Jump to content

Pantech UML290 (Verizon) Issue


Cozmo
 Share

Recommended Posts

I'm aware that the UML290 is listed as "unsupported", but in the special case that someone has resolved the issue I'm having that would be "bitchin' Camero".

My goal is to put the Mk5 on my Witespy 550 Quad and do some "legal" stuff. I'm not to cool w/ placing my Samsung s5 on the bird, cuz I'm really borrowing it from the ground.

Issue: When I connect the 290 to the MK5 and attempt to redial in the broadband menu I get the following error.

send (ATDT#777^M)
expect (CONNECT)
^M
^M
ERROR
-- failed
Failed (ERROR)
Connect script failed
I have looked all over the forums and found some great info, but I'm just a router jockey getting my pineapple on. I have attempted to use the custom param /dev/ttyACM0 instead of ttyUSB0-3, vzwinternet APN in place w/ user/pass and w/o. Added the vendor target id (0x106c:0x3718) to the usb_modeswitch stuff.
network.wan2=interface
network.wan2.ifname=ppp0
network.wan2.proto=3g
network.wan2.service=cdma or evdo
network.wan2.device=/dev/ttyACM0 or USB0
network.wan2.apn= [empty or vzwinternet]
network.wan2.username=
network.wan2.password=
network.wan2.defaultroute=1
network.wan2.ppp_redial=persist
network.wan2.peerdns=1
network.wan2.dns=
network.wan2.keepalive=1
network.wan2.pppd_options=
Thanks in advance if you can hook a dude up. No big if not.
More stuff
Jan 1 00:06:03 Pineapple kern.info kernel: [ 430.860000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
Jan 1 00:06:03 Pineapple kern.info kernel: [ 430.990000] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
Jan 1 00:06:03 Pineapple user.notice usb-modeswitch: 1-1.2:1.0: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
Jan 1 00:06:04 Pineapple user.notice usb-modeswitch: 1-1.2:1.1: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
Jan 1 00:06:04 Pineapple user.notice usb-modeswitch: 1-1.2:1.2: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
Jan 1 00:06:04 Pineapple user.notice usb-modeswitch: 1-1.2:1.3: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
Jan 1 00:06:04 Pineapple user.notice usb-modeswitch: 1-1.2:1.4: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
Jan 1 00:06:05 Pineapple user.notice usb-modeswitch: 1-1.2:1.5: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=?
dmesg
[ 0.000000] Linux version 3.3.8 (sebkinne@WorstationMeltdown) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #31 Thu Aug 14 23:30:25 CEST 2014
[ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00004000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00004000
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[ 0.100000] MIPS: machine is MK5 V1.0
[ 0.350000] bio: create slab <bio-0> at 0
[ 0.360000] Switching to clocksource MIPS
[ 0.360000] NET: Registered protocol family 2
[ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.390000] TCP reno registered
[ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.410000] PCI: CLS 0 bytes, default 32
[ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 120
[ 0.440000] io scheduler noop registered
[ 0.450000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.470000] console [ttyATH0] enabled, bootconsole disabled
[ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.490000] 5 tp-link partitions found on MTD device spi0.0
[ 0.490000] Creating 5 MTD partitions on "spi0.0":
[ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.510000] 0x000000020000-0x000000102730 : "kernel"
[ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.520000] 0x000000102730-0x000000ff0000 : "rootfs"
[ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.540000] mtd: partition "rootfs" set to be root filesystem
[ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=C80000, len=370000
[ 0.550000] 0x000000c80000-0x000000ff0000 : "rootfs_data"
[ 0.560000] 0x000000ff0000-0x000001000000 : "art"
[ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.590000] ag71xx_mdio: probed
[ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.160000] TCP cubic registered
[ 1.160000] NET: Registered protocol family 17
[ 1.160000] Bridge firewalling registered
[ 1.170000] 8021q: 802.1Q VLAN Support v1.8
[ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.180000] Freeing unused kernel memory: 212k freed
[ 3.530000] Registered led device: mk5:red:wlan1
[ 3.540000] Registered led device: mk5:blue:wlan0
[ 3.540000] Registered led device: mk5:amber:lan
[ 6.850000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 2 orphan) and 24 of xref (0 dead, 9 orphan) found.
[ 7.150000] eth0: link up (100Mbps/Full duplex)
[ 7.820000] SCSI subsystem initialized
[ 8.120000] usbcore: registered new interface driver usbfs
[ 8.130000] usbcore: registered new interface driver hub
[ 8.130000] usbcore: registered new device driver usb
