Jump to content

[Help] Pineapple v5 charger broke now Pineapple not working proper


Nexuscrazy
 Share

Recommended Posts

Hi, I'm new here so first of Hi to everyone.

Yesterday I unplugged my charger and plugged it in somewhere else but there was no lights on my Pineapple, I checked the charger and there was no output. I rooted through my box of old chargers and found a 9v 200ma charger, I plugged it in and the lights came on, I was so relieved. But when I tried to connect i was having problems connecting to the default access point (Pineapple5_24B7). I can connect the Pineapple to my WiFi in client mode

I can ssh in I can connect by Ethernet I can restore to factory settings.

The 2 things that I cant get to work are the access point which is created but when I try to connect to it from my laptop it times out. I also had an alpha WiFi adapter plugged in by USB but for some reason in WiFi manager I clicked on remove config thinking it would reset when I plugged it back in but now it wont accept the USB adapter.

I have syslogs as well as Dmesg plus a clip from SSH window. I'll include the logs bellow in the hope someone can help me get it working fully again.

Many many thanks in advance.

------------------------------------------------------------------------------------------------------


Dmesg Output:

[ 0.000000] Linux version 3.3.8 (sebkinne@WorkstationMeltdown) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC


4.6-2012.02) ) #38 Sun Sep 7 16:40:01 CEST 2014
[ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[ 0.100000] MIPS: machine is MK5 V1.0
[ 0.350000] bio: create slab at 0
[ 0.360000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.390000] TCP reno registered
[ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.410000] PCI: CLS 0 bytes, default 32
[ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 120
[ 0.440000] io scheduler noop registered
[ 0.450000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.470000] console [ttyATH0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.490000] 5 tp-link partitions found on MTD device spi0.0
[ 0.490000] Creating 5 MTD partitions on "spi0.0":
[ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.510000] 0x000000020000-0x000000102780 : "kernel"
[ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block

-- forcing read-only
[ 0.520000] 0x000000102780-0x000000ff0000 : "rootfs"
[ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block

-- forcing read-only
[ 0.540000] mtd: partition "rootfs" set to be root filesystem
[ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=C80000, len=370000
[ 0.550000] 0x000000c80000-0x000000ff0000 : "rootfs_data"
[ 0.560000] 0x000000ff0000-0x000001000000 : "art"
[ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.590000] ag71xx_mdio: probed
[ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.160000] TCP cubic registered
[ 1.160000] NET: Registered protocol family 17
[ 1.160000] Bridge firewalling registered
[ 1.170000] 8021q: 802.1Q VLAN Support v1.8
[ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.190000] Freeing unused kernel memory: 212k freed
[ 3.470000] Registered led device: mk5:red:wlan1
[ 3.470000] Registered led device: mk5:blue:wlan0
[ 3.470000] Registered led device: mk5:amber:lan
[ 6.150000] eth0: link up (100Mbps/Full duplex)
[ 6.780000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (1

