Having issues with Pineapple detecting SD card partitions at boot

[dunarth]

I'm having an issue with my Pineapple MkV detecting the partitions on SD cards during boot. It detects that a card is present but will not enumerate the partitions. Running an fdisk -l on the card will result in an error the first time and then properly enumerate on the second run. Formatting the card through the web portal will allow the card to be used as normal until a reboot then the partitions won't be recognized again. I've tried several cards (Kingston/Sandisk 2/4/16/32 GB) including the card that came with the pineapple and they are all experiencing the same issue.

I've updated to the latest 2.1.1 firmware and tried to do a couple of factory resets and am still seeing the issue. Is there anything I can try to make it reliably see the cards or is there some defect in the unit I was shipped?

BusyBox v1.19.4 (2014-10-09 15:57:46 PDT) built-in shell (ash)

Enter 'help' for a list of built-in commands.

.NN,

.cxxdl' xMMO 'cdxxl'

.c0WMNk;,NMMW:,xXMMKo.

...:KMMMWMMMMWMMMXc... .

, .l0NMMMNXMMMMMMMMMMMMXNMMMWKl' xWd

,0Wd .':xNMMMMMMMMMMMMMMMMNkc'. ;KM0'

lWMo .;dNMMMMMMMMMMMMMMWx:. .l. dMWc

:WWo oNd .;xKWMMMMMMMMMMMMMMMMMMMMWXx:. dWX: dMW;

,NWo oMW: .. ..,lOXWMMMMMMMMMMWN0o;.. .. cWMl dMN'

.XMx oWN; lc .loooolcooclooool. cXl oMWc kMK.

oMW' ,WMl cMW: lWMW0d:;cdd:;:o0WMWl lMW: OMW' ,WMl

0M0 xMX. .XMd .lo:.,dXMMMMMMXd,.:ol. kMK. 'NMd KMO

NMd KMk lMN. .;:xOxollccddcclloxOx:;. 'WM: OM0 xMX

WMo .XMx dMK oNMMMMWOc;;ol;;cOWMMMMNo .XMl kMK dMN

NMx 0MO :Kd. .lllcl;.:0WMMMMW0:.;lclll. .xK; 0MO kMX

__ ___ ______ _ _____ _.:W0;,oxl:::oOOo:::lxo,;0W: _ .ONo KMk

\ \ / (_| ____(_) | __ (_);cKMMMMWk:.;,.;kWMMMMKc;. | | .OX:

\ \ /\ / / _| |__ _ | |__) _ _ __ ___ __ _ _ __ _ __ | | ___ Mark V

\ \/ \/ / | | __| | | | ___| | '_ \ / _ \/ _` | '_ \| '_ \| |/ _ \ 2.1.1

\ /\ / | | | | | | | | | | | | __| (_| | |_) | |_) | | __/

\/ \/ |_|_| |_| |_| |_|_| |_|\___|\__,_| .__/| .__/|_|\___|.com

With OpenWrt ATTITUDE ADJUSTMENT | | | |

|_| |_|

root@Pineapple:~# ls /dev

bus full log mtd0 mtd1 mtd2 mtd3 mtd4 mtd5 mtdblock0 mtdblock2 mtdblock4 net port ptmx random sdcard shm ttyATH0 urandom zero

console kmsg mem mtd0ro mtd1ro mtd2ro mtd3ro mtd4ro mtd5ro mtdblock1 mtdblock3 mtdblock5 null ppp pts sda sg0 tty ttyS0 watchdog

root@Pineapple:~# fdisk -l /dev/sda

fdisk: can't open '/dev/sda': Input/output error

root@Pineapple:~# fdisk -l /dev/sda

Disk /dev/sda: 31.9 GB, 31914983424 bytes

255 heads, 63 sectors/track, 3880 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 126 3880 30162037+ 83 Linux

/dev/sda2 1 125 1004031 83 Linux

Partition table entries are not in disk order