Carloscastenada Posted March 22, 2014 Posted March 22, 2014 I have uninstalled and re-installed WPS from Pineapple Bar just to be sure. @Sebkinne Thanks for the reply. Here are the steps to what I do on Pineapple Mark V to try and get Reaver working. While connected to MarkV via wifi (on wlan0 adapter on MarkV) I browse to Web server and log in. Go to WPS - v1.0 "Menu" Wlan interface - I select wlan1 , then Start, then start Monitor Monitor interface - mon0 reaver - installed bully - installed Select AP In General tab below, make sure info is populated. Monitor interface: mon0 (what ever it becomes, same as top interface selection) Then select [start] Output - WPS is running... _________________________________________________________________________ Update: The Output tab seems to work correctly when / if I delete all logs in History tab. Might be a bug to check into.. Thanks Thanks for the detailed operating instructions: it really helps !!! As for the displayed text: "WPS is running..." cool. I think a little more feedback to the screen would be helpful like displaying this with a time stamp once every ten seconds. Otherwise I'd love to see the actual successful output screen. Thank you to Hak5 Ninja and all the time spent on this app. It would be great to see it working. Quote
thesugarat Posted March 22, 2014 Posted March 22, 2014 Carloscastenada, No idea what you're talking about. WPS works fine... Quote
Carloscastenada Posted March 22, 2014 Posted March 22, 2014 Carloscastenada, No idea what you're talking about. WPS works fine... I believe you. I have not seen the output screen upon a successful crack is all, nor any progress updates in the window. Thanks for the contact, I appreciate it. Normally I see progress reports in Kali for password cracking. If all I see is "WPS is working..." does that mean it is working and not providing screen updates? Should WPS be displaying screen updates ? When I hit refresh the screen shows that it stopped working, very confusing, why do we even need a refresh? Any chance of getting the full source code? Thanks again for great work you are doing at Hak5, Sebkinne, WhistleBlower, all of you that have worked on WPS. I love the pineapple. Quote
thesugarat Posted March 22, 2014 Posted March 22, 2014 I posted above in #41 about there being a proper order to to do things in order for it to work correctly in the Infusion.... If you aren't seeing updates or after a refresh it's stopped, odds are you've just got some tweaking to do in how you go about setting it up. Before you use the infusion I suggest you ssh into the pineapple and use reaver from the command line. You'll see that it works exactly the same way as in Kali, the only difference for me personally is with Kali I go in and kill any of the suggested PIDs that turning on monitor mode suggests. I don't do that on the pineapple as there are other things going on in the background that I'm not comfortable stopping. Quote
Carloscastenada Posted March 22, 2014 Posted March 22, 2014 Excellent post and reply Sugarat. Thank you for the great help. Your answer provided the answers that I needed to get it going. Best! Carlos Quote
raz0r Posted March 25, 2014 Posted March 25, 2014 (edited) Also noticed when it cracks an AP it does not stay there on the screen even though the refresh is set to 1 sec. so you need to check the log !! what should happen is that it stays on the screen surley like it does on Kali ?? Also found two AP's stuck with Reaver @ 99.99% BtHub4-XXXX can anyone help here i havent dectected a lockout Regards Raz0r Edited March 25, 2014 by raz0r Quote
thesugarat Posted March 25, 2014 Posted March 25, 2014 It goes away when it's done cracking Because you have the auto refresh turned on. This isn't command line so its just going to do that. Even if you had auto off, and it finished and you hit refresh, it's just going to tell you WPS is not running. And you'll have to go to the log anyway. Quote
mreidiv Posted March 26, 2014 Posted March 26, 2014 I have uninstalled and re-installed WPS from Pineapple Bar just to be sure. @Sebkinne Thanks for the reply. Here are the steps to what I do on Pineapple Mark V to try and get Reaver working. While connected to MarkV via wifi (on wlan0 adapter on MarkV) I browse to Web server and log in. Go to WPS - v1.0 "Menu" Wlan interface - I select wlan1 , then Start, then start Monitor Monitor interface - mon0 reaver - installed bully - installed Select AP In General tab below, make sure info is populated. Monitor interface: mon0 (what ever it becomes, same as top interface selection) Then select [start] Output - WPS is running... _________________________________________________________________________ Update: The Output tab seems to work correctly when / if I delete all logs in History tab. Might be a bug to check into.. Thanks I have had this same issue. Quote