unchecked, 2 orphan) and 26 of xref (0 dead, 11 orphan) found.
[ 7.760000] SCSI subsystem initialized
[ 8.070000] usbcore: registered new interface driver usbfs
[ 8.070000] usbcore: registered new interface driver hub
[ 8.080000] usbcore: registered new device driver usb
[ 8.630000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.630000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 8.640000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 8.680000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 8.700000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 8.700000] hub 1-0:1.0: USB hub found
[ 8.700000] hub 1-0:1.0: 1 port detected
[ 8.810000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.940000] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.060000] Initializing USB Mass Storage driver...
[ 9.060000] usbcore: registered new interface driver usb-storage
[ 9.070000] USB Mass Storage support registered.
[ 9.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 9.320000] hub 1-1:1.0: USB hub found
[ 9.320000] hub 1-1:1.0: 4 ports detected
[ 9.600000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 9.820000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 9.950000] scsi0 : usb-storage 1-1.4:1.0
[ 10.950000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 11.440000] sd 0:0:0:0: [sda] 243200 512-byte logical blocks: (124 MB/118 MiB)
[ 11.450000] sd 0:0:0:0: [sda] Write Protect is off
[ 11.450000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 11.450000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.460000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.470000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.470000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.480000] sda: sda1
[ 11.490000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.490000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.500000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 29.470000] eth0: link down
[ 30.450000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[ 30.460000] Backport generated by backports.git backports-20140124-0-g1256d3e
[ 30.500000] cfg80211: Calling CRDA to update world regulatory domain
[ 30.510000] cfg80211: World regulatory domain updated:
[ 30.510000] cfg80211: DFS Master region: unset
[ 30.520000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.530000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.540000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 30.560000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 30.560000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 32.330000] usbcore: registered new interface driver rt73usb
[ 32.380000] ath: EEPROM regdomain: 0x0
[ 32.380000] ath: EEPROM indicates default country code should be used
[ 32.380000] ath: doing EEPROM country->regdmn map search
[ 32.380000] ath: country maps to regdmn code: 0x3a
[ 32.380000] ath: Country alpha2 being used: US
[ 32.380000] ath: Regpair used: 0x3a
[ 32.390000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 32.400000] Registered led device: ath9k-phy0
[ 32.400000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 32.410000] cfg80211: Calling CRDA for country: US
[ 32.410000] cfg80211: Regulatory domain changed to country: US
[ 32.410000] cfg80211: DFS Master region: FCC
[ 32.420000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.430000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 32.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
[ 32.440000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 32.450000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 32.460000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
[ 32.470000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
[ 32.470000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 32.770000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 32.770000] ieee80211 phy1: hwaddr 00:13:37:93:59:aa, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 32.800000] rtl8187: Customer ID is 0x46
[ 32.800000] Registered led device: rtl8187-phy1::radio
[ 32.800000] Registered led device: rtl8187-phy1::tx
[ 32.800000] Registered led device: rtl8187-phy1::rx
[ 32.800000] rtl8187: wireless switch is on
[ 32.800000] usbcore: registered new interface driver rtl8187
[ 32.890000] Button Hotplug driver version 0.4.1
[ 33.110000] RPC: Registered named UNIX socket transport module.
[ 33.110000] RPC: Registered udp transport module.
[ 33.120000] RPC: Registered tcp transport module.
[ 33.120000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.440000] PPP generic driver version 2.4.2
[ 33.480000] usbcore: registered new interface driver rt2800usb
[ 33.610000] tun: Universal TUN/TAP device driver, 1.6
[ 33.610000] tun: © 1999-2004 Max Krasnyansky
[ 33.970000] ip_tables: © 2000-2006 Netfilter Core Team
[ 34.190000] NET: Registered protocol family 24
[ 34.340000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
[ 35.040000] xt_time: kernel timezone is -0000
[ 35.570000] usbcore: registered new interface driver ath9k_htc
[ 35.610000] usbcore: registered new interface driver cdc_acm
[ 35.610000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 35.840000] usbcore: registered new interface driver usbserial
[ 35.840000] USB Serial support registered for generic
[ 35.850000] usbcore: registered new interface driver usbserial_generic
[ 35.850000] usbserial: USB Serial Driver core
[ 35.990000] usbcore: registered new interface driver asix
[ 36.070000] usbcore: registered new interface driver cdc_ether
[ 36.310000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 36.410000] usbcore: registered new interface driver rndis_host
[ 36.520000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.550000] USB Serial support registered for GSM modem (1-port)
[ 36.550000] usbcore: registered new interface driver option
[ 36.560000] option: v0.7.2:USB Driver for GSM modems
[ 36.580000] USB Serial support registered for pl2303
[ 36.580000] usbcore: registered new interface driver pl2303
[ 36.590000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 46.230000] device eth0 entered promiscuous mode
[ 46.690000] eth0: link up (100Mbps/Full duplex)
[ 46.690000] br-lan: port 1(eth0) entered forwarding state
[ 46.700000] br-lan: port 1(eth0) entered forwarding state
[ 48.700000] br-lan: port 1(eth0) entered forwarding state
[ 51.970000] device wlan0 entered promiscuous mode
[ 51.990000] br-lan: port 2(wlan0) entered forwarding state
[ 51.990000] br-lan: port 2(wlan0) entered forwarding state
[ 53.990000] br-lan: port 2(wlan0) entered forwarding state
[ 62.590000] wlan1: authenticate with 00:8e:f2:de:44:4c
[ 63.300000] wlan1: send auth to 00:8e:f2:de:44:4c (try 1/3)
[ 63.310000] wlan1: authenticated
[ 63.350000] wlan1: associate with 00:8e:f2:de:44:4c (try 1/3)
[ 63.410000] wlan1: RX AssocResp from 00:8e:f2:de:44:4c (capab=0x411 status=0 aid=5)
[ 63.420000] wlan1: associated


later after restoring to 1.04





Syslog Output:

