Jump to content

Unable to remove Installed Infusions

weasek

By weasek
in WiFi Pineapple Mark IV

 Share

Recommended Posts

weasek Newbie

weasek

Posted
Posted

Hello community. I recently purchased the holiday Pineapple bundle. While it does work well in most cases I've found a few things that need work. The most recent issue I discovered was that I am unable to remove any installed infusions. It says its removing the selected module but never actually removes it from the list. It appears I may have run out of space on the internal memory but apparently performing a factory reset doesn't free up the space as that process only resets some settings. (May I suggest in future builds having an option to truly perform a full factory reset?)

Anyways, I was wondering what is the quickest / easiest way of performing a full reset of the Pineapple? Please advise and keep up the great work. Below is some additional information that may be useful:


00:01:14 Pineapple user.info sysinit: sh: write error: Invalid argument
00:01:14 Pineapple user.info sysinit: sh: write error: Invalid argument
00:01:14 Pineapple user.info sysinit: setting up led WLAN
00:01:14 Pineapple user.info sysinit: setting up led WAN
00:01:14 Pineapple user.info sysinit: setting up led USB
00:01:14 Pineapple user.info sysinit: setting up led LAN
00:01:14 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/mode: nonexistent directory
00:01:14 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/device_name: nonexistent directory
00:01:14 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/mode: nonexistent directory
00:01:14 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/device_name: nonexistent directory
00:01:13 Pineapple user.info sysinit: radio1(cfg053579): Invalid mode, ignored.
00:01:13 Pineapple user.info sysinit: Selected interface 'wlan0'
00:01:13 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:01:13 Pineapple user.info sysinit: OK
00:01:13 Pineapple kern.info kernel: [ 73.400000] br-lan: port 2(wlan0) entered forwarding state
00:01:11 Pineapple kern.info kernel: [ 71.400000] br-lan: port 2(wlan0) entered forwarding state
00:01:11 Pineapple kern.info kernel: [ 71.400000] br-lan: port 2(wlan0) entered forwarding state
00:01:11 Pineapple kern.info kernel: [ 71.320000] device wlan0 entered promiscuous mode
00:01:11 Pineapple kern.err kernel: [ 71.630000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
00:01:11 Pineapple kern.err kernel: [ 71.620000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00026e00
00:01:11 Pineapple daemon.info dnsmasq-dhcp[1654]: DHCPREQUEST(br-lan) 172.16.42.211 00:0a:e4:df:83:fb
00:01:11 Pineapple daemon.info dnsmasq-dhcp[1654]: DHCPOFFER(br-lan) 172.16.42.211 00:0a:e4:df:83:fb
00:01:11 Pineapple daemon.info dnsmasq-dhcp[1654]: DHCPDISCOVER(br-lan) 172.16.42.211 00:0a:e4:df:83:fb
00:01:11 Pineapple daemon.info dnsmasq-dhcp[1654]: DHCPACK(br-lan) 172.16.42.211 00:0a:e4:df:83:fb weaselXubuntu
00:01:10 Pineapple user.info sysinit: radio1(cfg053579): Invalid mode, ignored.
00:01:10 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:01:10 Pineapple kern.info kernel: [ 70.510000] device wlan0 left promiscuous mode
00:01:10 Pineapple kern.info kernel: [ 70.510000] br-lan: port 2(wlan0) entered disabled state
00:01:10 Pineapple daemon.info dnsmasq[1654]: using nameserver 8.8.8.8#53
00:01:10 Pineapple daemon.info dnsmasq[1654]: using local addresses only for domain lan
00:01:10 Pineapple daemon.info dnsmasq[1654]: using local addresses only for domain lan
00:01:10 Pineapple daemon.info dnsmasq[1654]: started, version 2.62 cachesize 150
00:01:10 Pineapple daemon.info dnsmasq[1654]: reading /tmp/resolv.conf.auto
00:01:10 Pineapple daemon.info dnsmasq[1654]: read /etc/hosts - 1 addresses
00:01:10 Pineapple daemon.info dnsmasq[1654]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
00:01:10 Pineapple daemon.info dnsmasq-dhcp[1654]: read /etc/ethers - 0 addresses
00:01:10 Pineapple daemon.info dnsmasq-dhcp[1654]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
00:01:06 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
00:01:06 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses
00:01:04 Pineapple daemon.notice netifd: wan (1288): Sending discover...
00:01:04 Pineapple authpriv.info dropbear[1595]: Running in background
00:01:03 Pineapple user.info sysinit: sed: can't create temp file '/etc/config/wirelesshVODzG': No space left on device
00:01:03 Pineapple user.info sysinit: radio1(cfg053579): Invalid mode, ignored.
00:01:03 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:01:03 Pineapple cron.info crond[1578]: crond: crond (busybox 1.19.4) started, log level 5
00:01:02 Pineapple kern.info kernel: [ 62.970000] br-lan: port 2(wlan0) entered forwarding state
00:01:01 Pineapple daemon.notice netifd: wan (1288): Sending discover...
00:01:00 Pineapple user.info autossh[1433]: starting ssh (count 1)
