Jump to content

Q: Usb Working Untill Wifi Adapter Plugs In


Recommended Posts

Hello Hak5 members,

I have got the following issue. I want to have an usb storage (the cruzer fit, 4gb) and an external wifi card (036h) via a usb hub.

This is not possible at the moment.

When I connect the usb mass storage through the hub all is well. Though if I connect the wifi card on the same hub as well, it 'kicks' out the usb mass storage.

Firmware version = 2.5.0

USB = Cruzer Fit 4 GB

Wifi Card = Alfa 036H

Also, all is correclty configured with the swap & storage in fstab.

Any Idea's on how to tackle this issue?

Thanks in advance,

Vlek007.

Link to post
Share on other sites

newer versions of the frimware have addressed some issues with usb wifi adapters, but your issue sounds different. again is the hub powered?

Hey all,

The USB HUB is not powered.

Furthermore, I believe its an issue with the hub, because now I have the exact same problem as before, though its now not even working with the hub.

Here is the log:


11:18:12 Pineapple kern.info kernel: [ 528.440000] usb 1-1.1: new high-speed USB device number 15 using ath79-ehci
11:18:12 Pineapple kern.err kernel: [ 528.250000] usb 1-1.1: device descriptor read/64, error -145
11:17:56 Pineapple kern.err kernel: [ 513.060000] usb 1-1.1: device descriptor read/64, error -145
11:17:41 Pineapple kern.warn kernel: [ 497.770000] lost page write due to I/O error on sda1
11:17:41 Pineapple kern.info kernel: [ 497.980000] usb 1-1.1: new high-speed USB device number 14 using ath79-ehci
11:17:41 Pineapple kern.info kernel: [ 497.820000] usb 1-1.1: USB disconnect, device number 13
11:17:41 Pineapple kern.info kernel: [ 497.750000] sd 1:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 28 00 3e 00 00 08 00
11:17:41 Pineapple kern.info kernel: [ 497.750000] sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
11:17:41 Pineapple kern.info kernel: [ 497.740000] sd 1:0:0:0: [sda] Unhandled error code
11:17:41 Pineapple kern.info kernel: [ 497.720000] sd 1:0:0:0: [sda] killing request
11:17:41 Pineapple kern.info kernel: [ 497.710000] sd 1:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 09 4e 00 00 d8 00
11:17:41 Pineapple kern.info kernel: [ 497.710000] sd 1:0:0:0: [sda] Result: hostbyte=0x05 driverbyte=0x00
11:17:41 Pineapple kern.info kernel: [ 497.700000] sd 1:0:0:0: [sda] Unhandled error code
11:17:41 Pineapple kern.info kernel: [ 497.700000] sd 1:0:0:0: Device offlined - not ready after error recovery
11:17:41 Pineapple kern.err kernel: [ 497.860000] EXT4-fs (sda1): previous I/O error to superblock detected
11:17:41 Pineapple kern.err kernel: [ 497.850000] JBD2: I/O error detected when updating journal superblock for sda1-8.
11:17:41 Pineapple kern.err kernel: [ 497.850000] Aborting journal on device sda1-8.
11:17:41 Pineapple kern.err kernel: [ 497.830000] EXT4-fs (sda1): previous I/O error to superblock detected
11:17:41 Pineapple kern.err kernel: [ 497.810000] JBD2: I/O error detected when updating journal superblock for sda1-8.
11:17:41 Pineapple kern.err kernel: [ 497.800000] sd 1:0:0:0: rejecting I/O to offline device
11:17:41 Pineapple kern.err kernel: [ 497.790000] EXT4-fs (sda1): previous I/O error to superblock detected
11:17:41 Pineapple kern.err kernel: [ 497.780000] sd 1:0:0:0: rejecting I/O to offline device
11:17:41 Pineapple kern.err kernel: [ 497.770000] Buffer I/O error on device sda1, logical block 327680
11:17:41 Pineapple kern.err kernel: [ 497.760000] end_request: I/O error, dev sda, sector 2621502
11:17:41 Pineapple kern.err kernel: [ 497.720000] sd 1:0:0:0: rejecting I/O to offline device
11:17:41 Pineapple kern.err kernel: [ 497.720000] sd 1:0:0:0: rejecting I/O to offline device
11:17:41 Pineapple kern.err kernel: [ 497.720000] sd 1:0:0:0: rejecting I/O to offline device
