AlienG Posted October 16, 2012 Share Posted October 16, 2012 Pineapple Hardware Version Mark IV Pineapple Software Version 2.1 OS used to connect to the pineapple: Ubuntu Network layout of how your setup is connected (including IP information): Ethernet cable from AP to Pineapple LAN port, Ethernet cable from PoE to PC. Ping results from computer to pineapple: None Is the problem repeatable (Yes/No): Yes Steps taken which created the problem: Initial installation Error Messages: "connecting to wifipineapple.com | 69.163.250.20 | :80... stay just like that Log file information: Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted October 16, 2012 Share Posted October 16, 2012 Upgrade your firmware. Best, Sebkinne Quote Link to comment Share on other sites More sharing options...
AlienG Posted October 16, 2012 Author Share Posted October 16, 2012 Upgrade your firmware. Best, Sebkinne That's what I'm trying to do, but for some reason it won't connect to my PC anymore. Right now I'm installing VMware fusion on my Mac to use the pineapple there... Quote Link to comment Share on other sites More sharing options...
AlienG Posted October 16, 2012 Author Share Posted October 16, 2012 That's what I'm trying to do, but for some reason it won't connect to my PC anymore. Right now I'm installing VMware fusion on my Mac to use the pineapple there... Is it normal that from the Terminal after typing http://wifipineapple.com/wp4.sh show failed: No route to host????? Quote Link to comment Share on other sites More sharing options...
Sah5die Posted October 16, 2012 Share Posted October 16, 2012 do you have serial access? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted October 16, 2012 Share Posted October 16, 2012 do you have serial access? That isn't what he is looking for. His issue is with the wp4 script. I replied to him in a PM and gave him the solution. Quote Link to comment Share on other sites More sharing options...
AlienG Posted October 16, 2012 Author Share Posted October 16, 2012 Seb, I did exactly as the video but the issue is that after sudo ./wp4.sh won't ping the mk4. Also when I open the browser and type 172.16.42.1:1471 or 172.16.42.1/pineapple it won't connect. Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted October 16, 2012 Share Posted October 16, 2012 Go into your network manager, "Edit Connections", click on "Wired Connection", Un-check the box that says "Automatically Connect", Save Settings, Re-run wp4.sh Quote Link to comment Share on other sites More sharing options...
AlienG Posted October 16, 2012 Author Share Posted October 16, 2012 (edited) DID {Go into your network manager, "Edit Connections", click on "Wired Connection", Un-check the box that says "Automatically Connect", Save Settings, Re-run wp4.sh} Pineapple Netmask [255.255.255.0]: Pineapple Network [172.16.42.0/24]: Interface between PC and Pineapple [eth0]: Interface between PC and Internet [wlan0]: Internet Gateway [192.168.2.1]: XXX.XXX.X.X IP Address of Host PC [172.16.42.42]: IP Address of Pineapple [172.16.42.1]: _ . ___ \||/ Internet: 192.168.2.1 - wlan0 ( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42 (_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0 Browse to http://172.16.42.1/pineapple -- Happy Hacking! But it won't connect from browser not sure why.... Edited October 16, 2012 by AlienG Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted October 16, 2012 Share Posted October 16, 2012 Run this command after doing all of the above: ping 172.16.42.1 What happens? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.