phlewpy Posted May 6, 2012 Share Posted May 6, 2012 Hi Guys, Just got my MK4 a few days ago. I have set it up with version 2.0. and made it route to the Internet via my Laptop. Routing works just fine. I have started Karma. I was able to manually add a wireless AP RandomNonExisten3876 and connect to it on my Android smarthone. The Pineapple answered 'Ja' and the smartphone routed it's data via the Pineapple. However: 1) I'm unable to find any clients that would connect to my pineapple. This is very strange - I'm located in a very Wifi dense place (More then 10 APs around me). Any ideas o n what's going on? 2) When I connected via ssh and run airodump-ng -i mon.wlan0 i see that the pineapple is locked on channel 11 and not doing any channel hopping. So i'm thinking maybe the channel lock causes my pineapple not to pick up client requests? What do you think? P. Quote Link to comment Share on other sites More sharing options...
PineDominator Posted May 6, 2012 Share Posted May 6, 2012 Hi Guys, Just got my MK4 a few days ago. I have set it up with version 2.0. and made it route to the Internet via my Laptop. Routing works just fine. I have started Karma. I was able to manually add a wireless AP RandomNonExisten3876 and connect to it on my Android smarthone. The Pineapple answered 'Ja' and the smartphone routed it's data via the Pineapple. However: 1) I'm unable to find any clients that would connect to my pineapple. This is very strange - I'm located in a very Wifi dense place (More then 10 APs around me). Any ideas o n what's going on? 2) When I connected via ssh and run airodump-ng -i mon.wlan0 i see that the pineapple is locked on channel 11 and not doing any channel hopping. So i'm thinking maybe the channel lock causes my pineapple not to pick up client requests? What do you think? P. Have you connected to 172.16.42.1/pineapple ? and turned on karma? the feature that is the special sauce. channel hopping is a known thing to change channels you have to bring down the interface and back up but when you do that karma and wifi will most likely not be functioning anymore. I am waiting until someone figures how to get a usb wifi card working on the pineapple:-) Quote Link to comment Share on other sites More sharing options...
vince2015 Posted May 6, 2012 Share Posted May 6, 2012 Everytime I connect to my pineapple and have karma and dns spoff going and then try to connect to gooogle i get this.. http://www.google.com/redirect.php does anyone know how to fix this ? Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted May 6, 2012 Share Posted May 6, 2012 Everytime I connect to my pineapple and have karma and dns spoff going and then try to connect to gooogle i get this.. http://www.google.com/redirect.php does anyone know how to fix this ? Well... this is the normal usage of dnsspoof and karma :P All the traffic is redirect to the landing page. Quote Link to comment Share on other sites More sharing options...
phlewpy Posted May 6, 2012 Author Share Posted May 6, 2012 Have you connected to 172.16.42.1/pineapple ? and turned on karma? the feature that is the special sauce. Sure. channel hopping is a known thing to change channels you have to bring down the interface and back up but when you do that karma and wifi will most likely not be functioning anymore. Is the channel hopping what's stopping Karma from working? How do I fix it exactly? I am waiting until someone figures how to get a usb wifi card working on the pineapple:-) It's kind disappointing you need a usb wifi card on pineapple, the whole idea is to have small evil packed box :) Quote Link to comment Share on other sites More sharing options...
Technoprenerd Posted May 6, 2012 Share Posted May 6, 2012 Got an offtopic question (sorry though, tried so hard to figure it out on my own!) My question is the following; By using macchanger -r wlan0/mon.wlan0 I can change the MAC adress. (First needing to put the interfaces down, ifconfig wlan0/mon.wlan0 down). However this doesn't work with KARMA on. Any idea's>? And can I use a startup script that will change the MAC adress randomly on each startup>? Quote Link to comment Share on other sites More sharing options...
PineDominator Posted May 6, 2012 Share Posted May 6, 2012 Sure. Is the channel hopping what's stopping Karma from working? How do I fix it exactly? It's kind disappointing you need a usb wifi card on pineapple, the whole idea is to have small evil packed box :) the pineapple is a great package it does a great job, but if you need stuff like deauthing for now we have to use external methods having a usb wifi adapter would be a great addition thing is if we start scanning and deauthing that would take time from karma and might have bad results. I would try going to a new location to test the pineapple like a cafe. a reflash can sometimes help In my opinion the newest karma is programmed into hostapd the way it is implemented may be why this channel thing is happening. give it another shot:-) Quote Link to comment Share on other sites More sharing options...