11:17:41 Pineapple kern.err kernel: [ 497.720000] end_request: I/O error, dev sda, sector 2382
11:17:41 Pineapple kern.err kernel: [ 497.590000] usb 1-1.1: device descriptor read/8, error -145
11:17:41 Pineapple kern.emerg kernel: [ 497.900000] journal commit I/O error
11:17:41 Pineapple kern.crit kernel: [ 497.960000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm php: reading directory lblock 0
11:17:41 Pineapple kern.crit kernel: [ 497.930000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm ls: reading directory lblock 0
11:17:41 Pineapple kern.crit kernel: [ 497.920000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #2: comm ls: reading directory lblock 0
11:17:41 Pineapple kern.crit kernel: [ 497.860000] EXT4-fs error (device sda1): __ext4_get_inode_loc:3657: inode #1440: block 301: comm ls: unable to read itable block
11:17:41 Pineapple kern.crit kernel: [ 497.830000] EXT4-fs error (device sda1): __ext4_get_inode_loc:3657: inode #1494: block 305: comm ls: unable to read itable block
11:17:41 Pineapple kern.crit kernel: [ 497.800000] EXT4-fs error (device sda1): ext4_find_entry:935: inode #84: comm uhttpd: reading directory lblock 0
11:17:41 Pineapple kern.crit kernel: [ 497.780000] EXT4-fs error (device sda1): __ext4_get_inode_loc:3657: inode #1494: block 305: comm ls: unable to read itable block
11:17:36 Pineapple kern.err kernel: [ 492.460000] usb 1-1.1: device descriptor read/8, error -145
11:17:31 Pineapple kern.info kernel: [ 487.430000] usb 1-1.1: reset high-speed USB device number 13 using ath79-ehci
11:17:31 Pineapple kern.err kernel: [ 487.240000] usb 1-1.1: device descriptor read/8, error -145
11:17:25 Pineapple kern.err kernel: [ 482.110000] usb 1-1.1: device descriptor read/8, error -145
11:17:20 Pineapple kern.info kernel: [ 477.080000] usb 1-1.1: reset high-speed USB device number 13 using ath79-ehci
11:17:20 Pineapple kern.err kernel: [ 476.890000] usb 1-1.1: device descriptor read/64, error -145
11:17:05 Pineapple kern.err kernel: [ 461.700000] usb 1-1.1: device descriptor read/64, error -145
11:17:01 Pineapple authpriv.notice dropbear[2367]: Password auth succeeded for 'root' from 172.16.42.42:56391
11:16:57 Pineapple authpriv.info dropbear[2367]: Child connection from 172.16.42.42:56391
11:16:50 Pineapple kern.info kernel: [ 446.620000] usb 1-1.1: reset high-speed USB device number 13 using ath79-ehci
11:16:50 Pineapple kern.err kernel: [ 446.430000] usb 1-1.1: device descriptor read/64, error -145
11:16:48 Pineapple authpriv.info dropbear[2282]: Exit (root): Disconnect received
11:16:35 Pineapple kern.err kernel: [ 431.240000] usb 1-1.1: device descriptor read/64, error -145
11:16:19 Pineapple kern.info kernel: [ 416.160000] usb 1-1.1: reset high-speed USB device number 13 using ath79-ehci
11:15:46 Pineapple authpriv.notice dropbear[2282]: Password auth succeeded for 'root' from 172.16.42.42:56383
11:15:41 Pineapple authpriv.info dropbear[2282]: Child connection from 172.16.42.42:56383
11:15:23 Pineapple kern.warn kernel: [ 359.270000] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
11:15:23 Pineapple kern.info kernel: [ 359.610000] Adding 980216k swap on /dev/sda2. Priority:-1 extents:1 across:980216k
11:15:23 Pineapple kern.info kernel: [ 359.290000] EXT4-fs (sda1): recovery complete
11:15:23 Pineapple kern.info kernel: [ 359.290000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
11:15:22 Pineapple kern.notice kernel: [ 358.550000] sd 1:0:0:0: [sda] Attached SCSI removable disk
11:15:22 Pineapple kern.notice kernel: [ 358.510000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
11:15:22 Pineapple kern.notice kernel: [ 358.500000] sd 1:0:0:0: [sda] Write Protect is off
11:15:22 Pineapple kern.notice kernel: [ 358.500000] sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
