Swap configuration

[Nextria]

Hello,

I have my pineapple for a couple of weeks now, and its working great.

Only i have a question.

When i got it i installed the firmware as stated in the manual,

After it rebooted and everything worked, I formated the SD-Card true the interface.

on the resource tile it shows it has swap but it is not being used:

             total         used         free       shared      buffersMem:         61804        47532        14272            0         6524-/+ buffers:              41008        20796Swap:      1002256            0      1002256

this is my Fstab:

config global automount
       option from_fstab 1
       option anon_mount 1

config global autoswap
       option from_fstab 1
       option anon_swap 0

config mount
       option target   /sd
       option device   /dev/sdcard/sd1
       option fstype   auto
       option options  rw,sync
       option enabled  1
       option enabled_fsck 0

config swap
       option device   /dev/sdcard/sd2
       option enabled  1

and Current Disk Usage:

Filesystem                Size      Used Available Use% Mounted onrootfs                    4.1M      1.3M      2.8M  31% //dev/root                11.0M     11.0M         0 100% /romtmpfs                    30.2M    140.0K     30.0M   0% /tmptmpfs                   512.0K         0    512.0K   0% /dev/dev/mtdblock3            4.1M      1.3M      2.8M  31% /overlayoverlayfs:/overlay        4.1M      1.3M      2.8M  31% //dev/sdcard/sd1         817.7M     27.7M    749.0M   4% /sd

am i overlooking something?

Nextria

Edited December 31, 2013 by Nextria