phlewpy Posted May 6, 2012 Author Share Posted May 6, 2012 I went to another location today. Again no luck. Do you think that the channel hopping issues is related? How do I resolve it? iwconfig: wlan0 IEEE 802.11bgn Mode:Master Frequency:2.462 GHz Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on mon.wlan0 IEEE 802.11bgn Mode:Monitor Frequency:2.462 GHz Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on airmon-ng root@Pineapple:~# airmon-ng Interface Chipset Driver wlan0 Atheros ath9k - [phy0] mon.wlan0 Atheros ath9k - [phy0] IEEE Unknown Unknown (MONITOR MODE NOT SUPPORTED) 802.11bgn Unknown Unknown (MONITOR MODE NOT SUPPORTED) Mode:Monitor Unknown Unknown (MONITOR MODE NOT SUPPORTED) Frequency:2.462 Unknown Unknown (MONITOR MODE NOT SUPPORTED) GHz Unknown Unknown (MONITOR MODE NOT SUPPORTED) Tx-Power=18 Unknown Unknown (MONITOR MODE NOT SUPPORTED) dBm Unknown Unknown (MONITOR MODE NOT SUPPORTED) Ideas? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted May 6, 2012 Share Posted May 6, 2012 I went to another location today. Again no luck. Do you think that the channel hopping issues is related? How do I resolve it? iwconfig: wlan0 IEEE 802.11bgn Mode:Master Frequency:2.462 GHz Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on mon.wlan0 IEEE 802.11bgn Mode:Monitor Frequency:2.462 GHz Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on airmon-ng root@Pineapple:~# airmon-ng Interface Chipset Driver wlan0 Atheros ath9k - [phy0] mon.wlan0 Atheros ath9k - [phy0] IEEE Unknown Unknown (MONITOR MODE NOT SUPPORTED) 802.11bgn Unknown Unknown (MONITOR MODE NOT SUPPORTED) Mode:Monitor Unknown Unknown (MONITOR MODE NOT SUPPORTED) Frequency:2.462 Unknown Unknown (MONITOR MODE NOT SUPPORTED) GHz Unknown Unknown (MONITOR MODE NOT SUPPORTED) Tx-Power=18 Unknown Unknown (MONITOR MODE NOT SUPPORTED) dBm Unknown Unknown (MONITOR MODE NOT SUPPORTED) Ideas? The pineapple has no need to channel hop for Karma to work. Actually, hopping channels would kick clients connected. You can change the channel from 11 to anything else by editing /etc/config/wireless Beware, editing these settings has caused people soft bricks. Best, Sebkinne Quote Link to comment Share on other sites More sharing options...
phlewpy Posted May 6, 2012 Author Share Posted May 6, 2012 If channel hopping is not the issue what else may be the reason for me not to be able to steal any clients?? And why won't airodump-ng hop channels? Is there something wrong with my wifi chip? Quote Link to comment Share on other sites More sharing options...
phlewpy Posted May 7, 2012 Author Share Posted May 7, 2012 Ok so I decided to run hostapd manually to better understand whats actually going on. hostapd -dd -t -K /etc/hostapd/karma.conf.old The /etc/hostapd/karma.conf.old looks like: # config file to use with the Karma'd version of hostapd # created by Robin Wood - robin@digininja.org - www.digininja.org # This file is currently outdated but may become useful in the future interface=wlan0 driver=nl80211 ssid=internet channel=1 hw_mode=g # both open and shared auth auth_algs=3 # no SSID cloaking ignore_broadcast_ssid=0 logger_syslog=-1 logger_stdout=-1 logger_syslog_level=3 logger_stdout_level=3 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=0 # 0 = accept unless in deny list macaddr_acl=0 # only used if you want to do filter by MAC address #accept_mac_file=/etc/hostapd/hostapd.accept #deny_mac_file=/etc/hostapd/hostapd.deny # enable karma enable_karma=1 So now I can see that Pineapple actually sees a lot of probes: 1336372606.882698: KARMA CTRL_IFACE Requested ESSID is PTC_Wifi 1336372606.882747: KARMA: Probe Request from 40:30:04:15:10:04 for SSID 'PTC_Wifi' 1336372606.882938: KARMA ssid malloc'd so free it 1336372606.884085: KARMA CTRL_IFACE Karam is enabled for handling probe request 1336372606.884192: KARMA CTRL_IFACE Requested ESSID is Bezeq-n_512A 1336372606.884247: KARMA: Probe Request from 40:30:04:15:10:04 for SSID 'Bezeq-n_512A' 1336372606.884459: KARMA ssid malloc'd so free it 1336372606.885472: KARMA CTRL_IFACE Karam is enabled for handling probe request 1336372606.885577: KARMA CTRL_IFACE Requested ESSID is Helix 1336372606.885627: KARMA: Probe Request from 40:30:04:15:10:04 for SSID 'Helix' 1336372606.885988: KARMA ssid malloc'd so free it 1336372606.886355: KARMA CTRL_IFACE Karam is enabled for handling probe request 1336372606.886421: KARMA CTRL_IFACE Requested ESSID is Aroma.co.il 1336372606.886470: KARMA: Probe Request from 40:30:04:15:10:04 for SSID 'Aroma.co.il' 1336372606.886659: KARMA ssid malloc'd so free it 1336372606.887549: KARMA CTRL_IFACE Karam is enabled for handling probe request However none of those clients is connected to the Pineapple. How do I know that answers are actually sent?? Where do I get the source of hostapd with karma module? Quote Link to comment Share on other sites More sharing options...
Whistle Master Posted May 7, 2012 Share Posted May 7, 2012 Your setup seems to be working as expected though. Have a look at those threads (1) and (2). Moreover, if you can connect with your android phone, your setup should be fine. You should see the connected clients on the status page normally and your android phone also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.