Jump to content

USB mounting


dazrox88
 Share

Recommended Posts

I'm having a problem mounting my usb card, I followed this guide and still not working http://forums.hak5.org/index.php?/topic/25882-how-to-enable-usb-mass-storage-with-swap-partition/

It does not look like it's not seeing the drive.

Thanks in advance

18:10:04 Pineapple kern.info kernel: [ 840.460000] usb 1-1: new full-speed USB device number 3 using ehci-platform
18:10:04 Pineapple kern.err kernel: [ 840.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
18:09:57 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
18:08:46 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
18:06:43 Pineapple authpriv.notice dropbear[2328]: Password auth succeeded for 'root' from 172.16.42.42:51362
18:06:33 Pineapple authpriv.info dropbear[2328]: Child connection from 172.16.42.42:51362
18:04:42 Pineapple kern.info kernel: [ 518.630000] device wlan0 left promiscuous mode
18:04:42 Pineapple kern.info kernel: [ 518.630000] br-lan: port 2(wlan0) entered disabled state
18:04:42 Pineapple kern.info kernel: [ 518.610000] br-lan: port 2(wlan0) entered disabled state
18:04:33 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
18:03:02 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
18:01:42 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
18:00:40 Pineapple kern.info kernel: [ 276.030000] usb 1-1: new full-speed USB device number 2 using ehci-platform
18:00:40 Pineapple kern.err kernel: [ 276.190000] hub 1-0:1.0: unable to enumerate USB device on port 1
18:00:08 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
17:58:06 Pineapple daemon.warn dnsmasq-dhcp[1475]: no address range available for DHCP request via eth1
17:58:05 Pineapple cron.err crond[1408]: time disparity of 22912917 minutes detected
00:01:32 Pineapple user.info sysinit: setting up led WLAN
00:01:32 Pineapple user.info sysinit: setting up led WAN
00:01:32 Pineapple user.info sysinit: setting up led USB
00:01:32 Pineapple user.info sysinit: setting up led LAN
00:01:30 Pineapple kern.info kernel: [ 90.500000] br-lan: port 2(wlan0) entered forwarding state
00:01:28 Pineapple kern.info kernel: [ 88.500000] br-lan: port 2(wlan0) entered forwarding state
00:01:28 Pineapple kern.info kernel: [ 88.500000] br-lan: port 2(wlan0) entered forwarding state
00:01:28 Pineapple kern.info kernel: [ 88.360000] device wlan0 entered promiscuous mode
00:01:25 Pineapple kern.info kernel: [ 85.830000] device wlan0 left promiscuous mode
00:01:25 Pineapple kern.info kernel: [ 85.830000] br-lan: port 2(wlan0) entered disabled state
00:01:24 Pineapple user.info sysinit: cp: omitting directory '/etc/config/backup'
00:01:22 Pineapple kern.info kernel: [ 82.640000] br-lan: port 2(wlan0) entered forwarding state
00:01:21 Pineapple user.notice ifup: Allowing Router Advertisements on wan (eth1)
00:01:20 Pineapple kern.info kernel: [ 80.640000] br-lan: port 2(wlan0) entered forwarding state
00:01:20 Pineapple kern.info kernel: [ 80.630000] br-lan: port 2(wlan0) entered forwarding state
00:01:20 Pineapple kern.info kernel: [ 80.580000] device wlan0 entered promiscuous mode
00:01:18 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo)
00:01:18 Pineapple authpriv.info dropbear[1793]: Running in background
00:01:16 Pineapple daemon.notice netifd: Interface 'wan' is now up
00:01:16 Pineapple daemon.info dnsmasq[1475]: using nameserver 8.8.8.8#53
00:01:16 Pineapple daemon.info dnsmasq[1475]: using local addresses only for domain lan
00:01:16 Pineapple daemon.info dnsmasq[1475]: reading /tmp/resolv.conf.auto
00:01:15 Pineapple kern.info kernel: [ 75.100000] br-lan: port 1(eth0) entered forwarding state
00:01:15 Pineapple daemon.notice netifd: wan (1633): Sending select for 192.168.1.155...
00:01:15 Pineapple daemon.notice netifd: wan (1633): Sending discover...
