Whistle Master Posted April 28, 2014 Posted April 28, 2014 (edited) Pineapple Stats v1.0 is out Description: Passive WiFi network scanner with web based dashboard. Installation 1. Install infusion on Pineapple 2. Go to Help tab and download pineapplestats.tar.gz 3. Extract the archive on your remote server e.g. https://YOURDOMAIN/pineapplestats/ 4. Use phpMyAdmin to import DB schema pineapplestats.sql 5. Go to https://YOURDOMAIN/pineapplestats/ 6. Enter DB configuration settings and admin user informations. 7. Make sur you can connect to the Dashboard. 8. On the infusion, go to Configuration tab and enter: Remote Server Pineapple Name Pineapple Latitude Pineapple Longitude 9. Test that remote server is OK 10. Click on Add Token and make sure you get response done 11. Save configuration. 12. Install Watchdog. 13. Start Daemon. Edited August 13, 2014 by Whistle Master Quote
TYTechnolust Posted April 28, 2014 Posted April 28, 2014 Wow! Exciting! Thanks! Looking forward to it Whistle Master Quote
thesugarat Posted May 2, 2014 Posted May 2, 2014 As usual top notch work WhistleMaster... Any chance it supports USB GPS unit like kismet? Quote
m40295 Posted May 9, 2014 Posted May 9, 2014 this will be a exciting infusion thanks for the great work whistlemaster cant wait Quote
Whistle Master Posted May 9, 2014 Author Posted May 9, 2014 I have to figure out for the USB GPS... I don't have one actually to test Quote
thesugarat Posted May 10, 2014 Posted May 10, 2014 Well PM me your name/address and Amazon can fix that. :) Quote
m40295 Posted May 22, 2014 Posted May 22, 2014 looks great , will there be a tutorial or video showing install guide? Quote
DrDinosaur Posted May 22, 2014 Posted May 22, 2014 (edited) I *think* this infusion may have led my pineapple to a constant boot loop. You can't do anything. It just cycles a reboot. No web interface or SSH access could really happen before it reboots again. It had to do with adding Watchdog to cron. I'm not sure if this is really the case, but my pineapple was working perfectly before this and since that job was set to run every minute, it may be causing this issue. Edited May 22, 2014 by DrDinosaur Quote
m40295 Posted May 22, 2014 Posted May 22, 2014 (edited) i am stuck at the install php, after entering my info i get to login and wrong login i chmod 777 -R /pineapplestats to be sure it wasent permissions edit after going thru and reinstalling server stuck at same place wrong login ? what am i doing wrong currently using a netbook maby a pi web server later Edited May 22, 2014 by m40295 Quote
xrad Posted May 22, 2014 Posted May 22, 2014 I *think* this infusion may have led my pineapple to a constant boot loop. You can't do anything. It just cycles a reboot. No web interface or SSH access could really happen before it reboots again. It had to do with adding Watchdog to cron. I'm not sure if this is really the case, but my pineapple was working perfectly before this and since that job was set to run every minute, it may be causing this issue. Happened to me, also, I had to unbrick (soft brick) and manual upgrade my mark v twice........I'm not sure what part of the infusion caused it. Having a slight problem with that pineapple anyway, so I didn't post about it. I just thought maybe it was just me. Quote
Whistle Master Posted May 24, 2014 Author Posted May 24, 2014 (edited) Thanks for your feedback ! I have a check in the watchdog to make sure the pineapple has internet access, if not, it will try to restart the pineapple. If your pineapple does not have internet access at the installation of the cron, this may be the problem causing the boot loop. You can disable it in the options. Edited May 24, 2014 by Whistle Master Quote
m40295 Posted May 28, 2014 Posted May 28, 2014 could not get infusion and server to work together and it seems no one else can help waiting for setup instructions maby running locally on the pineapple Quote
raz0r Posted June 10, 2014 Posted June 10, 2014 Yea im playing with it now and its says wrong login for the email but its right. Can someone please help me Regards Raz0r Quote
raz0r Posted June 12, 2014 Posted June 12, 2014 Got it up and running but it keeps rebooting my pineapple. Can someone help me please Regards Raz0r Quote
raz0r Posted June 12, 2014 Posted June 12, 2014 I know most of you here are very happy with setting these infusions up its easy point click go, but nothing really comes with instructions as to get it to work properly, I'm not to bad with the command line as been doing it one or two years but it would be good to see a setup video, as i have run into a few problems setting up one or two, pinneapplestatus was fun then i had to go through sql commands easy when you know how, just took me a bit to get my head round it again, know what ya gonna say how hard is it to create a DB create a user and insert the sql commands and give permissions how hard can it be, the information needs to be stored somewhere!! Not bitching lads just be great to come with some instructions. Keep up the great work chaps. :) Regards Raz0r Quote
ZaraByte Posted June 13, 2014 Posted June 13, 2014 Lol the only thing that has me confused with the new mark 5 is which interface to use when using urlsnif and cookie trap way to many interfaces to choice from but i assume it would have to be like wlan1 i guess some reason it picks the loopback device or br-lan by its self. Quote
raz0r Posted June 13, 2014 Posted June 13, 2014 (edited) Yep got it all up and running created a SQLDB and so on but my pineapple doesn't always show it also doesn't get a GPS fix for some reason. Also it likes to reboot its self not sure why http://tinypic.com/r/6pu7n7/8 Regards Raz0r Edited June 13, 2014 by raz0r Quote
Whistle Master Posted June 17, 2014 Author Posted June 17, 2014 (edited) As already said, I have a check in the watchdog to make sure the pineapple has internet access, if not, it will try to restart the pineapple. If your pineapple does not have internet access at the installation of the cron, this may be the problem causing the boot loop. You can disable it in the options. And, for the moment, there is no support for GPS, you have to setup up your pineapple coordinates yourself in the infusion GUI. Edited June 17, 2014 by Whistle Master Quote
raz0r Posted June 17, 2014 Posted June 17, 2014 Got ya but what about if i am using internet through ICS ?? also i connected to an AP and it keeps doing the same thing !! Regards Raz0r Quote
Whistle Master Posted June 17, 2014 Author Posted June 17, 2014 Try to deactivate the connectivity check in the options. Quote
Whistle Master Posted June 17, 2014 Author Posted June 17, 2014 And, for the moment, there is no support for GPS, you have to setup up your pineapple coordinates yourself in the infusion GUI. Quote
raz0r Posted June 18, 2014 Posted June 18, 2014 I figured that bit buddy when i pressed get location. Many thanks and keep up the good work Regards Raz0r Quote
ZaraByte Posted August 10, 2014 Posted August 10, 2014 Download for the pineapplestats.tar when clicked on opens the tar ball up showing jibberish i think you might have left out target="_blank"> in the code for that download or something else is up. I'll have to do a video showing people how to download it from WinSCP till you fix this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.