Whistle Master Posted November 4, 2012 Author Share Posted November 4, 2012 Thanks for the report thesugarat, I will have a look at the apostrophe issue. Quote Link to comment Share on other sites More sharing options...
Blackrabt Posted November 7, 2012 Share Posted November 7, 2012 ok so: by clicking access points (like 5th reboot though) i finally get the list to show up pick my native wifi ssid set the password from the router but i can't seem to get a wireless connection... I know this is an older post but I am having a similar problem, I cannot get the Available AP list to show anything even after reboot and multiple refreshes. Can you please offer some insight? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 7, 2012 Share Posted November 7, 2012 You using an external USB wifi or the internal one? Quote Link to comment Share on other sites More sharing options...
Blackrabt Posted November 7, 2012 Share Posted November 7, 2012 (edited) I have tried with the pineapple wifi and a usb Wifi (alfa b/g/n). Both use ath9k drivers. Ps: using Mk4 with 2.7 firmware Edited November 7, 2012 by Blackrabt Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 7, 2012 Share Posted November 7, 2012 Ok so manage it from a wired connection. Go to the Status page and turn off wireless. Then go to the network manager page and turn it on. Then run the AP finder and make sure on that pop up you select the correct interface to refresh. Quote Link to comment Share on other sites More sharing options...
Blackrabt Posted November 8, 2012 Share Posted November 8, 2012 (edited) Many thanks for the help thesugarat, I have the list working now. I appreciate you taking the time. I am still having some issues getting the fuctionality I want but I have some ideas to try before looking for handouts again. Edited November 8, 2012 by Blackrabt Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 8, 2012 Share Posted November 8, 2012 No problem, glad I could help. Whistle Master, Why are the Enterprise WPA modes disabled? I see the options in networkmanager_vars.php but the have \\ in front of them. Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted November 8, 2012 Author Share Posted November 8, 2012 (edited) You are right, everything is ready in the module but when I did the testing, I realized the Enterprise mode was not supported by our pineapple unfortunately. Edited November 8, 2012 by Whistle Master Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 8, 2012 Share Posted November 8, 2012 Ahh thanks. That makes sense. Quote Link to comment Share on other sites More sharing options...
russeld Posted November 15, 2012 Share Posted November 15, 2012 hi nice module! just want to ask how to configure static ip on client mode Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted November 17, 2012 Author Share Posted November 17, 2012 Not possible for the moment with the module. I may add it in the future ;) Quote Link to comment Share on other sites More sharing options...
sickduck Posted November 18, 2012 Share Posted November 18, 2012 (edited) I'm using firmware 2.70 and the latest version of Network Manager. I am using the USB Wifi from the Hak Store. I am running the pineapple off of a 1Ah battery and the USB hub off of a 2Ah battery. The module does not bring my wlan1 up. I have to manually issue the command ifconfig wlan1 up. I go into Network manager and change my settings to connect to an AP. I click save, then commit. When I click commit I get this and wlan1 goes down. Any ideas? Network Managerradio0 wlan0 enabledradio1 - enabled[/CODE] Edited November 18, 2012 by sickduck Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 19, 2012 Share Posted November 19, 2012 Install the Reaver module. Go there to enable your second device and come back to the Network Manager page. Just saves you the typing... Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted November 19, 2012 Author Share Posted November 19, 2012 (edited) Due to a high demand on this feature, version 1.5 is now out and offers the possibility to control as well logical interfaces :) Edited November 19, 2012 by Whistle Master Quote Link to comment Share on other sites More sharing options...
thesugarat Posted November 20, 2012 Share Posted November 20, 2012 You are all kinds of awesome! Quote Link to comment Share on other sites More sharing options...
loozr Posted November 20, 2012 Share Posted November 20, 2012 Superb Whistle Master! B) Quote Link to comment Share on other sites More sharing options...
Ryo Posted November 21, 2012 Share Posted November 21, 2012 (edited) I have a hard time getting this to work. I am Using the newest firmware and I have connected my awus036h to my pineapple.. But it doesnt detect any signals. Do I have to do some configurations first? I have just started using Linux so its all very much new to me. Edit: I want to connect my pineapple to wifi Edited November 21, 2012 by Ryo Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted November 21, 2012 Author Share Posted November 21, 2012 It happens some time. Try to Disable and Enable again the logical interface and try to detect again some APs. Quote Link to comment Share on other sites More sharing options...
HoodooTheGreat Posted December 2, 2012 Share Posted December 2, 2012 Has anybody figured out how to change the Mac address of the network manager. I can ssh into the pineapple and change the Mac address, however the changes don't go into affect due to the network manager over ride Is there a way to change it? Quote Link to comment Share on other sites More sharing options...
NullNull Posted December 2, 2012 Share Posted December 2, 2012 It's very possible to be in the next version which will be released very soon as seb mentioned :) Quote Link to comment Share on other sites More sharing options...
HoodooTheGreat Posted December 3, 2012 Share Posted December 3, 2012 It's very possible to be in the next version which will be released very soon as seb mentioned :) thanks Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted December 5, 2012 Author Share Posted December 5, 2012 (edited) It should not override the mac address I will have a lookt at it. EDIT: You're right, as the mac address is also defined in the /etc/config/wireless, even if you change it with macchanger, it won't update the config file. Anyway, this gave me the idea to add the possibility to change the mac address from the module, I'll add the feature ;) Edited December 5, 2012 by Whistle Master Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted December 6, 2012 Author Share Posted December 6, 2012 New version 1.6 is out, with ability to change randomly mac address ;) Quote Link to comment Share on other sites More sharing options...
JMBro Posted December 8, 2012 Share Posted December 8, 2012 Woops, I was having trouble changing SSIDs and I clicked (I believe) REMOVE CONFIGURATION or something like that, and now, for the Wireless TAB there is nothing. Is there any way to get it back? I tried uninstalling it and re-installing and no go. I currently have firmware 2.4.1 Any help you can give would be GREATLY appreciated. thanks. Quote Link to comment Share on other sites More sharing options...
stealthkit Posted December 8, 2012 Share Posted December 8, 2012 Woops, I was having trouble changing SSIDs and I clicked (I believe) REMOVE CONFIGURATION or something like that, and now, for the Wireless TAB there is nothing. Is there any way to get it back? I tried uninstalling it and re-installing and no go. I currently have firmware 2.4.1 Any help you can give would be GREATLY appreciated. thanks. I would recommend you update to 2.7 and then you will get your wireless tab back. FYI the login url is for 2.7.0 "http://172.42.16.1:1471". Also remember to read the release notes ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.