Jump to content

Mk2 flashed with Mk3 package install problem


Recommended Posts

Attached is the boot information obtained from Serial of which I assume is wifi Pineapple mk2. (pic below)

My question is if all basic components like firmware etc is the latest I could flash or if there is something newer.

I changed it's ip address from 172.16.42.1 to 192.168.1.110 in order to connect it to my default gateway.

My pineapple has access to the internet as I tried ping google.com with success.

I am trying to update my packages with opkg update but the link seems to be down.

root@Pineapple:~# opkg update
Package opkg version 4564-3.1 has no valid architecture, ignoring.
Downloading http://downloads.openwrt.org/snapshots/trunk/atheros/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/barrier_breaker.
Downloading http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz.
Collected errors:
 * opkg_download: Failed to download http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz, wget returned 4.

How can I fix this ? Is there any other way?

I cannot install any jasager version, madwifi, kmod etc..

root@Pineapple:~# opkg install jasager_2.1-1_mips.ipk
Package opkg version 4564-3.1 has no valid architecture, ignoring.
Unknown package 'jasager'.
Collected errors:
 * pkg_hash_fetch_best_installation_candidate: Packages for jasager found, but incompatible with the architectures configured
 * opkg_install_cmd: Cannot install package jasager.

I aprecciate if you can point me to recommended jasager and webif versions..

thanks

+PHY ID is 0022:5521
Ethernet eth0: MAC address 00:12:cf:a4:90:50
IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.4 - built 19:22:52, Oct 15 2007

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap51 
RAM: 0x80000000-0x82000000, [0x8003eaf0-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x802a73e0
RedBoot> exec
Now booting linux kernel:
 Base address 0x80030000 Entry 0x80041000
 Cmdline : 
[    0.000000] Linux version 2.6.37.6 (sebkinne@WorkstationMeltdown) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #4 Sat Jan 28 03:52:49 CET 2012
[    0.000000] ar2315-gpio: registered 22 GPIOs
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019064 (MIPS 4KEc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS0,9600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Memory: 29616k/32768k available (1993k kernel code, 3152k reserved, 311k data, 152k init, 0k highmem)
[    0.000000] NR_IRQS:128
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.000000] console [ttyS0] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 183.50 BogoMIPS (lpj=917504)
[    0.260000] pid_max: default: 32768 minimum: 301
[    0.270000] Mount-cache hash table entries: 512
[    0.290000] NET: Registered protocol family 16
[    0.970000] bio: create slab <bio-0> at 0
[    0.990000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000)
[    1.000000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000)
[    1.010000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff]
[    1.020000] pci 0000:00:00.0: BAR 2: set to [mem 0x80800000-0x80bfffff] (PCI address [0x80800000-0x80bfffff])
[    1.030000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff]
[    1.040000] pci 0000:00:03.0: BAR 2: set to [mem 0x80c00000-0x80ffffff] (PCI address [0x80c00000-0x80ffffff])
[    1.050000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff]
[    1.060000] pci 0000:00:00.0: BAR 0: set to [mem 0x81000000-0x8101ffff] (PCI address [0x81000000-0x8101ffff])
[    1.070000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff]
[    1.080000] pci 0000:00:03.0: BAR 0: set to [mem 0x81020000-0x8103ffff] (PCI address [0x81020000-0x8103ffff])
[    1.090000] Switching to clocksource MIPS
[    1.110000] NET: Registered protocol family 2
[    1.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.250000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.410000] TCP: Hash tables configured (established 1024 bind 1024)
[    1.490000] TCP reno registered
[    1.530000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.670000] NET: Registered protocol family 1
[    1.730000] Radio config found at offset 0xf8(0x1f8)
[    1.800000] Radio MAC is blank; using board-data
[    1.870000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.940000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.050000] msgmni has been set to 57
[    2.100000] io scheduler noop registered
[    2.150000] io scheduler deadline registered (default)
[    2.210000] gpiodev: gpio device registered with major 254
[    2.280000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    2.380000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
[    2.470000] cmdlinepart partition parsing not available
[    2.540000] Searching for RedBoot partition table in spiflash at offset 0x7d0000
[    2.720000] Searching for RedBoot partition table in spiflash at offset 0x7e0000
[    2.910000] 6 RedBoot partitions found on MTD device spiflash
[    2.980000] Creating 6 MTD partitions on "spiflash":
[    3.040000] 0x000000000000-0x000000030000 : "RedBoot"
[    3.110000] 0x000000030000-0x000000700000 : "rootfs"
[    3.180000] mtd: partition "rootfs" set to be root filesystem
[    3.240000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=3B0000 
[    3.340000] 0x000000350000-0x000000700000 : "rootfs_data"
[    3.410000] 0x000000700000-0x0000007d0000 : "vmlinux.bin.l7"
[    3.490000] 0x0000007e0000-0x0000007ef000 : "FIS directory"
[    3.570000] 0x0000007ef000-0x0000007f0000 : "RedBoot config"
[    3.640000] 0x0000007f0000-0x000000800000 : "boardconfig"
[    3.790000] eth0: Atheros AR231x: 00:12:cf:a4:90:50, irq 4
[    3.930000] ar231x_eth_mii: probed
[    3.970000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00)
[    4.060000] TCP westwood registered
[    4.100000] NET: Registered protocol family 17
[    4.150000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    4.230000] All bugs added by David S. Miller <davem@redhat.com>
[    4.340000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
[    4.420000] Freeing unused kernel memory: 152k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[   13.830000] JFFS2 notice: (271) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 4 of xref (0 dead, 0 orphan) found.
switching to jffs2
- init -