pininn Posted March 28, 2014 Posted March 28, 2014 Hello,i have a mark 5 with The latest firmware.when i install The wps infusion,i have no eerrors about The md5 but after The confirmation of installation i can read that reaver is not installed.did it happen to someone else?how to procees?thank you Quote
Sebkinne Posted March 28, 2014 Posted March 28, 2014 Hello,i have a mark 5 with The latest firmware.when i install The wps infusion,i have no eerrors about The md5 but after The confirmation of installation i can read that reaver is not installed.did it happen to someone else?how to procees?thank you This is normal. You will need to open the large tile and install the dependencies that way. Edit: As our website is currently down, the package repository is too. Please bear with us while we get this sorted out. Best Regards, Sebkinne Quote
pininn Posted March 28, 2014 Posted March 28, 2014 Thank you.what you mean with large tile?and sure i Will wait The website up again.thank you Quote
Sebkinne Posted March 28, 2014 Posted March 28, 2014 Thank you.what you mean with large tile?and sure i Will wait The website up again.thank you The WPS large tile, when you click on the title of the wps infusion, a bigger window should pop up. There you should be able to install reaver. But this will fail as our site is currently down. Quote
pininn Posted March 29, 2014 Posted March 29, 2014 Ok,The website is up.today i tried but The only thing i can click is install,not The name of The infusion,so i have no way sto open the tile Quote
Whistle Master Posted March 30, 2014 Author Posted March 30, 2014 version 1.1 is available, with new display for interfaces and monitor and automatic deactivation of wlanX before starting bully or reaver, and reactivation after stopping bully or reaver. Quote
dustbyter Posted March 30, 2014 Posted March 30, 2014 Sweet WM! I'll be excited to check it out! I really couldn't get the other version to do anything :) Quote
Boosted240 Posted March 30, 2014 Posted March 30, 2014 I've been silently following this thread, I'm excited to try the changes. Sadly I'm headed to a wedding. I just dusted off/reflashed/updated my Rassple Pie last night and was playing with this infusion again. Quote
thesugarat Posted March 30, 2014 Posted March 30, 2014 Either there's something going on or I'm doing something wrong... The new version keeps shutting off my wlan0. It happens with either reaver or bully. I've tried the old steps and I tried just enabling the wlan1 interface and hitting Start Monitor, then choosing an AP then hitting start. Either way within 30 secs while it still says loading my Pineapple lights go down to just the green one. So no wlan0... When I go and unplug and come back the setting for whatever network I was trying to bully/reaver are still on the mini tile. Again, it happens with either reaver or bully. I also formatted my SD card and reflashed the pineapple just to make sure it wasn't some funky upgrade garbage but it still happens. Quote
raz0r Posted March 31, 2014 Posted March 31, 2014 thesugarat i totally agree fella i have the same problem i found before that i could stop wlan1 and still have access to my pinapple without haveing to use the ethernet net cable please can you change this Whistlemaster so wlan0 doesnt switch offMany thanks Raz0r Quote
raz0r Posted March 31, 2014 Posted March 31, 2014 @ dustbyterScan with wlan1 after you see YOUR ROUTER DISPLAYED click stop then start monitor. Chose Reaver or Bully and chose the monitor bit in the settings Then make sure -vv with reaver is running or -v 3 with bully Then keep auto refresh on at 1 sec then you can see whats happening Regards Raz0r Quote
raz0r Posted April 1, 2014 Posted April 1, 2014 Please tell me how to get the old version of WPS !! Regards Raz0r Quote
thesugarat Posted April 1, 2014 Posted April 1, 2014 Just use it from command line. That will still work. Quote
raz0r Posted April 1, 2014 Posted April 1, 2014 Is there any way to get the old version back ?? Quote
thesugarat Posted April 1, 2014 Posted April 1, 2014 I doubt it. Unless they put the old one back into the pineapple bar you can only get the new one. But again it's only the interface that has changed. The version of reaver and bully under the hood are still the same. So they should still work as expected after using ssh. Quote
Sebkinne Posted April 1, 2014 Posted April 1, 2014 If there is an issue, Whistle Master will fix it soon, I'm sure. Best regards, Sebkinne Quote
raz0r Posted April 1, 2014 Posted April 1, 2014 They still work ok its just the fact it shuts wlan0 down to so the only way i can get back into it is if i use the cable thats no good to me cos i cant connect to it wirelessley :( Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.