00:01:00 Pineapple user.info autossh[1433]: ssh child pid is 1434
00:01:00 Pineapple user.err autossh[1433]: ssh exited prematurely with status 1; autossh exiting
00:01:00 Pineapple kern.info kernel: [ 60.970000] br-lan: port 2(wlan0) entered forwarding state
00:01:00 Pineapple kern.info kernel: [ 60.970000] br-lan: port 2(wlan0) entered forwarding state
00:01:00 Pineapple kern.info kernel: [ 60.890000] device wlan0 entered promiscuous mode
00:01:00 Pineapple kern.info kernel: [ 60.130000] br-lan: port 1(eth0) entered forwarding state
00:00:59 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo)
00:00:59 Pineapple user.info sysinit: radio1(cfg053579): Invalid mode, ignored.
00:00:59 Pineapple user.info sysinit: radio1(cfg053579): Invalid mode, ignored.
00:00:59 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:00:59 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:00:59 Pineapple user.err autossh[1318]: ssh exited prematurely with status 1; autossh exiting
00:00:58 Pineapple user.notice ifup: Enabling Router Solicitations on lan (br-lan)
00:00:58 Pineapple user.info autossh[1318]: starting ssh (count 1)
00:00:58 Pineapple user.info autossh[1318]: ssh child pid is 1321
00:00:58 Pineapple kern.info kernel: [ 58.130000] eth0: link up (1000Mbps/Full duplex)
00:00:58 Pineapple kern.info kernel: [ 58.130000] br-lan: port 1(eth0) entered forwarding state
00:00:58 Pineapple kern.info kernel: [ 58.130000] br-lan: port 1(eth0) entered forwarding state
00:00:58 Pineapple daemon.notice netifd: wan (1288): Sending discover...
00:00:57 Pineapple kern.info kernel: [ 57.460000] device eth0 entered promiscuous mode
00:00:57 Pineapple daemon.notice netifd: wan (1288): udhcpc (v1.19.4) started
00:00:57 Pineapple daemon.notice netifd: Interface 'loopback' is now up
00:00:57 Pineapple daemon.notice netifd: Interface 'lan' is now up
00:00:48 Pineapple kern.info kernel: [ 48.330000] Adding 1062908k swap on /dev/sda2. Priority:-1 extents:1 across:1062908k
00:00:47 Pineapple kern.info kernel: [ 47.440000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
00:00:41 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Kingston Product=DataTraveler_2.0 Serial=5B820A000595
00:00:41 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
00:00:39 Pineapple kern.notice kernel: [ 37.610000] sd 0:0:0:0: Attached scsi generic sg0 type 0
00:00:39 Pineapple kern.notice kernel: [ 13.850000] sd 0:0:0:0: [sda] Attached SCSI removable disk
00:00:39 Pineapple kern.info kernel: [ 37.480000] usbcore: registered new interface driver rndis_host
00:00:39 Pineapple kern.info kernel: [ 37.280000] usbcore: registered new interface driver cdc_ether
00:00:39 Pineapple kern.info kernel: [ 37.230000] usbserial: USB Serial Driver core
00:00:39 Pineapple kern.info kernel: [ 37.230000] usbcore: registered new interface driver usbserial_generic
00:00:39 Pineapple kern.info kernel: [ 37.220000] usbcore: registered new interface driver usbserial
00:00:39 Pineapple kern.info kernel: [ 37.220000] USB Serial support registered for generic
00:00:39 Pineapple kern.info kernel: [ 36.960000] usbcore: registered new interface driver ath9k_htc
00:00:39 Pineapple kern.info kernel: [ 36.150000] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
00:00:39 Pineapple kern.info kernel: [ 36.020000] NET: Registered protocol family 24
00:00:39 Pineapple kern.info kernel: [ 35.800000] ip_tables: (C) 2000-2006 Netfilter Core Team
00:00:39 Pineapple kern.info kernel: [ 35.540000] tun: (C) 1999-2004 Max Krasnyansky
00:00:39 Pineapple kern.info kernel: [ 35.530000] tun: Universal TUN/TAP device driver, 1.6
00:00:39 Pineapple kern.info kernel: [ 35.390000] PPP generic driver version 2.4.2
00:00:39 Pineapple kern.info kernel: [ 35.040000] RPC: Registered tcp transport module.
00:00:39 Pineapple kern.info kernel: [ 35.040000] RPC: Registered tcp NFSv4.1 backchannel transport module.
00:00:39 Pineapple kern.info kernel: [ 35.030000] RPC: Registered udp transport module.
00:00:39 Pineapple kern.info kernel: [ 35.030000] RPC: Registered named UNIX socket transport module.
00:00:39 Pineapple kern.info kernel: [ 34.780000] Button Hotplug driver version 0.4.1
00:00:39 Pineapple kern.info kernel: [ 34.760000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
00:00:39 Pineapple kern.info kernel: [ 34.760000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 34.750000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 34.740000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:39 Pineapple kern.info kernel: [ 34.740000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 34.730000] cfg80211: Regulatory domain changed to country: GB
00:00:39 Pineapple kern.info kernel: [ 34.730000] cfg80211: Calling CRDA for country: GB
00:00:39 Pineapple kern.info kernel: [ 34.650000] usbcore: registered new interface driver rt2800usb
00:00:39 Pineapple kern.info kernel: [ 34.630000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