11:15:22 Pineapple kern.notice kernel: [ 358.480000] sd 1:0:0:0: Attached scsi generic sg0 type 0
11:15:22 Pineapple kern.notice kernel: [ 358.480000] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Fit 1.22 PQ: 0 ANSI: 5
11:15:22 Pineapple kern.info kernel: [ 358.530000] sda: sda1 sda2
11:15:22 Pineapple kern.debug kernel: [ 358.510000] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
11:15:21 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=? Product=USB2.0_Hub Serial=?
11:15:21 Pineapple user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=SanDisk Product=Cruzer_Fit Serial=4C532000030116121501
11:15:21 Pineapple kern.info kernel: [ 357.480000] scsi1 : usb-storage 1-1.1:1.0
11:15:21 Pineapple kern.info kernel: [ 357.360000] usb 1-1.1: new high-speed USB device number 13 using ath79-ehci
11:15:20 Pineapple kern.info kernel: [ 357.060000] hub 1-1:1.0: USB hub found
11:15:20 Pineapple kern.info kernel: [ 357.060000] hub 1-1:1.0: 4 ports detected
11:15:20 Pineapple kern.info kernel: [ 356.910000] usb 1-1: new high-speed USB device number 12 using ath79-ehci
11:15:14 Pineapple kern.info kernel: [ 350.420000] usb 1-1: USB disconnect, device number 2
11:15:14 Pineapple kern.err kernel: [ 350.420000] hub 1-1:1.0: cannot disable port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.380000] hub 1-1:1.0: unable to enumerate USB device on port 1
11:15:14 Pineapple kern.err kernel: [ 350.380000] hub 1-1:1.0: cannot disable port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.340000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.340000] hub 1-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
11:15:14 Pineapple kern.err kernel: [ 350.300000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.270000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.230000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:14 Pineapple kern.err kernel: [ 350.200000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 350.160000] hub 1-1:1.0: cannot disable port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 350.120000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 350.120000] hub 1-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
11:15:13 Pineapple kern.err kernel: [ 350.080000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 350.050000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 350.010000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.980000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.940000] hub 1-1:1.0: cannot disable port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.900000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.900000] hub 1-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
11:15:13 Pineapple kern.err kernel: [ 349.870000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.830000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.790000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.760000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.720000] hub 1-1:1.0: cannot disable port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.690000] hub 1-1:1.0: Cannot enable port 1. Maybe the USB cable is bad?
11:15:13 Pineapple kern.err kernel: [ 349.680000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.650000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.610000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.580000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:13 Pineapple kern.err kernel: [ 349.540000] hub 1-1:1.0: cannot reset port 1 (err = -71)
11:15:02 Pineapple kern.err kernel: [ 338.790000] usb 1-1.1: device descriptor read/64, error -145
11:15:01 Pineapple user.notice root: CLEANUP: memory looking good
11:15:01 Pineapple user.notice root: CLEANUP: Karma log looking good