Oct 13 19:36:46 Pineapple auth.info sshd[1905]: syslogin_perform_logout: logout() returned an error
Oct 13 19:29:19 Pineapple auth.info sshd[1905]: Accepted password for root from 172.16.42.42 port 50062 ssh2
Oct 13 19:29:10 Pineapple cron.err crond[1732]: time disparity of 23553808 minutes detected
Oct 13 19:29:05 Pineapple auth.info sshd[1905]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
Oct 13 19:28:31 Pineapple daemon.info dnsmasq[1828]: using local addresses only for domain lan
Oct 13 19:28:31 Pineapple daemon.info dnsmasq[1828]: using nameserver 8.8.8.8#53
Oct 13 19:28:31 Pineapple daemon.info dnsmasq[1828]: using nameserver 194.168.4.100#53
Oct 13 19:28:31 Pineapple daemon.info dnsmasq[1828]: using nameserver 194.168.8.100#53
Oct 13 19:28:31 Pineapple daemon.info dnsmasq[1828]: reading /tmp/resolv.conf.auto
Jan 1 00:00:02 Pineapple user.notice firewall: Reloading firewall due to ifup of wan (wlan1)
Jan 1 00:00:01 Pineapple daemon.notice netifd: Interface 'wan' is now up
Jan 1 00:00:01 Pineapple daemon.notice netifd: wan (1714): Lease of 192.168.0.8 obtained, lease time 86400
Jan 1 00:00:00 Pineapple daemon.notice netifd: wan (1714): Sending select for 192.168.0.8...
Jan 1 00:00:00 Pineapple user.info sysinit: Wed Jan 1 00:00:00 GMT 2014
Jan 1 00:01:09 Pineapple user.info sysinit: notify [notification text] - Sends a notification to the webinterface
Jan 1 00:01:09 Pineapple user.info sysinit: serial - Returns your serial number
Jan 1 00:01:09 Pineapple user.info sysinit: [infusion Name] [[args]] - Runs specified infusion with args if given.
Jan 1 00:01:09 Pineapple user.info sysinit: list - Lists all available infusions with a CLI component.
Jan 1 00:01:09 Pineapple user.info sysinit: infusion
Jan 1 00:01:09 Pineapple user.info sysinit: amber [on | off] - Turn's the amber LED on or off.
Jan 1 00:01:09 Pineapple user.info sysinit: red [on | off] - Turn's the red LED on or off.
Jan 1 00:01:09 Pineapple user.info sysinit: blue [on | off] - Turn's the blue LED on or off.
Jan 1 00:01:09 Pineapple user.info sysinit: reset - Reset's LED behaviour to default
Jan 1 00:01:09 Pineapple user.info sysinit: led
Jan 1 00:01:09 Pineapple user.info sysinit: del_mac [MAC] - Delete the specified MAC from the black list.
Jan 1 00:01:09 Pineapple user.info sysinit: add_mac [MAC] - Adds the specified MAC to the black list.
Jan 1 00:01:09 Pineapple user.info sysinit: del_ssid [sSID] - Delete the specified SSID from the black/white list.
Jan 1 00:01:09 Pineapple user.info sysinit: add_ssid [sSID] - Adds the specified SSID to the black/white list.
Jan 1 00:01:09 Pineapple user.info sysinit: list_macs - Lists all SSIDs in Karma's black list.
Jan 1 00:01:09 Pineapple user.info sysinit: list_ssids - Lists all SSIDs in Karma's black/white list.
Jan 1 00:01:09 Pineapple user.info sysinit: stop - Stops Karma
Jan 1 00:01:09 Pineapple user.info sysinit: start - Starts Karma
Jan 1 00:01:09 Pineapple user.info sysinit: karma
Jan 1 00:01:09 Pineapple user.info sysinit: Commands:
Jan 1 00:01:09 Pineapple user.info sysinit: A Program to controll your WiFi Pineapple over the commandline.
Jan 1 00:01:09 Pineapple user.info sysinit: Usage: pineapple [command] [[options]] [[[args]]]
Jan 1 00:01:09 Pineapple user.info sysinit: WiFi Pineapple Controller version 0.1
Jan 1 00:01:09 Pineapple user.info sysinit: setting up led wlan1
Jan 1 00:01:09 Pineapple user.info sysinit: setting up led wlan0
Jan 1 00:01:09 Pineapple user.info sysinit: setting up led ethernet
Jan 1 00:01:09 Pineapple daemon.info dnsmasq-dhcp[1828]: read /etc/ethers - 0 addresses
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: read /etc/hosts - 1 addresses
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: using local addresses only for domain lan
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: using nameserver 8.8.8.8#53
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: reading /tmp/resolv.conf.auto
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: using local addresses only for domain lan
Jan 1 00:01:09 Pineapple daemon.info dnsmasq-dhcp[1828]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP

no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Jan 1 00:01:09 Pineapple daemon.info dnsmasq[1828]: started, version 2.66 cachesize 150
Jan 1 00:01:06 Pineapple daemon.notice netifd: wan (1714): Sending discover...
Jan 1 00:01:05 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan 1 00:01:05 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918

responses!
Jan 1 00:01:04 Pineapple auth.info sshd[1767]: Server listening on 0.0.0.0 port 22.
Jan 1 00:01:03 Pineapple daemon.notice netifd: wan (1714): Sending discover...
Jan 1 00:01:03 Pineapple kern.info kernel: [ 63.420000] wlan1: associated
Jan 1 00:01:03 Pineapple kern.info kernel: [ 63.410000] wlan1: RX AssocResp from 00:8e:f2:de:44:4c (capab=0x411

status=0 aid=5)
Jan 1 00:01:03 Pineapple kern.info kernel: [ 63.350000] wlan1: associate with 00:8e:f2:de:44:4c (try 1/3)
Jan 1 00:01:03 Pineapple kern.info kernel: [ 63.310000] wlan1: authenticated
Jan 1 00:01:03 Pineapple kern.info kernel: [ 63.300000] wlan1: send auth to 00:8e:f2:de:44:4c (try 1/3)
Jan 1 00:01:02 Pineapple kern.info kernel: [ 62.590000] wlan1: authenticate with 00:8e:f2:de:44:4c
Jan 1 00:01:01 Pineapple cron.info crond[1732]: crond: crond (busybox 1.19.4) started, log level 5
Jan 1 00:01:00 Pineapple daemon.notice netifd: wan (1714): Sending discover...
Jan 1 00:01:00 Pineapple daemon.notice netifd: wan (1714): udhcpc (v1.19.4) started
Jan 1 00:01:00 Pineapple user.info sysinit: PHY for wifi device radio2 not found
Jan 1 00:00:55 Pineapple user.info sysinit: command failed: Device or resource busy (-16)
Jan 1 00:00:53 Pineapple kern.info kernel: [ 53.990000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:51 Pineapple kern.info kernel: [ 51.990000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:51 Pineapple kern.info kernel: [ 51.990000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:51 Pineapple kern.info kernel: [ 51.970000] device wlan0 entered promiscuous mode
Jan 1 00:00:50 Pineapple user.info sysinit: PHY for wifi device radio2 not found
Jan 1 00:00:49 Pineapple user.info sysinit: PHY for wifi device radio2 not found
Jan 1 00:00:48 Pineapple kern.info kernel: [ 48.700000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:46 Pineapple user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan 1 00:00:46 Pineapple kern.info kernel: [ 46.700000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:46 Pineapple kern.info kernel: [ 46.690000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:46 Pineapple kern.info kernel: [ 46.690000] eth0: link up (100Mbps/Full duplex)
Jan 1 00:00:46 Pineapple daemon.notice netifd: Interface 'loopback' is now up
Jan 1 00:00:46 Pineapple daemon.notice netifd: Interface 'lan' is now up
Jan 1 00:00:46 Pineapple kern.info kernel: [ 46.230000] device eth0 entered promiscuous mode
Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1.4:1.0: Manufacturer=Generic Product=Mass_Storage_Device

