing to test this version of reaver, my pineapple is having some slight issues at the moment http://www39.zippyshare.com/v/nD38lOIZ/file.html extract the .ipk from the zip and place it on your sd card then, cd /sd opkg install reaver_r113-1_ar71xx.ipk this will overwrite any your previous reaver install, so please do so at your own risk. and if whomever tests this, can post a a copy of its output, would be greatly appreciated again, use it with -vv and -P switches ( -P is in place to prevent possible lockouts, and you will have to terminate reaver it manually in this mode ) http://www39.zippyshare.com/v/nD38lOIZ/file.html Edited May 16, 2015 by DataHead Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 update, for shits and giggles, i got the make file done for pixiewps, and compiled for the pineapple, and so far it is working. havent yet tested it against hashes, but will do soon :) Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 and pixiewps works for the pineapple, tested with some hashes and worked great. but if you are use to using it on a pc, the times to calculate the hashes have upped a bit. on my pc, takes miliseconds for the calulations. on the pineapple, been seeing anywhere from 2 - 15 seconds. still not bad, but it is to be expected from the 400mhz mips processor :D Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 And for those whom need to see proof of pixiewps on the pineapple, here is a screen shot. Left side is pineapples build, right side is kali http://gyazo.com/0f997a86a5346260818ec9948a93c9ef And the broken pipe after pixiewps on the pineapple is because i had disconnected from it while ssh was active, just incase anyone thinks it was an error from pixiewps Quote Link to comment Share on other sites More sharing options...
raz0r Posted May 16, 2015 Share Posted May 16, 2015 :( root@Pineapple:/sd# chmod 777 reaver_r113-1_ar71xx.ipkroot@Pineapple:/sd# opkg install reaver_r113-1_ar71xx.ipkInstalling reaver (r113-1) to root...Collected errors: * opkg_install_pkg: Package reaver md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'. * opkg_install_cmd: Cannot install package reaver. Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 You shouldnt have to chmod it? did you you put in it the root of the sd card? Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 Oh i see whats wrong. It is challanging it to the current list it has from an opkg update. If you were to restart the pineapple and the do not do opkg update, but just cd /sd opkg install the reaver ipk it should install Quote Link to comment Share on other sites More sharing options...
DataHead Posted May 16, 2015 Share Posted May 16, 2015 If that does not work, i will look at it later when im at my dev box. as i have a few of the test stage ipks ready to deploy to the pineapple anyways. next time ill be sure to mirror the uploads aswel, incase of a corrupt upload Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.