creatox Posted November 8, 2012 Share Posted November 8, 2012 yo... I've got a mk4 running 2.7 firmware. Everything is working extremely groovy except awus036nha is not mounting on startup/reboot. if i physically disconnect and reconnect the device, it works no problem. root@Pineapple:~# lsusbBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed HubBus 001 Device 003: ID 1b1c:0b29 CorsairBus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n[/CODE]*ouput device is presently connected to powered usb hub. symptoms are the same if directly connected[CODE]root@Pineapple:~# dmesg |grep usb[ 6.320000] Registered led device: alfa:blue:usb[ 10.680000] usbcore: registered new interface driver usbfs[ 10.680000] usbcore: registered new interface driver hub[ 10.690000] usbcore: registered new device driver usb[ 11.700000] usbcore: registered new interface driver usb-storage[ 11.810000] usb 1-1: new high-speed USB device number 2 using ehci-platform[ 12.240000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform[ 12.370000] scsi0 : usb-storage 1-1.1:1.0[ 12.470000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform[ 34.550000] usbcore: registered new interface driver rt73usb[ 34.690000] usbcore: registered new interface driver rtl8187[ 34.750000] usbcore: registered new interface driver rt2800usb[ 37.070000] usb 1-1.2: ath9k_htc: Firmware htc_9271.fw requested[ 37.080000] usbcore: registered new interface driver ath9k_htc[ 37.450000] usbcore: registered new interface driver usbserial[ 37.460000] usbcore: registered new interface driver usbserial_generic[ 37.460000] usbserial: USB Serial Driver core[ 37.550000] usbcore: registered new interface driver cdc_ether[ 37.760000] usbcore: registered new interface driver rndis_host[ 38.080000] usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272[/CODE]looks like the drivers are loaded.. ifconfig wlan1 up shows no love.i feel like i've seen a thread suggesting to add something to fstab.. but i cant find it.any advice? Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 8, 2012 Share Posted November 8, 2012 Perhaps it has something to do with this... Quote Link to comment Share on other sites More sharing options...
loozr Posted November 8, 2012 Share Posted November 8, 2012 (edited) Perhaps it has something to do with this... http://forums.hak5.o...nha#entry210171 I should mention that the thread you are referring to mr. surgarat is in regards of an AWUS036H. However I have just recieved a AWUS036NHA, which do not have the problem in my previous post. But I can verify that my new AWUS036NHA will not be mounting on reboot. However unplug/plug brings the device up. Edit; There is actually several messages in the log about this. 00:02:11 Pineapple user.info sysinit: Selected interface 'wlan0' 00:02:11 Pineapple user.info sysinit: PHY for wifi device radio1 not found 00:02:11 Pineapple user.info sysinit: OK 00:02:11 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/mode: nonexistent directory 00:02:11 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/device_name: nonexistent directory 00:02:11 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/mode: nonexistent directory 00:02:11 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/device_name: nonexistent directory 00:02:11 Pineapple user.err autossh[1406]: ssh exited prematurely with status 1; autossh exiting 00:02:11 Pineapple kern.info kernel: [ 131.180000] br-lan: port 2(wlan0) entered forwarding state 00:02:09 Pineapple kern.info kernel: [ 129.180000] br-lan: port 2(wlan0) entered forwarding state 00:02:09 Pineapple kern.info kernel: [ 129.180000] br-lan: port 2(wlan0) entered forwarding state 00:02:09 Pineapple kern.info kernel: [ 129.100000] device wlan0 entered promiscuous mode 00:02:08 Pineapple user.info sysinit: PHY for wifi device radio1 not found 00:02:08 Pineapple kern.info kernel: [ 128.210000] device wlan0 left promiscuous mode 00:02:08 Pineapple kern.info kernel: [ 128.210000] br-lan: port 2(wlan0) entered disabled state 00:02:07 Pineapple daemon.info dnsmasq[1797]: using nameserver 8.8.8.8#53 00:02:07 Pineapple daemon.info dnsmasq[1797]: using nameserver 192.168.1.1#53 00:02:07 Pineapple daemon.info dnsmasq[1797]: using local addresses only for domain lan 00:02:07 Pineapple daemon.info dnsmasq[1797]: using local addresses only for domain lan 00:02:07 Pineapple daemon.info dnsmasq[1797]: started, version 2.62 cachesize 150 00:02:07 Pineapple daemon.info dnsmasq[1797]: reading /tmp/resolv.conf.auto 00:02:07 Pineapple daemon.info dnsmasq[1797]: read /etc/hosts - 1 addresses 00:02:07 Pineapple daemon.info dnsmasq[1797]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack 00:02:07 Pineapple daemon.info dnsmasq-dhcp[1797]: read /etc/ethers - 0 addresses 00:02:07 Pineapple daemon.info dnsmasq-dhcp[1797]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h 00:02:04 Pineapple user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! 00:02:04 Pineapple user.notice dnsmasq: Allowing 127.0.0.0/8 responses 00:02:02 Pineapple user.notice ifup: Allowing Router Advertisements on wan (eth1) 00:02:01 Pineapple daemon.notice netifd: wan (1375): Sending select for 192.168.1.102... 00:02:01 Pineapple daemon.notice netifd: wan (1375): Sending discover... 00:02:01 Pineapple daemon.notice netifd: wan (1375): Lease of 192.168.1.102 obtained, lease time 43200 00:02:01 Pineapple daemon.notice netifd: Interface 'wan' is now up 00:02:01 Pineapple cron.info crond[1674]: crond: crond (busybox 1.19.4) started, log level 5 00:02:01 Pineapple authpriv.info dropbear[1692]: Running in background 00:02:00 Pineapple user.info sysinit: PHY for wifi device radio1 not found 00:02:00 Pineapple kern.info kernel: [ 120.370000] br-lan: port 2(wlan0) entered forwarding state 00:01:58 Pineapple kern.info kernel: [ 118.420000] eth1: link up (100Mbps/Full duplex) 00:01:58 Pineapple kern.info kernel: [ 118.370000] br-lan: port 2(wlan0) entered forwarding state 00:01:58 Pineapple kern.info kernel: [ 118.370000] br-lan: port 2(wlan0) entered forwarding state 00:01:58 Pineapple kern.info kernel: [ 118.290000] device wlan0 entered promiscuous mode 00:01:58 Pineapple daemon.notice netifd: wan (1375): Sending discover... 00:01:58 Pineapple daemon.info hostapd: wlan0: STA 00:24:d6:a2:ac:88 IEEE 802.11: authenticated 00:01:58 Pineapple daemon.info hostapd: wlan0: STA 00:24:d6:a2:ac:88 IEEE 802.11: associated (aid 1) 00:01:57 Pineapple user.notice ifup: Enabling Router Solicitations on loopback (lo) 00:01:57 Pineapple user.info sysinit: PHY for wifi device radio1 not found 00:01:56 Pineapple user.info sysinit: PHY for wifi device radio1 not found Edited November 8, 2012 by loozr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.