BeNe Posted October 4, 2014 Posted October 4, 2014 Hi there,i have some pineapple tango mode question. I'm useing the pineapple plug and an Alfa from the hakshop.Enabled tango mode on PA2 with: uci set network.lan.ipaddr=172.16.42.2 uci set network.lan.gateway=172.16.42.1 uci commit network Tango mode works fine.Pineapple 1 + connected AlfaPA1 is connected with wlan1 to my Router (ICS)wlan 0 is unsed (it is in AP mode per default ?!)wlan 2 (Alfa) does deauth (whitelisted both PA + Router)Pineapple 2wlan0 -> collect clients (AP)wlan1 is unsedMK5 Karma & PineAP are enabled wlan2 on PA1 is not needed because wlan0 can do the same ? sslstrip should run on PA1 (Gateway for PA2) or PA2 ?Is there a better loadbalacing for the services ?DNS Spoof and URLSnarf on PA1 or PA2 ?wlan2 suggestions ? Greez BeNe Quote
Oli Posted October 8, 2014 Posted October 8, 2014 The whole tango thing is pretty half baked at the moment as far as I can tell... Perhaps check back when the pineapple plug gains some more traction. Essentially you have just two networked devices with the pineapple plug - nothing special or clever. Software needs to be written to make the most of this configuration for the pineapple - this takes time and hasn't been done yet. Quote
BeNe Posted October 15, 2014 Author Posted October 15, 2014 Sebkinne, can you explain me the best solution for the tango mode ? I'm sure the new firmware will handle the tango mode (more easier) Thanks, BeNe Quote
BeNe Posted October 20, 2014 Author Posted October 20, 2014 Somebody else uses the TangoMode ? I'm playing around with it since i get no answer for my question. Seems that sslstrip in some situations kill the uplink or the iptables from PA1 <-> PA2. Here are (still) unanswered questions: wlan2 on PA1 is not needed because wlan0 can do the same ? sslstrip should run on PA1 (Gateway for PA2) or PA2 ? Is there a better loadbalacing for the services ? DNS Spoof and URLSnarf on PA1 or PA2 ? wlan2 suggestions ? Quote
BeNe Posted October 26, 2014 Author Posted October 26, 2014 The load in TangeMode is still to heavy -> Pineapples are rebooting Clients recieve a timeout when they are surfing. Does it make more sense that PineApple2 runs pineAP and Karma and PineApple1 does ICS ? So can i select on which Pineapple SSLStrip, URLSnarf is running because PineApple1 is the Gateway and the data need to go through it from Pineapple2. I can catch the data on Pineapple2 or catch them on Pineapple. Right ? Suggestions ? Answer for my questions ? Quote
BeNe Posted February 16, 2015 Author Posted February 16, 2015 Does any pineapple user uses the pineapple plug ? Looks as though I had my money thrown out the window! Quote
White Lord Posted March 4, 2015 Posted March 4, 2015 BeNe, I just bought the Pineapple Plug and I'm going to play around with it. I hope we both didn't throw our money out the window!! I'll let you know what I find. Quote
kpoeticg Posted May 11, 2015 Posted May 11, 2015 I grabbed the Pineapple Plug and a 2nd MKV around XMAS, along with the Ominous Box and the Pineapple HDK lol. I haven't made use out of any of it. There was mention about better Tango function for the Plug in a fw release back when i bought it as well as a Hak5 segment about the HDK, dunno if that's still in the picture (I hope so). I had the same rebooting problems as you. Til the load balancing gets sorted out, it's just more problems than it's worth. Hopefully someday i'll use em. Once i saw the ominous Box in person i laughed my ass off tho. I call it the "Biggest Most Obvious Little Dropbox In Texas" lol. It takes up like half the wall, i think it was on sale for like 10 bux tho so it's all good. The Plug & HDK are good ideas tho, just need a little attention. It's not like there's a whole army of people working on development of Pineapple/Hak5 niches tho. I'm dyin to find out what the Turtle's gonna end up being. I have no idea what it is, but i know Darren's gonna make it look like something that i need in my life, then Shannon's gonna get all excited about it, then i'm gonna punch in my credit card for em again Quote
BeNe Posted September 15, 2015 Author Posted September 15, 2015 (edited) @Sebkinne @Darren Kitchen will the "Tango-Mode" ever be available in a future Firmware ? I ask the same question again and again for about ~1 year without any comment - that´s hard Seb said in the Video "WiFi Pineapple 2.0.2 Firmware - PineAP" on Youtube "The firmware we will bring it out will make it super easy..." Here is the part @ 37m --> So, what happend ? Edited September 15, 2015 by BeNe Quote
neep3r Posted March 2, 2016 Posted March 2, 2016 Surprised there have been zero updates regarding Tango Mode... What happened? Quote
NovaSam Posted May 3, 2016 Posted May 3, 2016 Yeah I was kind of curious about that as well. :( Kind of a waste for the plug. Have two Mark Vs and a plug. It was fun but really had a lot of issues with the hardware regardless. They work fine, but I'll probably find a dedicated use for my Mark Vs and work more with my nano. If I ever get the resources and approval from the wife I might get the Tetra. Quote
Mr.miYagi Posted September 18, 2016 Posted September 18, 2016 Same here. Buyed a plug and waited for support. Never could get something usefull out of this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.