Jump to content

2.7.5 and USB 3G Dongles


Sebkinne
 Share

Recommended Posts

Hey everyone,

There seems to be an issue with usb-modeswitch on the 2.7.5 firmware. To debug it further though, we need a bit of help from you guys.

Anyone that has a 3G modem and is on 2.7.5, could you try to make a connection and report back if it works or not?

Anyone that has a 3G modem and is willing to help and is not on 2.7.5, could you upgrade and see if it works?

Best Regards,

Sebkinne

Link to comment
Share on other sites

No its not working for me Huawei modem, (the micro SD inside mounts to usb ok)

root@Pineapple:/pineapple/3g# ./3g.sh
Searching for attached 3G Modems
12d1:140c 1d6b:0002
Huawei Modem (3-IRL) detected. Attempting mode switch
usb_modeswitch: can't load library 'libusb-0.1.so.4'
./3g.sh: line 61: /etc/init.d/firewall: not found
./3g.sh: line 61: /etc/init.d/firewall: not found
root@Pineapple:/pineapple/3g#

Link to comment
Share on other sites

Just dusted my Pineapple off today to try it out with a USB 3g dongle - first thing I did was update the firmware to 2.7.5.

After about an hour of futzing around with the config I went into the shell and ran the usb_modeswitch directly. This is what I got: usb_modeswitch: can't load library 'libusb-0.1.so.4'.

Hope that helps!

knotworx

Link to comment
Share on other sites

Hi my Huawei E173 does not work anymore.

here the log:

00:54:31 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:30 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:30 Pineapple kern.notice kernel: [ 3270.540000] sd 51:0:0:0: [sda] Attached SCSI removable disk
00:54:30 Pineapple kern.notice kernel: [ 3270.520000] sd 51:0:0:0: Attached scsi generic sg1 type 0
00:54:30
Pineapple kern.notice kernel: [ 3270.520000] scsi 51:0:0:0:
Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
00:54:30
Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: CD-ROM
HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
00:54:30 Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: Attached scsi generic sg0 type 5
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:54:29 Pineapple kern.info kernel: [ 3269.520000] scsi51 : usb-storage 1-1:1.1
00:54:29 Pineapple kern.info kernel: [ 3269.500000] scsi50 : usb-storage 1-1:1.0
00:54:29 Pineapple kern.info kernel: [ 3269.350000] usb 1-1: new high-speed USB device number 27 using ehci-platform
00:54:25 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=? Product=? Serial=?
00:54:25 Pineapple kern.info kernel: [ 3265.200000] usb 1-1: USB disconnect, device number 26
00:54:24 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:23 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:22 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:21 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:20 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:19 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:19 Pineapple kern.notice kernel: [ 3259.310000] sd 49:0:0:0: [sda] Attached SCSI removable disk
00:54:19 Pineapple kern.notice kernel: [ 3259.300000] sd 49:0:0:0: Attached scsi generic sg1 type 0
00:54:19
Pineapple kern.notice kernel: [ 3259.290000] scsi 49:0:0:0:
Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...