Serial=058F0O1111B1
Jan 1 00:00:41 Pineapple user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=Manufacturer_Realtek_RTL8187_

Product=RTL8187_Wireless Serial=0013379359AA
Jan 1 00:00:41 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB2.0Hub Serial=?
Jan 1 00:00:40 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd

Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.190000] NET: Registered protocol family 24
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.970000] ip_tables: © 2000-2006 Netfilter Core Team
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.610000] tun: © 1999-2004 Max Krasnyansky
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.610000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.480000] usbcore: registered new interface driver rt2800usb
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.440000] PPP generic driver version 2.4.2
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.120000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.120000] RPC: Registered tcp transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.110000] RPC: Registered udp transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.110000] RPC: Registered named UNIX socket transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.890000] Button Hotplug driver version 0.4.1
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.800000] usbcore: registered new interface driver rtl8187
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.800000] rtl8187: wireless switch is on
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.800000] Registered led device: rtl8187-phy1::rx
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.800000] Registered led device: rtl8187-phy1::tx
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.800000] Registered led device: rtl8187-phy1::radio
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.800000] rtl8187: Customer ID is 0x46
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.770000] ieee80211 phy1: hwaddr 00:13:37:93:59:aa, RTL8187vB (default)

V1 + rtl8225z2, rfkill mask 2
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.770000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.470000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,

4000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.470000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi,

3000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.460000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi,

2400 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.450000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi,

2400 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.440000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi,

2400 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi,

1700 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.430000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

2700 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.420000] cfg80211: (start_freq - end_freq @ bandwidth),

(max_antenna_gain, max_eirp)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.410000] cfg80211: DFS Master region: FCC
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.410000] cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.410000] cfg80211: Calling CRDA for country: US
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.400000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.400000] Registered led device: ath9k-phy0
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 3.470000] Registered led device: mk5:amber:lan
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 3.470000] Registered led device: mk5:blue:wlan0
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 3.470000] Registered led device: mk5:red:wlan1
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.190000] Freeing unused kernel memory: 212k freed
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device

31:2.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 1.160000] Bridge firewalling registered
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.160000] NET: Registered protocol family 17
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.160000] TCP cubic registered
Jan 1 00:00:38 Pineapple kern.info kernel: [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04

[uid=004dd041, driver=Generic PHY]
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.590000] ag71xx_mdio: probed
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.550000] 0x000000c80000-0x000000ff0000 : "rootfs_data"
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=C80000,

len=370000
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.540000] mtd: partition "rootfs" set to be root filesystem
Jan 1 00:00:38 Pineapple kern.warn kernel: [ 0.530000] mtd: partition "rootfs" must either start or end on erase block

boundary or be smaller than an erase block -- forcing read-only
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.520000] 0x000000102780-0x000000ff0000 : "rootfs"
Jan 1 00:00:38 Pineapple kern.warn kernel: [ 0.510000] mtd: partition "kernel" must either start or end on erase block

boundary or be smaller than an erase block -- forcing read-only
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.510000] 0x000000020000-0x000000102780 : "kernel"
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.490000] Creating 5 MTD partitions on "spi0.0":
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
Jan 1 00:00:38 Pineapple kern.warn kernel: [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X

UART
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.450000] io scheduler deadline registered (default)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.440000] io scheduler noop registered
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.440000] msgmni has been set to 120
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)

(CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 0.410000] PCI: CLS 0 bytes, default 32
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.400000] NET: Registered protocol family 1
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.390000] TCP reno registered
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384

bytes)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)




later after restoring to 1.04

Syslog Output:

Oct 13 22:01:33 Pineapple cron.err crond[1739]: time disparity of 411720 minutes detected
Oct 13 22:01:30 Pineapple daemon.info dnsmasq-dhcp[2666]: read /etc/ethers - 0 addresses
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: read /etc/hosts - 1 addresses
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: using local addresses only for domain lan
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: using nameserver 8.8.8.8#53
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: using nameserver 194.168.4.100#53
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: using nameserver 194.168.8.100#53
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: reading /tmp/resolv.conf.auto
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: using local addresses only for domain lan
Oct 13 22:01:30 Pineapple daemon.info dnsmasq-dhcp[2666]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP

no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Oct 13 22:01:30 Pineapple daemon.info dnsmasq[2666]: started, version 2.66 cachesize 150
Oct 13 22:01:27 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Oct 13 22:01:27 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918

responses!
Oct 13 22:01:25 Pineapple daemon.info dnsmasq[1825]: exiting on receipt of SIGTERM
Jan 1 00:01:05 Pineapple daemon.info dnsmasq[1825]: using local addresses only for domain lan
Jan 1 00:01:05 Pineapple daemon.info dnsmasq[1825]: using nameserver 8.8.8.8#53
Jan 1 00:01:05 Pineapple daemon.info dnsmasq[1825]: using nameserver 194.168.4.100#53
Jan 1 00:01:05 Pineapple daemon.info dnsmasq[1825]: using nameserver 194.168.8.100#53
Jan 1 00:01:05 Pineapple daemon.info dnsmasq[1825]: reading /tmp/resolv.conf.auto
Jan 1 00:01:02 Pineapple user.notice firewall: Reloading firewall due to ifup of wan (wlan1)
Jan 1 00:01:01 Pineapple daemon.notice netifd: Interface 'wan' is now up
Jan 1 00:01:01 Pineapple daemon.notice netifd: wan (2457): Lease of 192.168.0.8 obtained, lease time 86400
Jan 1 00:01:00 Pineapple daemon.notice netifd: wan (2457): Sending select for 192.168.0.8...
Jan 1 00:01:00 Pineapple daemon.notice netifd: wan (2457): Sending discover...
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.720000] wlan1: associated
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.710000] wlan1: RX AssocResp from 00:8e:f2:de:44:4c (capab=0x411

