Jump to content

Clean flash without LAN cable


Recommended Posts

For some reason, I can't connect to the pineapple use PoE/LAN....

When I check the details of the connection (through Windows network center), it shows thousands of send packages, but absolutely 0 received packages! It does nothing, so no IP assigments, no data about the standard gateway, nothing...

Is it possible to flash the pineapple without the tftp?

ar7240> setenv bootargs "board=ALFA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd"
ar7240> saveenv
Saving Environment to Flash...
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1
First 0x4 last 0x4 sector size 0x10000 4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
ar7240> tftp 0x80600000 kernel.bin
eth0 link down
FAIL
eth1 link down
FAIL
Using eth0 device
TFTP from server 192.168.2.100; our IP address is 192.168.2.1
Filename 'kernel.bin'.
Load address: 0x80600000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
eth1 link down
FAIL
eth0 link down
FAIL
Using eth1 device
TFTP from server 192.168.2.100; our IP address is 192.168.2.1
Filename 'kernel.bin'.
Load address: 0x80600000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
eth0 link down
FAIL
eth1 link down
FAIL
Edited by janekong
Link to post
Share on other sites

No I'm pretty sure you need to use tftp.. Well first on your windows pc make sure you have no 3rd party antivirus or malware protection on, If it is then disable it. After that make sure you have the windows firewall OFF or disabled. You will not be able to transfer anything if you still have firewalls enabled.

Link to post
Share on other sites

Which part of the pineapple does not send a single packet don't you understand?

No I'm pretty sure you need to use tftp.. Well first on your windows pc make sure you have no 3rd party antivirus or malware protection on, If it is then disable it. After that make sure you have the windows firewall OFF or disabled. You will not be able to transfer anything if you still have firewalls enabled.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...