Jump to content

1st Time Trying The Rick Roll On Mark3


Mother
 Share

Recommended Posts

So I am trying to my first attempt at rick rolling but not having much luck.

What I have done...

I gave downloaded the package from http://www.wifipineapple.com/doku.php?id=rickrolling and followed the instructions. I move the 3 files into the www directory on the pineapple. When I connect a device to the pineapple and go to a web page I get either a blank screen or a message saying "No such file or directory"

Any assistance?

Thanks

Link to comment
Share on other sites

Regarding your "No such file or directory" problem, it comes from the wiki. I think the problem is that the quotes in your landing page configuration are not the correct ones (” vs ")

Try to replace your landing page configuration with the following (with correct ones):

<html>
<head>
<meta http-equiv="REFRESH" content="0;url=index.html">
</head>
<body>
</body>
</html>

Link to comment
Share on other sites

Regarding your "No such file or directory" problem, it comes from the wiki. I think the problem is that the quotes in your landing page configuration are not the correct ones (" vs ")

Try to replace your landing page configuration with the following (with correct ones):

<html>
<head>
<meta http-equiv="REFRESH" content="0;url=index.html">
</head>
<body>
</body>
</html>

Thanks I will give that a try and let you know.

Link to comment
Share on other sites

Hahahahahahahaha!!! That's awesome!

2012-03-02_21-43-05_645.jpg

Though if the link goes any deeper than the .com or whatever it won't work. If I browse to www.mp3car.com/vbulletin/ it fails with "No such file or directory"

Dont quote me on this but in the DNS filtering file try add */* meaning any subdomain of any site. I didnt actually try it but it makes enough to sense to work

Link to comment
Share on other sites

Dont quote me on this but in the DNS filtering file try add */* meaning any subdomain of any site. I didnt actually try it but it makes enough to sense to work

I just gave that a try and it didn't work. It made sense though...

I also cant get it to rickroll with https. I ran across that because I use "https everywhere" in Firefox.

Link to comment
Share on other sites

Don't mean to hijack your thread, but was hoping someone might be able to help.

I tried to do this on my MK4 v1.0.1 and going through the steps HERE. I thought I did everything in order without errors, but I'm not sure where I went wrong.

While doing that instead of using 192.168.1.1, I used 172.16.42.1 since that's the default gateway for the pineapple. anyway after it rebooted it will not broadcast wifi, ipconfig reveals that it's default gateway is now 192.168.1.1, going to this ip results in a timeout err. I am able to WinSCP and PuTTY without any problems via Ethernet cord. My question is what do I need to do now? I am a noob so please feel free to talk as dumbed-down as possible.

Could the solution be as simple as pressing the WPS button or Reset on the back?

Link to comment
Share on other sites

Don't mean to hijack your thread, but was hoping someone might be able to help.

I tried to do this on my MK4 v1.0.1 and going through the steps HERE. I thought I did everything in order without errors, but I'm not sure where I went wrong.

While doing that instead of using 192.168.1.1, I used 172.16.42.1 since that's the default gateway for the pineapple. anyway after it rebooted it will not broadcast wifi, ipconfig reveals that it's default gateway is now 192.168.1.1, going to this ip results in a timeout err. I am able to WinSCP and PuTTY without any problems via Ethernet cord. My question is what do I need to do now? I am a noob so please feel free to talk as dumbed-down as possible.

Could the solution be as simple as pressing the WPS button or Reset on the back?

To reset hold the reset button for 5-10 second. Then let go. Count to 6 and let go I would suggest.

It will restore and reboot.

Do not replace any config files.

Best,

Sebkinne

Link to comment
Share on other sites

To reset hold the reset button for 5-10 second. Then let go. Count to 6 and let go I would suggest.

It will restore and reboot.

Do not replace any config files.

Best,

Sebkinne

Thank you! I'm back to the default. I'm very new to all this, I didn't quite follow what the wiki was saying so I tried to follow the other tutorial referenced in the wiki since it looked very noob-friendly.

Thanks for the quick replies,

Cory

Link to comment
Share on other sites

Alright, I followed the wiki and managed to get it working. One problem; when using google chrome I hear the music playing, but have a blue screen without text. If I use IE it works flawlessly and i get the picture(ASCII text) and audio. I see that Barry has it working on chrome in the pictures above though.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...