Jump to content

[Release] 1.3.0 - Codename: Salmonosaurus

Sebkinne

By Sebkinne
in WiFi Pineapple Mark V

 Share

Recommended Posts

Sebkinne Grand Master

Sebkinne

Posted
Posted

Hey everyone,

After a week of beta testing, we are happy to announce our WiFi Pineapple MKV firmware version 1.3.0. This release focused on updating our base with upstream changes and further improving the WiFi Pineapple MKV's general stability. We spent some time improving the way that karma does it's logging and the overall stability of the wireless interfaces.

We would also like to thank all our beta testers which wrote a report to let us know their thoughts and any positive or negative things they noticed. Your feedback helps us improve the WiFi Pineapple immensely! If you wanted to try out the beta but didn't get a chance to, don't worry, we are constantly working on new things and will be releasing beta firmwares more regularly! Also, if you have participated in the beta, make sure to re-flash the released 1.3.0 firmware as there have been changes after the last beta round.

Changelog:

  • Merged upstream changes
    • Updated wireless drivers.
    • Updated wireless utilities.
    • Updated OpenSSL (fixed heartbleed).
    • Updated some other base components.
    • Updated hostapd.
  • Improved WiFI Stability
    • More stable AP.
    • More stable clientmode.
  • Karma
    • Faster response times.
    • Cleaner, more concise log output.
    • Timestamps added to log.
    • Much faster webinterface view of the log.
  • Removed the need to re-boot after the initial setup (first boot).
  • Added proper vFat support.
  • Updated all system infusions to their latest versions.
  • Security fixes
  • Other minor fixes and improvements.
Download: Over the air through the web-interface. (alternatively at https://wifipineapple.com?downloads)
MD5: 87eeab7e7f3543cd4c3eebdb07711d20
Note: To flash this over the web-interface, please make sure your info tile is at it's latest version.
As usual, please leave any feedback in this thread.
Bugs, suggestions can also (and should be) be left here.
We hope you enjoy this release!
-The WiFi Pineapple Team
WxB1K4Z.png
Link to comment
Share on other sites
C3PBRO Newbie

C3PBRO

Posted
Posted (edited)

Woohoo thanks for this guys. Your work has been tremendous, and the project is moving along at such a fast, exciting rate. Keep it up sebbie, dazza and the rest of the team. Lovin it

Edited by C3PBRO
Link to comment
Share on other sites
Hits_s Newbie

Hits_s

Posted
Posted (edited)

Thanks :) Downloading ...

But I'm having problems with the upgrade, can not get it to start again pineapple, I having to load the factory image and try to retrieve it again but when you install the new firmware (1.3.0) does not start the pineapple.

Has anyone had similar problems?
Keep the work :D

Edited by Hits_s
Link to comment
Share on other sites
svondutch Newbie

svondutch

Posted
Posted (edited)

I had tucked the SD card away because it didn't work for me and I had to initialize my MK5 using the unbrick instructions. Anyway, can I format this thing via the management interface now? (it reads: "experimental" which kinda scares me)

Edited by svondutch
Link to comment
Share on other sites
Sebkinne Grand Master

Sebkinne

Posted
  • Author
Posted

I had tucked the SD card away because it didn't work for me and I had to initialize my MK5 using the unbrick instructions. Anyway, can I format this thing via the management interface now? (it reads: "experimental" which kinda scares me)

The reason you were getting the blinking blue light (booting) was because it tried to boot but because no SD card was inserted, it failed. It doesn't matter if it is formatted or not, as long as one is inserted. You can re-format the SD card just like you can before through the webinterface. The reason why it says experimental is because it fails sometimes. Then you'll need to re-boot and try again. If your SD card is toast though (some of he SD cards we shipped out are defective), you'll need to replace it with a new one if you want to use the SD card storage. I recommend any size class 10 SD card. Again, this is only if the card is permanently dead. A re-format should work.

Either way, you have successfully flashed 1.3.0!

So far, so good.

The "hostapd deauth" issue I have experienced since 1.0.0 seems to have been fixed.

No rebooting every 30 minutes..........yay

Thanks Sebkinne

I'm glad the issue is fixed!

Best Regards,

Sebkinne

Link to comment
Share on other sites
SamRyan Newbie

SamRyan

Posted
Posted

Since I got my Pineapple I have been having some issues with the wireless radio, namely no wifi signal is being transmitted for clients to connect. I was hopping the new firmware would fix this but now I'm wondering if it's a hardware problem.

Thanks.

Link to comment
Share on other sites
HexAssembler Newbie

HexAssembler

Posted
Posted

Thanks for the continuous update. The Karma is working good right now but I have some problems when I have a lot host connected to the pineapple

Link to comment
Share on other sites
0jf5 Newbie

0jf5

Posted
Posted (edited) 
Jan  1 02:01:05 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: authenticated
Jan  1 02:01:05 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: associated (aid 2)
Jan  1 02:03:39 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: authenticated
Jan  1 02:03:39 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: associated (aid 3)
Jan  1 02:33:26 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: disassociated due to inactivity
Jan  1 02:33:27 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Jan  1 02:33:35 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: disassociated due to inactivity
Jan  1 02:33:37 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Jan  1 04:51:21 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: authenticated
Jan  1 04:51:21 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: associated (aid 2)
Jan  1 04:51:56 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: authenticated
Jan  1 04:51:56 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: associated (aid 3)
Jan  1 05:17:50 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: authenticated
Jan  1 05:17:50 Pineapple daemon.info hostapd: wlan0: STA 00:90:4b:58:5d:0d IEEE 802.11: associated (aid 3)
Jan  1 05:58:43 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: disassociated due to inactivity
Jan  1 05:58:44 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Jan  1 15:02:39 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: authenticated
Jan  1 15:02:39 Pineapple daemon.info hostapd: wlan0: STA d8:b3:77:f1:85:30 IEEE 802.11: associated (aid 2)

also this issue is back https://forums.hak5.org/index.php?/topic/31120-unstable-tx-power-on-ar9331/#entry234207

Also not sure why my bug report on ntpd not starting was closed. Testing it on 2 devices out of X may not be the best sample size if there's an issue.

It appears literally nothing has improved on my end regardless of firmware updates from 1.0-1.3 and the replacement pineapple.

Please direct me on the proper channel to get a refund.

Thanks

Edited by 0jf5
Link to comment
Share on other sites
Crypiehef Newbie

Crypiehef

Posted
Posted

Thanks :) Downloading ...

But I'm having problems with the upgrade, can not get it to start again pineapple, I having to load the factory image and try to retrieve it again but when you install the new firmware (1.3.0) does not start the pineapple.

Has anyone had similar problems?

Keep the work :D

I had a problem too but it was my fault for upgrading from the beta... I did the factory image as well, rebooted.. Applied the update.. After about 5 minutes the lights were flashing like a police car.. I was able to connect to the pineapple and set the password, hit continue and it was fine.

Thanks for the continuous update. The Karma is working good right now but I have some problems when I have a lot host connected to the pineapple

What do you mean by a lot? I can handle about 10 or so on my 4G (80Mbps) connection before they get lag and SSL strip and URL snarf etc.. starts to act wonky. Solution.. Tango mode. Get a few more pineapples and set them up to mesh.. adjust the txpower to your pentest accordingly on each one.

Wicked Pissa to the whole team (I'm from Boston, don't judge). Anyway.. Super stable. Love the SDR stuff! So easy to use! Epic! Karma working great, infusions working great. I have nothing to to report that's negative. I actually had very little problems with the beta too. Love the improvements the the way this is headed!
Seb, Darren, etc.. frickin hackerific!
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...