00:01:15 Pineapple daemon.notice netifd: wan (1633): Lease of 192.168.1.155 obtained, lease time 86400
00:01:14 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan)
00:01:13 Pineapple kern.info kernel: [ 73.400000] eth1: link up (100Mbps/Full duplex)
00:01:13 Pineapple kern.info kernel: [ 73.100000] eth0: link up (1000Mbps/Full duplex)
00:01:13 Pineapple kern.info kernel: [ 73.100000] br-lan: port 1(eth0) entered forwarding state
00:01:13 Pineapple kern.info kernel: [ 73.100000] br-lan: port 1(eth0) entered forwarding state
00:01:12 Pineapple kern.info kernel: [ 72.000000] device eth0 entered promiscuous mode
00:01:12 Pineapple daemon.notice netifd: wan (1633): udhcpc (v1.19.4) started
00:01:12 Pineapple daemon.notice netifd: wan (1633): Sending discover...
00:01:12 Pineapple daemon.notice netifd: Interface 'loopback' is now up
00:01:11 Pineapple daemon.warn dnsmasq[1475]: no servers found in /tmp/resolv.conf.auto, will retry
00:01:11 Pineapple daemon.notice netifd: Interface 'lan' is now up
00:01:10 Pineapple kern.info kernel: [ 70.970000] eth0: link down
00:01:10 Pineapple kern.info kernel: [ 70.110000] eth0: link up (1000Mbps/Full duplex)
00:01:06 Pineapple kern.info kernel: [ 66.450000] eth1: link down
00:01:06 Pineapple daemon.notice netifd: wan (973): Received SIGTERM
00:01:06 Pineapple daemon.notice netifd: Interface 'wan' is now down
00:01:06 Pineapple daemon.notice netifd: Interface 'loopback' is now down
00:01:05 Pineapple kern.info kernel: [ 65.940000] eth0: link down
00:01:05 Pineapple kern.info kernel: [ 65.940000] device eth0 left promiscuous mode
00:01:05 Pineapple kern.info kernel: [ 65.940000] br-lan: port 1(eth0) entered disabled state
00:01:05 Pineapple kern.info kernel: [ 65.900000] br-lan: port 1(eth0) entered disabled state
00:01:05 Pineapple daemon.notice netifd: Interface 'lan' is now down
00:01:04 Pineapple user.info autossh[1057]: received signal to exit (15)
00:01:03 Pineapple daemon.info dnsmasq[1475]: using nameserver 8.8.8.8#53
00:01:03 Pineapple daemon.info dnsmasq[1475]: using nameserver 192.168.1.1#53
00:01:03 Pineapple daemon.info dnsmasq[1475]: using local addresses only for domain lan
00:01:03 Pineapple daemon.info dnsmasq[1475]: using local addresses only for domain lan
00:01:03 Pineapple daemon.info dnsmasq[1475]: started, version 2.62 cachesize 150
00:01:03 Pineapple daemon.info dnsmasq[1475]: reading /tmp/resolv.conf.auto
00:01:03 Pineapple daemon.info dnsmasq[1475]: read /etc/hosts - 1 addresses
00:01:03 Pineapple daemon.info dnsmasq[1475]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
00:01:03 Pineapple daemon.info dnsmasq-dhcp[1475]: read /etc/ethers - 0 addresses
00:01:03 Pineapple daemon.info dnsmasq-dhcp[1475]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
00:00:59 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
00:00:59 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
00:00:55 Pineapple user.info sysinit: wpa_supplicant_setup_vif(wlan0): Refusing to bridge sta mode interface
00:00:55 Pineapple user.info sysinit: enable_mac80211(radio0): Failed to set up wpa_supplicant for interface wlan0
00:00:55 Pineapple cron.info crond[1408]: crond: crond (busybox 1.19.4) started, log level 5
00:00:54 Pineapple user.notice ifup: Allowing Router Advertisements on wan (eth1)
00:00:53 Pineapple user.info sysinit: command failed: Device or resource busy (-16)
00:00:51 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo)
00:00:51 Pineapple daemon.notice netifd: Interface 'wan' is now up
00:00:50 Pineapple daemon.notice netifd: wan (973): Sending select for 192.168.1.155...
00:00:50 Pineapple daemon.notice netifd: wan (973): Sending discover...
00:00:50 Pineapple daemon.notice netifd: wan (973): Lease of 192.168.1.155 obtained, lease time 86400
00:00:49 Pineapple user.info autossh[1057]: starting ssh (count 1)