00:00:39 Pineapple kern.info kernel: [ 34.590000] usbcore: registered new interface driver rtl8187
00:00:39 Pineapple kern.info kernel: [ 34.440000] usbcore: registered new interface driver rt73usb
00:00:39 Pineapple kern.info kernel: [ 33.970000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.960000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.950000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.950000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.940000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.930000] cfg80211: World regulatory domain updated:
00:00:39 Pineapple kern.info kernel: [ 33.930000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:39 Pineapple kern.info kernel: [ 33.050000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.040000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.030000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.020000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.020000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
00:00:39 Pineapple kern.info kernel: [ 33.010000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
00:00:39 Pineapple kern.info kernel: [ 33.000000] cfg80211: World regulatory domain updated:
00:00:39 Pineapple kern.info kernel: [ 33.000000] cfg80211: Calling CRDA to update world regulatory domain
00:00:39 Pineapple kern.info kernel: [ 32.960000] compat.git: wireless-testing.git
00:00:39 Pineapple kern.info kernel: [ 32.960000] Backport based on wireless-testing.git master-2012-07-16
00:00:39 Pineapple kern.info kernel: [ 32.950000] Compat-wireless backport release: compat-wireless-2012-07-13
00:00:39 Pineapple kern.info kernel: [ 32.080000] eth0: link down
00:00:39 Pineapple kern.info kernel: [ 13.840000] sda: sda1 sda2
00:00:39 Pineapple kern.err kernel: [ 37.380000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
00:00:39 Pineapple kern.err kernel: [ 13.850000] sd 0:0:0:0: [sda] Assuming drive cache: write through
00:00:39 Pineapple kern.err kernel: [ 13.840000] sd 0:0:0:0: [sda] No Caching mode page present
00:00:39 Pineapple kern.err kernel: [ 13.830000] sd 0:0:0:0: [sda] No Caching mode page present
00:00:39 Pineapple kern.err kernel: [ 13.830000] sd 0:0:0:0: [sda] Assuming drive cache: write through
00:00:39 Pineapple kern.debug kernel: [ 34.630000] Registered led device: ath9k-phy0
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: doing EEPROM country->regdmn map search
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: country maps to regdmn code: 0x37
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: Regpair used: 0x37
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: EEPROM regdomain: 0x833a
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: EEPROM indicates we should expect a country code
00:00:39 Pineapple kern.debug kernel: [ 34.620000] ath: Country alpha2 being used: GB
19:35:01 Pineapple user.notice root: CLEANUP: memory looking good
19:35:01 Pineapple user.notice root: CLEANUP: Karma log looking good
19:35:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed
19:35:01 Pineapple cron.info crond[1578]: crond: USER root pid 2686 cmd /pineapple/scripts/cleanup.sh
19:30:01 Pineapple user.notice root: CLEANUP: memory looking good
19:30:01 Pineapple user.notice root: CLEANUP: Karma log looking good
19:30:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed
19:30:01 Pineapple cron.info crond[1578]: crond: USER root pid 2674 cmd /pineapple/scripts/cleanup.sh
19:25:01 Pineapple user.notice root: CLEANUP: memory looking good
19:25:01 Pineapple user.notice root: CLEANUP: Karma log looking good
19:25:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed
19:25:01 Pineapple cron.info crond[1578]: crond: USER root pid 2662 cmd /pineapple/scripts/cleanup.sh
19:20:31 Pineapple authpriv.notice dropbear[2617]: Password auth succeeded for 'root' from 172.16.42.42:54197
19:20:23 Pineapple authpriv.info dropbear[2617]: Child connection from 172.16.42.42:54197
19:20:01 Pineapple user.notice root: CLEANUP: memory looking good
19:20:01 Pineapple user.notice root: CLEANUP: Karma log looking good
19:20:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed
19:20:01 Pineapple cron.info crond[1578]: crond: USER root pid 2605 cmd /pineapple/scripts/cleanup.sh
19:16:06 Pineapple cron.err crond[1578]: time disparity of 22614915 minutes detected
[/CODE]

Link to comment
Share on other sites
weasek Newbie

weasek

Posted
  • Author
Posted (edited)

SOLUTION:

My apologies. I discovered that simply navigating to the web UI, Upgrade, then upload the latest upgrade.bin file located at http://cloud.wifipineapple.com/index.php?downloads does the trick. NOTE: Sending a Re-flash command fails due to no space on the internal memory to save the .bin so first saving the .bin to your pc then uploading directly to the Pineapple is necessary.

I hope this helps someone in the future.

Edited by weasek
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...