[ 8.680000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.690000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 8.690000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 8.730000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 8.750000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 8.750000] hub 1-0:1.0: USB hub found
[ 8.750000] hub 1-0:1.0: 1 port detected
[ 8.860000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.990000] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.110000] Initializing USB Mass Storage driver...
[ 9.110000] usbcore: registered new interface driver usb-storage
[ 9.120000] USB Mass Storage support registered.
[ 9.220000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 9.370000] hub 1-1:1.0: USB hub found
[ 9.370000] hub 1-1:1.0: 4 ports detected
[ 9.650000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 9.890000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 10.020000] scsi0 : usb-storage 1-1.4:1.0
[ 11.020000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 11.540000] sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
[ 11.550000] sd 0:0:0:0: [sda] Write Protect is off
[ 11.550000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 11.550000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.560000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.570000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.570000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.580000] sda: sda1
[ 11.590000] sd 0:0:0:0: [sda] No Caching mode page present
[ 11.590000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 11.600000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 29.590000] eth0: link down
[ 30.580000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[ 30.590000] Backport generated by backports.git backports-20140124-0-g1256d3e
[ 30.700000] cfg80211: Calling CRDA to update world regulatory domain
[ 30.700000] cfg80211: World regulatory domain updated:
[ 30.710000] cfg80211: DFS Master region: unset
[ 30.710000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.720000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.730000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.730000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 30.750000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 30.760000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 32.260000] usbcore: registered new interface driver rt73usb
[ 32.310000] ath: EEPROM regdomain: 0x0
[ 32.310000] ath: EEPROM indicates default country code should be used
[ 32.310000] ath: doing EEPROM country->regdmn map search
[ 32.310000] ath: country maps to regdmn code: 0x3a
[ 32.310000] ath: Country alpha2 being used: US
[ 32.310000] ath: Regpair used: 0x3a
[ 32.320000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 32.330000] Registered led device: ath9k-phy0
[ 32.330000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 32.330000] cfg80211: Calling CRDA for country: US
[ 32.340000] cfg80211: Regulatory domain changed to country: US
[ 32.340000] cfg80211: DFS Master region: FCC
[ 32.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 32.360000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
[ 32.370000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 32.380000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 32.390000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
[ 32.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
[ 32.400000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 32.690000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 32.700000] ieee80211 phy1: hwaddr 00:13:37:97:05:19, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 32.720000] rtl8187: Customer ID is 0x46
[ 32.720000] Registered led device: rtl8187-phy1::radio
[ 32.720000] Registered led device: rtl8187-phy1::tx
[ 32.720000] Registered led device: rtl8187-phy1::rx
[ 32.730000] rtl8187: wireless switch is on
[ 32.730000] usbcore: registered new interface driver rtl8187
[ 32.820000] Button Hotplug driver version 0.4.1
[ 33.030000] RPC: Registered named UNIX socket transport module.
[ 33.040000] RPC: Registered udp transport module.
[ 33.040000] RPC: Registered tcp transport module.
[ 33.050000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.370000] PPP generic driver version 2.4.2
[ 33.410000] usbcore: registered new interface driver rt2800usb
[ 33.540000] tun: Universal TUN/TAP device driver, 1.6
[ 33.540000] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 33.890000] ip_tables: © 2000-2006 Netfilter Core Team
[ 34.120000] NET: Registered protocol family 24
[ 34.260000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
[ 34.970000] xt_time: kernel timezone is -0000
[ 35.500000] usbcore: registered new interface driver ath9k_htc
[ 35.540000] usbcore: registered new interface driver cdc_acm
[ 35.540000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 35.770000] usbcore: registered new interface driver usbserial
[ 35.770000] USB Serial support registered for generic