00:00:49 Pineapple user.info autossh[1057]: ssh child pid is 1059
00:00:49 Pineapple kern.info kernel: [ 49.900000] br-lan: port 1(eth0) entered forwarding state
00:00:49 Pineapple kern.info kernel: [ 49.400000] eth1: link up (100Mbps/Full duplex)
00:00:48 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan)
00:00:47 Pineapple kern.info kernel: [ 47.900000] eth0: link up (1000Mbps/Full duplex)
00:00:47 Pineapple kern.info kernel: [ 47.900000] br-lan: port 1(eth0) entered forwarding state
00:00:47 Pineapple kern.info kernel: [ 47.900000] br-lan: port 1(eth0) entered forwarding state
00:00:47 Pineapple kern.info kernel: [ 47.130000] device eth0 entered promiscuous mode
00:00:47 Pineapple daemon.notice netifd: wan (973): udhcpc (v1.19.4) started
00:00:47 Pineapple daemon.notice netifd: wan (973): Sending discover...
00:00:47 Pineapple daemon.notice netifd: Interface 'loopback' is now up
00:00:47 Pineapple daemon.notice netifd: Interface 'lan' is now up
00:00:45 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
00:00:42 Pineapple kern.info kernel: [ 39.880000] usbserial: USB Serial Driver core
00:00:42 Pineapple kern.info kernel: [ 39.870000] usbcore: registered new interface driver usbserial_generic
00:00:42 Pineapple kern.info kernel: [ 39.870000] USB Serial support registered for generic
00:00:42 Pineapple kern.info kernel: [ 39.860000] usbcore: registered new interface driver usbserial
00:00:42 Pineapple kern.info kernel: [ 39.640000] usbcore: registered new interface driver ath9k_htc
00:00:42 Pineapple kern.info kernel: [ 39.150000] xt_time: kernel timezone is -0000
00:00:42 Pineapple kern.info kernel: [ 38.470000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
00:00:42 Pineapple kern.info kernel: [ 38.330000] NET: Registered protocol family 24
00:00:42 Pineapple kern.info kernel: [ 38.100000] ip_tables: (C) 2000-2006 Netfilter Core Team
00:00:42 Pineapple kern.info kernel: [ 37.850000] tun: Universal TUN/TAP device driver, 1.6
00:00:42 Pineapple kern.info kernel: [ 37.850000] tun: (C) 1999-2004 Max Krasnyansky 
00:00:42 Pineapple kern.info kernel: [ 37.700000] PPP generic driver version 2.4.2
00:00:42 Pineapple kern.info kernel: [ 37.350000] RPC: Registered tcp NFSv4.1 backchannel transport module.
00:00:42 Pineapple kern.info kernel: [ 37.340000] RPC: Registered udp transport module.
00:00:42 Pineapple kern.info kernel: [ 37.340000] RPC: Registered tcp transport module.
00:00:42 Pineapple kern.info kernel: [ 37.330000] RPC: Registered named UNIX socket transport module.
00:00:42 Pineapple kern.info kernel: [ 37.080000] Button Hotplug driver version 0.4.1
00:00:42 Pineapple kern.info kernel: [ 37.020000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
00:00:42 Pineapple kern.info kernel: [ 37.020000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 37.010000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 37.000000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 36.990000] cfg80211: Regulatory domain changed to country: GB
00:00:42 Pineapple kern.info kernel: [ 36.990000] cfg80211: Calling CRDA for country: GB
00:00:42 Pineapple kern.info kernel: [ 36.990000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:42 Pineapple kern.info kernel: [ 36.960000] usbcore: registered new interface driver rt2800usb
00:00:42 Pineapple kern.info kernel: [ 36.930000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
00:00:42 Pineapple kern.info kernel: [ 36.880000] usbcore: registered new interface driver rtl8187
00:00:42 Pineapple kern.info kernel: [ 36.730000] usbcore: registered new interface driver rt73usb