status=0 aid=5)
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.700000] wlan1: associate with 00:8e:f2:de:44:4c (try 1/3)
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.690000] wlan1: authenticated
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.680000] wlan1: send auth to 00:8e:f2:de:44:4c (try 1/3)
Jan 1 00:00:58 Pineapple kern.info kernel: [ 125.350000] wlan1: authenticate with 00:8e:f2:de:44:4c
Jan 1 00:00:57 Pineapple daemon.notice netifd: wan (2457): Sending discover...
Jan 1 00:00:57 Pineapple daemon.notice netifd: wan (2457): udhcpc (v1.19.4) started
Jan 1 00:00:54 Pineapple cron.err crond[1739]: time disparity of 23142239 minutes detected
Jan 1 00:00:51 Pineapple kern.info kernel: [ 118.780000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:49 Pineapple kern.info kernel: [ 116.780000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:49 Pineapple kern.info kernel: [ 116.770000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:49 Pineapple kern.info kernel: [ 116.630000] device wlan0 entered promiscuous mode
Jan 1 00:00:47 Pineapple kern.info kernel: [ 114.980000] br-lan: port 2(wlan0) entered disabled state
Jan 1 00:00:47 Pineapple kern.info kernel: [ 114.980000] device wlan0 left promiscuous mode
Jan 1 00:00:00 Pineapple user.info sysinit: Wed Jan 1 00:00:00 UTC 2014
Jan 1 00:01:07 Pineapple user.info sysinit: serial - Returns your serial number
Jan 1 00:01:07 Pineapple user.info sysinit: [infusion Name] [[args]] - Runs specified infusion with args if given.
Jan 1 00:01:07 Pineapple user.info sysinit: list - Lists all available infusions with a CLI component.
Jan 1 00:01:07 Pineapple user.info sysinit: infusion
Jan 1 00:01:07 Pineapple user.info sysinit: amber [on | off] - Turn's the amber LED on or off.
Jan 1 00:01:07 Pineapple user.info sysinit: red [on | off] - Turn's the red LED on or off.
Jan 1 00:01:07 Pineapple user.info sysinit: blue [on | off] - Turn's the blue LED on or off.
Jan 1 00:01:07 Pineapple user.info sysinit: reset - Reset's LED behaviour to default
Jan 1 00:01:07 Pineapple user.info sysinit: led
Jan 1 00:01:07 Pineapple user.info sysinit: del_mac [MAC] - Delete the specified MAC from the black list.
Jan 1 00:01:07 Pineapple user.info sysinit: add_mac [MAC] - Adds the specified MAC to the black list.
Jan 1 00:01:07 Pineapple user.info sysinit: del_ssid [sSID] - Delete the specified SSID from the black/white list.
Jan 1 00:01:07 Pineapple user.info sysinit: add_ssid [sSID] - Adds the specified SSID to the black/white list.
Jan 1 00:01:07 Pineapple user.info sysinit: list_macs - Lists all SSIDs in Karma's black list.
Jan 1 00:01:07 Pineapple user.info sysinit: list_ssids - Lists all SSIDs in Karma's black/white list.
Jan 1 00:01:07 Pineapple user.info sysinit: stop - Stops Karma
Jan 1 00:01:07 Pineapple user.info sysinit: start - Starts Karma
Jan 1 00:01:07 Pineapple user.info sysinit: karma
Jan 1 00:01:07 Pineapple user.info sysinit: Commands:
Jan 1 00:01:07 Pineapple user.info sysinit: A Program to controll your WiFi Pineapple over the commandline.
Jan 1 00:01:07 Pineapple user.info sysinit: Usage: pineapple [command] [[options]] [[[args]]]
Jan 1 00:01:07 Pineapple user.info sysinit: WiFi Pineapple Controller version 0.1
Jan 1 00:01:06 Pineapple user.info sysinit: setting up led wlan1
Jan 1 00:01:06 Pineapple user.info sysinit: setting up led wlan0
Jan 1 00:01:06 Pineapple user.info sysinit: setting up led ethernet
Jan 1 00:01:06 Pineapple daemon.info dnsmasq-dhcp[1825]: read /etc/ethers - 0 addresses
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: read /etc/hosts - 1 addresses
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: using local addresses only for domain lan
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: using nameserver 8.8.8.8#53
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: reading /tmp/resolv.conf.auto
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: using local addresses only for domain lan
Jan 1 00:01:06 Pineapple daemon.info dnsmasq-dhcp[1825]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP

no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Jan 1 00:01:06 Pineapple daemon.info dnsmasq[1825]: started, version 2.66 cachesize 150
Jan 1 00:01:03 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan 1 00:01:03 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918

responses!
Jan 1 00:00:58 Pineapple auth.info sshd[1745]: Server listening on 0.0.0.0 port 22.
Jan 1 00:00:57 Pineapple cron.info crond[1739]: crond: crond (busybox 1.19.4) started, log level 5
Jan 1 00:00:57 Pineapple user.info sysinit: Failed to start hostapd for phy1
Jan 1 00:00:51 Pineapple kern.info kernel: [ 51.330000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:50 Pineapple kern.info kernel: [ 50.950000] Adding 1000164k swap on /dev/sda2. Priority:-1 extents:1