Please press Enter to activate this console. [   16.880000] Compat-wireless backport release: compat-wireless-2011-11-29
[   16.960000] Backport based on wireless-testing.git master-2011-12-01
[   17.450000] cfg80211: Calling CRDA to update world regulatory domain
[   21.250000] cfg80211: World regulatory domain updated:
[   21.310000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.410000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.510000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.600000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   21.700000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.790000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.900000] ath5k phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48)
[   22.530000] cfg80211: Calling CRDA for country: US
[   22.710000] cfg80211: Regulatory domain changed to country: US
[   22.780000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.880000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   22.980000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   23.080000] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.170000] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.270000] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.360000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   24.050000] RPC: Registered udp transport module.
[   24.110000] RPC: Registered tcp transport module.
[   24.160000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   25.530000] PPP generic driver version 2.4.2
[   26.690000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.720000] NET: Registered protocol family 24
[   28.490000] nf_conntrack version 0.5.0 (465 buckets, 1860 max)
[   35.300000] device eth0 entered promiscuous mode
[   35.450000] br-lan: port 1(eth0) entering forwarding state
[   35.510000] br-lan: port 1(eth0) entering forwarding state
[   41.520000] device eth0 left promiscuous mode
[   41.580000] br-lan: port 1(eth0) entering forwarding state
[   43.440000] device eth0 entered promiscuous mode
[   43.490000] br-lan: port 1(eth0) entering forwarding state
[   43.560000] br-lan: port 1(eth0) entering forwarding state
[   43.760000] device wlan0 entered promiscuous mode
[   43.820000] br-lan: port 2(wlan0) entering forwarding state
[   43.880000] br-lan: port 2(wlan0) entering forwarding state
[   45.470000] device wlan0 left promiscuous mode
[   45.530000] br-lan: port 2(wlan0) entering forwarding state
[   46.110000] device wlan0 entered promiscuous mode
[   46.160000] br-lan: port 2(wlan0) entering forwarding state
[   46.230000] br-lan: port 2(wlan0) entering forwarding state
[   48.310000] eth0: Configuring MAC for full duplex
[   72.130000] device wlan0 left promiscuous mode
[   72.190000] br-lan: port 2(wlan0) entering forwarding state
[   74.970000] device wlan0 entered promiscuous mode
[   75.090000] br-lan: port 2(wlan0) entering forwarding state
[   75.160000] br-lan: port 2(wlan0) entering forwarding state
[   77.330000] device wlan0 left promiscuous mode
[   77.380000] br-lan: port 2(wlan0) entering forwarding state
[   77.950000] device wlan0 entered promiscuous mode
[   78.010000] br-lan: port 2(wlan0) entering forwarding state
[   78.080000] br-lan: port 2(wlan0) entering forwarding state



BusyBox v1.19.3 (2012-01-27 03:52:18 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __                          \
 |       |.-----.-----.-----.|  |  |  |.----.|  |_                      \  \
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|                   \  \  \
 |_______||   __|_____|__|__||________||__|  |____|   <,  .v ,  // ) ) )  )  )
          |__| W I R E L E S S   F R E E D O M         \\; \// //     /  /  /
 ATTITUDE ADJUSTMENT (bleeding edge, r29839) ---------- ;\\|||//;       /  /
  * 1/4 oz Vodka      Pour all ingredients into mixing ,'<\/><\/`         /
  * 1/4 oz Gin        tin with ice, strain into glass.,.`X/\><\\>`
  * 1/4 oz Amaretto                                   ;>/>><\\><\/`
  * 1/4 oz Triple sec                                 |<\\>>X/<>/\|
  * 1/4 oz Peach schnapps                             `<\/><\/><\\;
  * 1/4 oz Sour mix                                    '/\<>/\<>/'
  * 1 splash Cranberry juice                             `<\/><;`
 -----------------------------------------------------WiFi_Pineapple MKIII

root@Pineapple:/# 

IMG_20130722_192836.jpg

Edited by La_Vallette
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...