Echelon7 Posted July 12, 2012 Share Posted July 12, 2012 Just upgraded to firmware version 2.3.1 from 1.0.1 and I noticed the Reaver binary is no longer present. Just curious as to why it wasn't included, or am I missing something? Thanks! Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted July 12, 2012 Share Posted July 12, 2012 2.4.1 is the most current version http://cloud.wifipineapple.com/index.php?downloads Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted July 12, 2012 Share Posted July 12, 2012 As reaver is currently not working properly on OpenWRT, reaver has been taken out of the firmware. We are hopeful to get this working very soon though! Best, Sebkinne Quote Link to comment Share on other sites More sharing options...
Echelon7 Posted July 17, 2012 Author Share Posted July 17, 2012 Thanks Sebkinne. Quote Link to comment Share on other sites More sharing options...
PineDominator Posted July 17, 2012 Share Posted July 17, 2012 (edited) OK so I got reaver to work on the MK4! 1. install reaver through the opkg package manager, It was just recently added opkg update; opkg install reaver 2. make sure karma is not running and issue ifconfig wlan0 down; ifconfig mon.wlan0 down; ifconfig wlan0 up; airmon-ng start wlan0 3. airodump-ng mon0 and find your bssid of the station to test, remember to test your own equipment 4. reaver -i mon0 -b 00:00:00:00:00:00 -vv and reaver should now channel hop and brute force keys:-D EDIT: the alfa NHA works but using just the ac adapter powering the pineapple was not enough, would get to the channel then hang and reset the adapter, using my astro 3 battery works great Edited July 17, 2012 by petertfm Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted July 17, 2012 Share Posted July 17, 2012 OK so I got reaver to work on the MK4! 1. install reaver through the opkg package manager, It was just recently added opkg update; opkg install reaver 2. make sure karma is not running and issue ifconfig wlan0 down; ifconfig mon.wlan0 down; ifconfig wlan0 up; airmon-ng start wlan0 3. airodump-ng mon0 and find your bssid of the station to test, remember to test your own equipment 4. reaver -i mon0 -b 00:00:00:00:00:00 -vv and reaver should now channel hop and brute force keys:-D EDIT: the alfa NHA works but using just the ac adapter powering the pineapple was not enough, would get to the channel then hang and reset the adapter, using my astro 3 battery works great Yup, Reaver is now officially supported in OpenWRT. (Since 44 hours actually) Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
condor Posted July 17, 2012 Share Posted July 17, 2012 ok, the 2 of you know WAY more than I so please advise; When using a 3g modem w/ sdCard, how do I get opkg to do its magic? it wants to work with the 'usb' directory, but with a sdcard there is not a 'usb' directory, it's /mnt/sdb1;2;sdc1;2 etc, etc here is the error message from opkg: Collected errors: * make_directory: Cannot create directory `/usb//usr': Read-only file system. * make_directory: Cannot create directory `/usb//usr': Read-only file system. * opkg_conf_write_status_files: Can't open status file /usb//usr/lib/opkg/status: No such file or directory. I'll dig around, perhaps there is some elusive opkg_config file I'll happen upon. But I would really appreciate any guidance. Thanx, I love this thing... Quote Link to comment Share on other sites More sharing options...
Anton Posted July 18, 2012 Share Posted July 18, 2012 aww man love you sig lol Quote Link to comment Share on other sites More sharing options...
condor Posted July 18, 2012 Share Posted July 18, 2012 aww man love you sig lol you have any idea how many ppl will connect to a 'spongebob' ssid? Quote Link to comment Share on other sites More sharing options...
abxy007 Posted July 18, 2012 Share Posted July 18, 2012 opkg install reaver Unknown package 'reaver'. Collected errors: * opkg_install_cmd: Cannot install package reaver. root@Pineapple:~# opkg install reaver Unknown package 'reaver'. Collected errors: * opkg_install_cmd: Cannot install package reaver. root@Pineapple:~# Unknown package 'reaver'. -ash: Unknown: not found root@Pineapple:~# Collected errors: -ash: Collected: not found root@Pineapple:~# * opkg_install_cmd: Cannot install package reaver. -ash: *: not found root@Pineapple:~# opkg install reaver Collected errors: * opkg_install_cmd: Cannot install package reaver. root@Pineapple:~# opkg install reaver Unknown package 'reaver'. Collected errors: * opkg_install_cmd: Cannot install package reaver. root@Pineapple:~# Unknown package 'reaver'. -ash: Unknown: not found help? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted July 18, 2012 Share Posted July 18, 2012 Abxy007, Fist of all, run "opkg update". Running the same command over and over won't help ;) Best, Sebkinne Quote Link to comment Share on other sites More sharing options...
abxy007 Posted July 18, 2012 Share Posted July 18, 2012 usually I do ....and for some reason, its working again!!! thanks Seb Quote Link to comment Share on other sites More sharing options...
gamephreaker Posted July 18, 2012 Share Posted July 18, 2012 Does that mean wash is working now? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted July 18, 2012 Share Posted July 18, 2012 usually I do ....and for some reason, its working again!!! thanks Seb Glad you got it working! Does that mean wash is working now? Yes, wash should work as intended. Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
unitex Posted July 18, 2012 Share Posted July 18, 2012 Could someone make an ipk package for the mk3. And I cant seem to find reaver package in backfire rc6. Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted July 19, 2012 Share Posted July 19, 2012 Could someone make an ipk package for the mk3. And I cant seem to find reaver package in backfire rc6. I can later today. Quote Link to comment Share on other sites More sharing options...
unitex Posted July 20, 2012 Share Posted July 20, 2012 (edited) that would be great :) if you could just post the link or send me an email with an attachement. Edited July 20, 2012 by unitex Quote Link to comment Share on other sites More sharing options...
techsavvy34 Posted August 7, 2012 Share Posted August 7, 2012 (edited) Now that reaver is working will it be implemented in the gui in upcoming firmware or is someone going to make a module for it? Edited August 7, 2012 by techsavvy34 Quote Link to comment Share on other sites More sharing options...
carmichaeldylan Posted August 10, 2012 Share Posted August 10, 2012 I got reaver to work with the NHA with a shorter cord then what it came with. works great! :) Quote Link to comment Share on other sites More sharing options...
mex.mustermann Posted August 10, 2012 Share Posted August 10, 2012 Can somebody upload reaver.ipk for the mark3 again?? thx! Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted August 11, 2012 Share Posted August 11, 2012 Can somebody upload reaver.ipk for the mark3 again?? thx! Simply use opkg: opkg update opkg install reaver Best Regards, Sebkinne Quote Link to comment Share on other sites More sharing options...
techsavvy34 Posted September 2, 2012 Share Posted September 2, 2012 Is anyone one making a reaver gui module not that reaver works? Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted September 2, 2012 Share Posted September 2, 2012 This one is on my TODO list of modules. ;) Quote Link to comment Share on other sites More sharing options...
loozr Posted September 2, 2012 Share Posted September 2, 2012 This one is on my TODO list of modules. ;) Like there are no modules by Whistle Master already? ;) Looking forward to it! :) Quote Link to comment Share on other sites More sharing options...
--nick-- Posted December 5, 2012 Share Posted December 5, 2012 about when will the reaver gui be working please? because it still just only displays a message saying reaver is not installed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.