across:1000164k
Jan 1 00:00:49 Pineapple kern.info kernel: [ 49.330000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:49 Pineapple kern.info kernel: [ 49.330000] br-lan: port 2(wlan0) entered forwarding state
Jan 1 00:00:49 Pineapple kern.info kernel: [ 49.230000] device wlan0 entered promiscuous mode
Jan 1 00:00:46 Pineapple kern.info kernel: [ 46.740000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:44 Pineapple kern.info kernel: [ 44.740000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:44 Pineapple kern.info kernel: [ 44.730000] br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:44 Pineapple kern.info kernel: [ 44.730000] eth0: link up (100Mbps/Full duplex)
Jan 1 00:00:44 Pineapple user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan 1 00:00:44 Pineapple daemon.notice netifd: Interface 'loopback' is now up
Jan 1 00:00:44 Pineapple daemon.notice netifd: Interface 'lan' is now up
Jan 1 00:00:44 Pineapple kern.info kernel: [ 44.020000] device eth0 entered promiscuous mode
Jan 1 00:00:43 Pineapple user.notice usb-modeswitch: 1-1.4:1.0: Manufacturer=Generic Product=Mass_Storage_Device

Serial=058F0O1111B1
Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=Manufacturer_Realtek_RTL8187_

Product=RTL8187_Wireless Serial=0013379359AA
Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB2.0Hub Serial=?
Jan 1 00:00:41 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd

Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.800000] pl2303: Prolific PL2303 USB to serial adaptor driver
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.790000] usbcore: registered new interface driver pl2303
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.790000] USB Serial support registered for pl2303
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.770000] option: v0.7.2:USB Driver for GSM modems
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.760000] usbcore: registered new interface driver option
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.760000] USB Serial support registered for GSM modem (1-port)
Jan 1 00:00:38 Pineapple kern.notice kernel: [ 36.730000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.630000] usbcore: registered new interface driver rndis_host
Jan 1 00:00:38 Pineapple kern.err kernel: [ 36.530000] Error: Driver 'gpio-keys-polled' is already registered,

aborting...
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.280000] usbcore: registered new interface driver cdc_ether
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.220000] usbcore: registered new interface driver asix
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.080000] usbserial: USB Serial Driver core
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.080000] usbcore: registered new interface driver usbserial_generic
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.070000] USB Serial support registered for generic
Jan 1 00:00:38 Pineapple kern.info kernel: [ 36.070000] usbcore: registered new interface driver usbserial
Jan 1 00:00:38 Pineapple kern.info kernel: [ 35.830000] usbcore: registered new interface driver ath9k_htc
Jan 1 00:00:38 Pineapple kern.info kernel: [ 35.320000] xt_time: kernel timezone is -0000
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.750000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.590000] NET: Registered protocol family 24
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.370000] ip_tables: © 2000-2006 Netfilter Core Team
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.010000] tun: © 1999-2004 Max Krasnyansky
Jan 1 00:00:38 Pineapple kern.info kernel: [ 34.000000] tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.860000] PPP generic driver version 2.4.2
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.310000] RPC: Registered tcp transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.310000] RPC: Registered udp transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.300000] RPC: Registered named UNIX socket transport module.
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.090000] Button Hotplug driver version 0.4.1
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.010000] usbcore: registered new interface driver rtl8187
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.010000] rtl8187: wireless switch is on
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 33.000000] Registered led device: rtl8187-phy1::rx
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 33.000000] Registered led device: rtl8187-phy1::tx
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 33.000000] Registered led device: rtl8187-phy1::radio
Jan 1 00:00:38 Pineapple kern.info kernel: [ 33.000000] rtl8187: Customer ID is 0x46
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.970000] ieee80211 phy1: hwaddr 00:13:37:93:59:aa, RTL8187vB (default)

V1 + rtl8225z2, rfkill mask 2
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.970000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.680000] usbcore: registered new interface driver rt2800usb
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

3000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.640000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.630000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

1700 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

2700 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.600000] cfg80211: (start_freq - end_freq @ bandwidth),

(max_antenna_gain, max_eirp)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.590000] cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.590000] cfg80211: Calling CRDA for country: US
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.580000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.580000] Registered led device: ath9k-phy0
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.580000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: Regpair used: 0x3a
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: Country alpha2 being used: US
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: country maps to regdmn code: 0x3a
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: doing EEPROM country->regdmn map search
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: EEPROM indicates default country code should be used
Jan 1 00:00:38 Pineapple kern.debug kernel: [ 32.570000] ath: EEPROM regdomain: 0x0
Jan 1 00:00:38 Pineapple kern.info kernel: [ 32.520000] usbcore: registered new interface driver rt73usb
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.730000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.730000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,

2000 mBm)
Jan 1 00:00:38 Pineapple kern.info kernel: [ 30.710000] cfg80211: (start_freq - end_freq @ bandwidth),

(max_antenna_gain, max_eirp)
AutoSSH[-]
AutoSSH: Disconnected. | Connect
Autostart: Disabled. | Enable
Pineapple Bar[-]
Refresh this tile to check for system updates.




