Sebkinne Posted March 3, 2013 Share Posted March 3, 2013 Hey everyone, Since the last stable version (2.7.0) there have been many changes to the pineapple firmware. In version 2.8.0 you will find all changes from 2.7.0-2.7.7 plus the changes from the changelog below: Changelog: -Package Repositories -Added a 2.8.0 stable repository. No more issues with mismatched kernel versions. You will however get a "collected errors" message after the install is complete. Just ignore them if the only issue is a checksum mismatch. -Added an opkg workaround. -Various Fixes -Fixed a couple of broken links -Bugfixes Now, the changelog doesn't seem very large and granted, it isn't. But remember that this stable firmware includes all the fixes from the development firmwares. Stable firmwares are meant to be just that - stable. Their aim is not to add much functionality in comparison to the last development upgrade but rather to provide a stable, reliable firmware. We think we have come a long way since the last stable release and believe it will be a good base for the upcoming 3.0.0 release. Download: Over the air through the web-interface. (alternatively at http://cloud.wifipin...e.com?downloads)MD5: 6ac34bd228a3cc029d1f374b7248fd19Note: If coming from a firmware version below 2.6.4, wait for the pineapple to fully boot back up after flashing then navigate to http://172.16.42.1:1471 As usual, please leave any feedback in this thread.We hope you enjoy this release, it feels like one of the most stable yet!-The Jasager Team Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted March 3, 2013 Share Posted March 3, 2013 eeeeeeeeeee :D, Updating now! Nice one Sebkinne and all others who helped :D -Foxtrot Quote Link to comment Share on other sites More sharing options...
potato Posted March 3, 2013 Share Posted March 3, 2013 W00t, the lan led finally works Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted March 3, 2013 Share Posted March 3, 2013 W00t, the lan led finally works LEDs have been working since 2.7.7 :p -Foxtrot Quote Link to comment Share on other sites More sharing options...
Boba Fett Posted March 3, 2013 Share Posted March 3, 2013 When came back to home I'll try this new firmware.! Quote Link to comment Share on other sites More sharing options...
PineDominator Posted March 3, 2013 Share Posted March 3, 2013 Getting this error when trying to install tcpdump? other packages work root@Pineapple:/tmp# opkg --dest usb install tcpdump Unknown package 'tcpdump'. Collected errors: * opkg_install_cmd: Cannot install package tcpdump. Quote Link to comment Share on other sites More sharing options...
NullNull Posted March 3, 2013 Share Posted March 3, 2013 Getting this error when trying to install tcpdump? other packages work root@Pineapple:/tmp# opkg --dest usb install tcpdump Unknown package 'tcpdump'. Collected errors: * opkg_install_cmd: Cannot install package tcpdump. me too :/ Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted March 3, 2013 Author Share Posted March 3, 2013 Sorry about that - package added. It was a small oversight and needs no modifications on your part - just an opkg update ;) Quote Link to comment Share on other sites More sharing options...
NullNull Posted March 3, 2013 Share Posted March 3, 2013 Sorry about that - package added. It was a small oversight and needs no modifications on your part - just an opkg update ;) Thank you Seb :D Quote Link to comment Share on other sites More sharing options...
TylerCPU Posted March 4, 2013 Share Posted March 4, 2013 Yay! Just updated. :) Quote Link to comment Share on other sites More sharing options...
rand0mh3r0 Posted March 6, 2013 Share Posted March 6, 2013 Awesome! Updating both my devices now. Thanks Seb! Quote Link to comment Share on other sites More sharing options...
kevambert Posted March 7, 2013 Share Posted March 7, 2013 (edited) Ive upgraded to 2.8.0 but my sd card inside my huawei modem will not mount, it mounts fine on 2.7.7 and all earlier firmwares, it is showing in /dev as sda but 2.8 just seems to ignore the fstab and if I issue mount /dev/sda it mounts as sda1 and swap as sda2 Edited March 8, 2013 by kevambert Quote Link to comment Share on other sites More sharing options...
kevambert Posted March 8, 2013 Share Posted March 8, 2013 Ive upgraded to 2.8.0 but my sd card inside my huawei modem will not mount, it mounts fine on 2.7.7 and all earlier firmwares, it is showing in /dev as sda but 2.8 just seems to ignore the fstab and if I issue mount /dev/sda it mounts as sda1 and swap as sda2 I camt seem to be able to find a fix for this, every time i reboot I have to issue mount /dev/sda /usb, I get an error message failed: invalid argument but it still mounts ok to usb, its a bit of a pain having to issue the mount command everytime though Quote Link to comment Share on other sites More sharing options...
Jashmane Posted March 12, 2013 Share Posted March 12, 2013 problem's with flashing over TTL UART OVER SERIAL Iv'e done every step by step to do a clean flash over TTL UART OVER SERIAL because iv'e bricked it. Iv'e set the local area connection to iP 192.168.2.11 for the pinapple Iv'e set the same IP on Tftpd server. Iv'e set up putty right, serial line COM3 speed 115200, even in the serial tab flow control none. but putty is where i'm having a problem. once i open it i choosed 1, then i open Trtpd64 server I set my server interface to 192.168.2.11 change my dir to the factory files i run in putty "setenv bootargs "board=ALFA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd" "saveenv" "tftp 0x80600000 kernel.bin" < this is where i get stuck! putty say's ar7240> tftp 0x80600000 kernel.bin eth0 link down FAIL dup 1 speed 1000 Using eth1 device TFTP from server "192.168.2.100";<(problem it should be 192.168.2.11) our IP address is 192.168.2.1 Filename 'kernel.bin'. Load address: 0x80600000 Loading: T T T T T T T T T T Retry count exceeded; starting again eth0 link down FAIL I can't get Putty to use the 192.168.2.11 it try's to connect to 192.168.2.100. on Putty Iv'e tried everything i can think of PLZ HELP THNKS ALOT (I miss playing around with my Wifi pineapple I was learning alot) Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted March 12, 2013 Author Share Posted March 12, 2013 @Jashmane, Please make a new thread and don't put 2.8.0 unrelated issues into this thread ;) Your issue is something with the setup. Make a new thread and give more information on OS etc. Quote Link to comment Share on other sites More sharing options...
TwistedPacket Posted April 19, 2013 Share Posted April 19, 2013 I was wondering if a fix was planed for Karma? It seems not to work at all in 2.8.0? Thanks! -Tp Quote Link to comment Share on other sites More sharing options...
Johnnie Posted April 24, 2013 Share Posted April 24, 2013 I was wondering if a fix was planed for Karma? It seems not to work at all in 2.8.0? Thanks! -Tp I think they do: https://wifipineapple.com/?portal&bugs&action=view&id=19 Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted May 7, 2013 Author Share Posted May 7, 2013 The current beta seems promising. If all goes well the release of a fix will be by the end of the week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.