11:15:01 Pineapple user.notice root: CLEANUP: Clean-up Script Executed
11:15:01 Pineapple cron.info crond[1536]: crond: USER root pid 2004 cmd /www/pineapple/scripts/cleanup.sh
11:14:47 Pineapple kern.info kernel: [ 323.710000] usb 1-1.1: new high-speed USB device number 8 using ath79-ehci
11:14:24 Pineapple cron.err crond[1536]: time disparity of 22473310 minutes detected
00:03:59 Pineapple kern.info kernel: [ 239.420000] eth0: link up (1000Mbps/Full duplex)
00:03:59 Pineapple kern.info kernel: [ 239.420000] br-lan: port 1(eth0) entering forwarding state
00:03:59 Pineapple kern.info kernel: [ 239.420000] br-lan: port 1(eth0) entering forwarding state
00:03:58 Pineapple kern.info kernel: [ 238.090000] br-lan: port 1(eth0) entering forwarding state
00:03:57 Pineapple user.info sysinit: sh: write error: Invalid argument
00:03:57 Pineapple user.info sysinit: sh: write error: Invalid argument
00:03:57 Pineapple user.info sysinit: setting up led WLAN
00:03:57 Pineapple user.info sysinit: setting up led WAN
00:03:57 Pineapple user.info sysinit: setting up led USB
00:03:57 Pineapple user.info sysinit: setting up led LAN
00:03:57 Pineapple user.info sysinit: Selected interface 'wlan0'
00:03:57 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:03:57 Pineapple user.info sysinit: OK
00:03:57 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/mode: nonexistent directory
00:03:57 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/device_name: nonexistent directory
00:03:57 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/mode: nonexistent directory
00:03:57 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/device_name: nonexistent directory
00:03:57 Pineapple user.info sysinit: 'radio1' is disabled
00:03:57 Pineapple kern.info kernel: [ 237.700000] eth0: link down
00:03:57 Pineapple kern.info kernel: [ 237.630000] br-lan: port 2(wlan0) entering forwarding state
00:03:57 Pineapple kern.info kernel: [ 237.620000] device wlan0 entered promiscuous mode
00:03:57 Pineapple kern.info kernel: [ 237.620000] br-lan: port 2(wlan0) entering forwarding state
00:03:57 Pineapple kern.info kernel: [ 237.480000] device wlan0 left promiscuous mode
00:03:57 Pineapple kern.info kernel: [ 237.480000] br-lan: port 2(wlan0) entering forwarding state
00:03:57 Pineapple kern.info kernel: [ 237.090000] eth0: link up (1000Mbps/Full duplex)
00:03:57 Pineapple kern.info kernel: [ 237.090000] br-lan: port 1(eth0) entering forwarding state
00:03:57 Pineapple kern.info kernel: [ 237.090000] br-lan: port 1(eth0) entering forwarding state
00:03:55 Pineapple user.err autossh[1245]: ssh exited prematurely with status 1; autossh exiting
00:03:55 Pineapple kern.info kernel: [ 235.460000] br-lan: port 1(eth0) entering forwarding state
00:03:55 Pineapple kern.info kernel: [ 235.430000] br-lan: port 2(wlan0) entering forwarding state
00:03:55 Pineapple kern.info kernel: [ 235.430000] br-lan: port 2(wlan0) entering forwarding state
00:03:55 Pineapple kern.info kernel: [ 235.420000] device wlan0 entered promiscuous mode
00:03:55 Pineapple kern.info kernel: [ 235.370000] eth0: link down
00:03:55 Pineapple kern.err kernel: [ 235.700000] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
00:03:55 Pineapple kern.err kernel: [ 235.690000] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006400
00:03:54 Pineapple user.info sysinit: PHY for wifi device radio1 not found
00:03:54 Pineapple user.info sysinit: 'radio1' is disabled
00:03:54 Pineapple kern.info kernel: [ 234.740000] eth0: link up (1000Mbps/Full duplex)
00:03:54 Pineapple kern.info kernel: [ 234.740000] br-lan: port 1(eth0) entering forwarding state
00:03:54 Pineapple kern.info kernel: [ 234.740000] br-lan: port 1(eth0) entering forwarding state
[/CODE]

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...