infosecwriter Posted December 29, 2014 Posted December 29, 2014 Out of the box, I connected to the Mark V and it asked for the initial password. Then it looped. Reset the box, same thing. So I followed the steps to reflash the mark V. reset the dip switches, after the flash and reboot. I can not access the device on 172.16.42.1. I reflashed it 6 times with the same result. No response on the normal IP address. Any suggestions? Quote
infosecwriter Posted December 29, 2014 Author Posted December 29, 2014 P.S. Green light is solid and blue is blinking after the flash and reboot. Left it sit for a couple days and still no response from the IP, so I believe I waited long enough for it to come back up. ;) Quote
infosecwriter Posted December 30, 2014 Author Posted December 30, 2014 Should I just send it back for a new one? Quote
Foxtrot Posted December 31, 2014 Posted December 31, 2014 try mailing the hakshop? shop@hak5.org iirc Quote
TheWoodser Posted December 31, 2014 Posted December 31, 2014 In the "Unbricking Instructions" (www.wifipineapple.com/?flashing) it says to connect via 192.168.1.1 Maybe try that IP address. Quote
infosecwriter Posted January 1, 2015 Author Posted January 1, 2015 (edited) I did. then made it all the way through until the reboot and dip switch reset as mentioned before. I reset a couple others with no problem to rule out TSTO errors. "try that address" I'll email the shop Edited January 1, 2015 by infosecwriter Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.