00:00:42 Pineapple kern.info kernel: [ 35.390000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 35.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 35.380000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 35.370000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 35.360000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:42 Pineapple kern.info kernel: [ 35.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:42 Pineapple kern.info kernel: [ 35.350000] cfg80211: World regulatory domain updated:
00:00:42 Pineapple kern.info kernel: [ 35.350000] cfg80211: Calling CRDA to update world regulatory domain
00:00:42 Pineapple kern.info kernel: [ 35.240000] compat.git: wireless-testing.git
00:00:42 Pineapple kern.info kernel: [ 35.230000] Backport based on wireless-testing.git master-2013-02-22
00:00:42 Pineapple kern.info kernel: [ 35.220000] Compat-drivers backport release: compat-drivers-2013-01-21-1
00:00:42 Pineapple kern.info kernel: [ 34.280000] eth0: link down
00:00:42 Pineapple kern.info kernel: [ 13.710000] USB Mass Storage support registered.
00:00:42 Pineapple kern.info kernel: [ 13.700000] usbcore: registered new interface driver usb-storage
00:00:42 Pineapple kern.info kernel: [ 13.700000] Initializing USB Mass Storage driver...
00:00:42 Pineapple kern.info kernel: [ 0.590000] TCP reno registered
00:00:42 Pineapple kern.info kernel: [ 0.580000] TCP: Hash tables configured (established 1024 bind 1024)
00:00:42 Pineapple kern.info kernel: [ 0.570000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
00:00:42 Pineapple kern.info kernel: [ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
00:00:42 Pineapple kern.info kernel: [ 0.570000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
00:00:42 Pineapple kern.info kernel: [ 0.560000] Switching to clocksource MIPS
00:00:42 Pineapple kern.info kernel: [ 0.560000] NET: Registered protocol family 2
00:00:42 Pineapple kern.info kernel: [ 0.550000] bio: create slab at 0
00:00:42 Pineapple kern.info kernel: [ 0.100000] MIPS: machine is ALFA NETWORKS Hornet-UB
00:00:42 Pineapple kern.debug kernel: [ 36.930000] Registered led device: ath9k-phy0
00:00:42 Pineapple kern.debug kernel: [ 36.920000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: doing EEPROM country->regdmn map search
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: country maps to regdmn code: 0x37
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: Regpair used: 0x37
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: EEPROM regdomain: 0x833a
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: EEPROM indicates we should expect a country code
00:00:42 Pineapple kern.debug kernel: [ 36.910000] ath: Country alpha2 being used: GB

post-44583-0-25445600-1374779412_thumb.p

Edited by Mr-Protocol
Spoiler Tags - Holy crap these code windows are hard to get out of.
Link to comment
Share on other sites

Guest Deleted_Account

I have the exact same issue. It shows fine on my Linux boxes (opensuse & ubuntu) as an Ext4 partition. The pineapple doesn't recognized it at all - no LED indicator on the flashdrive or pineapple. I think the pineapple may be faulty but it was working before updating to 2.8.1. I am getting another one in to test and will report back findings.

Link to comment
Share on other sites

Run this command

lsusb

and post the result.

edit: Never mind I didn't realise it was showing at the bottom of your screenshot. I can confirm that the pineapple is not seeing the usb drive at all.

Edited by computerchris
Link to comment
Share on other sites

Guest Deleted_Account

USB stick model and size please.

Not sure what the OP is using but my experience is the "official" usb drive the hakshop shipped.

Link to comment
Share on other sites

Not sure what the OP is using but my experience is the "official" usb drive the hakshop shipped.

Others have reported this one (sandisk cruzer fit) will not work off 5v going in to the pineapple. What are you using for a power source?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...