[ 35.780000] usbcore: registered new interface driver usbserial_generic
[ 35.780000] usbserial: USB Serial Driver core
[ 35.920000] usbcore: registered new interface driver asix
[ 36.000000] usbcore: registered new interface driver cdc_ether
[ 36.240000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 36.340000] usbcore: registered new interface driver rndis_host
[ 36.450000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.480000] USB Serial support registered for GSM modem (1-port)
[ 36.480000] usbcore: registered new interface driver option
[ 36.490000] option: v0.7.2:USB Driver for GSM modems
[ 36.510000] USB Serial support registered for pl2303
[ 36.510000] usbcore: registered new interface driver pl2303
[ 36.520000] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 46.120000] device eth0 entered promiscuous mode
[ 46.520000] eth0: link up (100Mbps/Full duplex)
[ 46.520000] br-lan: port 1(eth0) entered forwarding state
[ 46.530000] br-lan: port 1(eth0) entered forwarding state
[ 48.530000] br-lan: port 1(eth0) entered forwarding state
[ 51.710000] device wlan0 entered promiscuous mode
[ 51.730000] br-lan: port 2(wlan0) entered forwarding state
[ 51.740000] br-lan: port 2(wlan0) entered forwarding state
[ 53.740000] br-lan: port 2(wlan0) entered forwarding state
[ 430.860000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
[ 430.990000] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
br-lan Link encap:Ethernet HWaddr 00:13:37:A5:32:4F
inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2508 errors:0 dropped:290 overruns:0 frame:0
TX packets:3036 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:384595 (375.5 KiB) TX bytes:2176819 (2.0 MiB)
eth0 Link encap:Ethernet HWaddr 00:13:37:A5:32:4F
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2787 errors:0 dropped:93 overruns:0 frame:0
TX packets:3036 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:462952 (452.1 KiB) TX bytes:2176819 (2.0 MiB)
Interrupt:4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:517 errors:0 dropped:0 overruns:0 frame:0
TX packets:517 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:40861 (39.9 KiB) TX bytes:40861 (39.9 KiB)
wlan0 Link encap:Ethernet HWaddr 00:13:37:A5:32:4F
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:127736 (124.7 KiB)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 003: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 005: ID 106c:3718 Curitel Communications, Inc.
Jan 1 00:14:53 Pineapple daemon.notice pppd[3071]: pppd 2.4.5 started by root, uid 0
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (BUSY)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (NO CARRIER)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (ERROR)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (NO DIAL TONE)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (NO ANSWER)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: abort on (DELAYED)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: report (CONNECT)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: timeout set to 10 seconds
Jan 1 00:14:54 Pineapple local2.info chat[3078]: send (AT^M)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: expect (OK)
Jan 1 00:14:54 Pineapple local2.info chat[3078]: ^M
Jan 1 00:14:54 Pineapple local2.info chat[3078]: OK
Jan 1 00:14:54 Pineapple local2.info chat[3078]: -- got it
Jan 1 00:14:54 Pineapple local2.info chat[3078]: send (ATZ^M)
Jan 1 00:14:55 Pineapple local2.info chat[3078]: timeout set to 30 seconds
Jan 1 00:14:55 Pineapple local2.info chat[3078]: expect (OK)
Jan 1 00:14:55 Pineapple local2.info chat[3078]: ^M
Jan 1 00:14:55 Pineapple local2.info chat[3078]: ^M
Jan 1 00:14:55 Pineapple local2.info chat[3078]: OK
Jan 1 00:14:55 Pineapple local2.info chat[3078]: -- got it
Jan 1 00:14:55 Pineapple local2.info chat[3078]: send (ATDT#777^M)
Jan 1 00:14:55 Pineapple local2.info chat[3078]: expect (CONNECT)
Jan 1 00:14:55 Pineapple local2.info chat[3078]: ^M
Jan 1 00:14:55 Pineapple local2.info chat[3078]: ^M
Jan 1 00:14:55 Pineapple local2.info chat[3078]: ERROR
Jan 1 00:14:55 Pineapple local2.info chat[3078]: -- failed
Jan 1 00:14:55 Pineapple local2.info chat[3078]: Failed (ERROR)
Jan 1 00:14:55 Pineapple daemon.err pppd[3071]: Connect script failed
Jan 1 00:14:56 Pineapple daemon.info pppd[3071]: Exit.
Jan 1 00:14:56 Pineapple daemon.notice netifd: Interface 'wan2' is now down
Link to comment
Share on other sites

Thanks for taking the time to help me out Foxtrot. I was unsuccessful in getting a different response whilst using 8.8.8.8. Also, I installed the kmod-usb-acm 3.3.8-1 package yesterday (thanks Peter D'Hoye) before I posted the question. Sorry for not including that tidbit. I made sure it was up to date today. If anything else creeps into your mind about my tiny debacle let me know. Again Sir, thanks much!

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...