Dmesg Output:

[ 0.000000] Linux version 3.3.8 (sebkinne@WorstationMeltdown) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6

-2012.02) ) #14 Fri Mar 28 01:15:34 CET 2014
[ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61596k/65536k available (2124k kernel code, 3940k reserved, 405k data, 208k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[ 0.100000] MIPS: machine is MK5 V1.0
[ 0.350000] bio: create slab at 0
[ 0.360000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.390000] TCP reno registered
[ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.410000] PCI: CLS 0 bytes, default 32
[ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 120
[ 0.440000] io scheduler noop registered
[ 0.450000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.460000] console [ttyATH0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.490000] 5 tp-link partitions found on MTD device spi0.0
[ 0.490000] Creating 5 MTD partitions on "spi0.0":
[ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.510000] 0x000000020000-0x000000102760 : "kernel"
[ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block

-- forcing read-only
[ 0.520000] 0x000000102760-0x000000ff0000 : "rootfs"
[ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block

-- forcing read-only
[ 0.540000] mtd: partition "rootfs" set to be root filesystem
[ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=C20000, len=3D0000
[ 0.550000] 0x000000c20000-0x000000ff0000 : "rootfs_data"
[ 0.560000] 0x000000ff0000-0x000001000000 : "art"
[ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.590000] ag71xx_mdio: probed
[ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.160000] TCP cubic registered
[ 1.160000] NET: Registered protocol family 17
[ 1.160000] Bridge firewalling registered
[ 1.170000] 8021q: 802.1Q VLAN Support v1.8
[ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.180000] Freeing unused kernel memory: 208k freed
[ 3.680000] Registered led device: mk5:red:wlan1
[ 3.680000] Registered led device: mk5:blue:wlan0
[ 3.680000] Registered led device: mk5:amber:lan
[ 6.150000] eth0: link up (100Mbps/Full duplex)
[ 6.990000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 8 of xdatum (2

unchecked, 6 orphan) and 47 of xref (0 dead, 30 orphan) found.
[ 7.960000] SCSI subsystem initialized
[ 8.270000] usbcore: registered new interface driver usbfs
[ 8.270000] usbcore: registered new interface driver hub
[ 8.280000] usbcore: registered new device driver usb
[ 8.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.840000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 8.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 8.890000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 8.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 8.910000] hub 1-0:1.0: USB hub found
[ 8.910000] hub 1-0:1.0: 1 port detected
[ 9.030000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.160000] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.280000] Initializing USB Mass Storage driver...
[ 9.280000] usbcore: registered new interface driver usb-storage
[ 9.290000] USB Mass Storage support registered.
[ 9.390000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 9.540000] hub 1-1:1.0: USB hub found
[ 9.540000] hub 1-1:1.0: 4 ports detected
[ 9.820000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 10.040000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 10.170000] scsi0 : usb-storage 1-1.4:1.0
[ 11.170000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 11.720000] sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
[ 11.720000] sd 0:0:0:0: [sda] Write Protect is off
[ 11.730000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 11.730000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.730000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.740000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.750000] sda: sda1 sda2
[ 11.760000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.770000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.770000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 29.700000] eth0: link down
[ 30.650000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 30.660000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 30.700000] cfg80211: Calling CRDA to update world regulatory domain
[ 30.710000] cfg80211: World regulatory domain updated:
[ 30.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.730000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.730000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.520000] usbcore: registered new interface driver rt73usb
[ 32.570000] ath: EEPROM regdomain: 0x0
[ 32.570000] ath: EEPROM indicates default country code should be used
[ 32.570000] ath: doing EEPROM country->regdmn map search
[ 32.570000] ath: country maps to regdmn code: 0x3a
[ 32.570000] ath: Country alpha2 being used: US
[ 32.570000] ath: Regpair used: 0x3a
[ 32.580000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 32.580000] Registered led device: ath9k-phy0
[ 32.580000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 32.590000] cfg80211: Calling CRDA for country: US
[ 32.590000] cfg80211: Regulatory domain changed to country: US
[ 32.600000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.600000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 32.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 32.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.630000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.640000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 32.680000] usbcore: registered new interface driver rt2800usb
[ 32.970000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 32.970000] ieee80211 phy1: hwaddr 00:13:37:93:59:aa, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 33.000000] rtl8187: Customer ID is 0x46
[ 33.000000] Registered led device: rtl8187-phy1::radio
[ 33.000000] Registered led device: rtl8187-phy1::tx
[ 33.000000] Registered led device: rtl8187-phy1::rx
[ 33.010000] rtl8187: wireless switch is on
[ 33.010000] usbcore: registered new interface driver rtl8187
[ 33.090000] Button Hotplug driver version 0.4.1
[ 33.300000] RPC: Registered named UNIX socket transport module.
[ 33.310000] RPC: Registered udp transport module.
[ 33.310000] RPC: Registered tcp transport module.
[ 33.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.860000] PPP generic driver version 2.4.2
[ 34.000000] tun: Universal TUN/TAP device driver, 1.6
[ 34.010000] tun: © 1999-2004 Max Krasnyansky
[ 34.370000] ip_tables: © 2000-2006 Netfilter Core Team
[ 34.590000] NET: Registered protocol family 24
[ 34.750000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
[ 35.320000] xt_time: kernel timezone is -0000
[ 35.830000] usbcore: registered new interface driver ath9k_htc
[ 36.070000] usbcore: registered new interface driver usbserial
[ 36.070000] USB Serial support registered for generic
[ 36.080000] usbcore: registered new interface driver usbserial_generic
[ 36.080000] usbserial: USB Serial Driver core
[ 36.220000] usbcore: registered new interface driver asix
[ 36.280000] usbcore: registered new interface driver cdc_ether
[ 36.530000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 36.630000] usbcore: registered new interface driver rndis_host
[ 36.730000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.760000] USB Serial support registered for GSM modem (1-port)
[ 36.760000] usbcore: registered new interface driver option
[ 36.770000] option: v0.7.2:USB Driver for GSM modems
[ 36.790000] USB Serial support registered for pl2303
[ 36.790000] usbcore: registered new interface driver pl2303
[ 36.800000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 44.020000] device eth0 entered promiscuous mode
[ 44.730000] eth0: link up (100Mbps/Full duplex)
[ 44.730000] br-lan: port 1(eth0) entered forwarding state
[ 44.740000] br-lan: port 1(eth0) entered forwarding state
[ 46.740000] br-lan: port 1(eth0) entered forwarding state
[ 49.230000] device wlan0 entered promiscuous mode
[ 49.330000] br-lan: port 2(wlan0) entered forwarding state
[ 49.330000] br-lan: port 2(wlan0) entered forwarding state
[ 50.950000] Adding 1000164k swap on /dev/sda2. Priority:-1 extents:1 across:1000164k
[ 51.330000] br-lan: port 2(wlan0) entered forwarding state
[ 114.980000] device wlan0 left promiscuous mode
[ 114.980000] br-lan: port 2(wlan0) entered disabled state
[ 116.630000] device wlan0 entered promiscuous mode
[ 116.770000] br-lan: port 2(wlan0) entered forwarding state
[ 116.780000] br-lan: port 2(wlan0) entered forwarding state
[ 118.780000] br-lan: port 2(wlan0) entered forwarding state
[ 125.350000] wlan1: authenticate with 00:8e:f2:de:44:4c
[ 125.680000] wlan1: send auth to 00:8e:f2:de:44:4c (try 1/3)
[ 125.690000] wlan1: authenticated
[ 125.700000] wlan1: associate with 00:8e:f2:de:44:4c (try 1/3)
[ 125.710000] wlan1: RX AssocResp from 00:8e:f2:de:44:4c (capab=0x411 status=0 aid=5)
[ 125.720000] wlan1: associated


root@Pineapple:~# iwconfig
lo no wireless extensions.

wlan1 IEEE 802.11bg ESSID:"virginmedia4705251"
Mode:Managed Frequency:2.447 GHz Access Point: 00:8E:F2:DE:44:4C
Bit Rate=12 Mb/s Tx-Power=27 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

wlan0 IEEE 802.11bgn Mode:Master Tx-Power=18 dBm
RTS thr:off Fragment thr:off
Power Management:off

eth0 no wireless extensions.

Link to comment
Share on other sites

[ Fixed ]

Yeah it was down to the power supply, I had 2 chargers 1 was 9 volt at 2 amps and the other 9 volts at 1 amp, however after checking them one was throwing out 14 volts and the other just over 13 volts, I've been out and bought a multi charger and set it to 9 volts 1.7 amps and now all is back to normal.

Strange I could understand not putting enough volts through causing things to shut down but putting 14 volts through I would of thought would of either blown it or just worked.

A word of caution. Just because a charger says 9 volts doesn't mean its putting 9 volts out , well at least that was the case with 2 chargers I had knocking about.

Link to comment
Share on other sites

When I say 1 amp and 2 amp it says 100ma and 200ma which I thought meant 1 amp and 2 amp, me bad, I'll research more next time but I'm happy now,

Hak5 really need an outlet in the UK, It would make buying there products and replacement parts so much easier.

Thanks everyone for the info.

Marc

Link to comment
Share on other sites

I've got the choice with this new charger of

7.5 volt - 2 amps

9 volt - 1.7 amps

12 volt - 1.7 amps

13.2 volts - 1.5 amps

What would be the best to go with? I'm using 9 volts 1.7 amp at the moment and all is working fine.

Thanks

9V 1.7A is fine, as long as you have ~10W of power.

Do not go over 12V though.

Best Regards,

Sebkinne

Link to comment
Share on other sites

Probably slightly more nuanced than that due to regulator dropout voltages etc.

To ensure a full 5 volts on the USB ports (and make sure USB peripherals behave well consistently) you'd probably need an extra 1 to 1.5V (I'd need to work out what regulator is used and look at the data sheets to be sure).

Also depending on the PSU used, the higher the voltage, the higher amount of energy will be lost due to heat as the voltage is stepped down.

So, 7.5 volt @ 2 amps or 9 volt @ 1.7 amps are probably the best out of the options you suggested - high enough to be properly regulated to 5V yet not so high as to waste energy as heat.

If I could be bothered (and I can't) I'd hook a MKV up to a bench power supply and see how how much current is pulled at different voltages - it would also be interesting to see the temperature of things on the PCB with a thermal imaging camera.

Link to comment
Share on other sites

W = A(V)

MK5 accepts 5V - 12V and requires ~10W

So 5V @ 2A = 10W

Or 12V @ 1A = 12W

Thanks a lot Darren, (I I like the example, handy to know).This is my first Pineapple and I'm a bit of a newbie with Linux I'm not a complete newbie but I've still got a good bit to learn Anyway keep up the good work and more Videos on the Pineapple V5 would be nice.

Marc

-----------------------------------------------------------------------

9V 1.7A is fine, as long as you have ~10W of power.

Do not go over 12V though.

Best Regards,

Sebkinne

Thanks for explaining that, I'ts working fine at 9 volt @ 1.7 amp at the moment so I'll leave it here for now.

Many thanks

Marc

----------------------------------------------------------------------------------------------------

Link to comment
Share on other sites

Power Supply / charger terms are often used interchangeably.

There will be an on-board regulator (or more likely 2 for the different rails) on the Pineapple PCB so everything is fine so long as you use something that outputs a reliable voltage / current in the range supported by the relevant regulators.

The bench power supply (which is totally overkill for powering a pineapple where a cheap wall wart is fine) can provide a really stable lab quality output. You can then use this to set an exact voltage and see just how much current is pulled. This can be used to characterize the Pineapples behavior and determine optimum voltages and see how, for example, adding an external wifi adapter changes the current / power requirements.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...