Graham Posted February 23, 2012 Share Posted February 23, 2012 I'm a programmer and a Hak5 fan, so I picked up a Rubber Ducky, thinking about all the cool and hilarious stuff I could do. One problem, though. I've never in my life had to work with microSD (or SD) cards before. No no, before you say anything, I know what they are and I knew the ducky used one. I have a reader and all that stuff. The only problem is, I can't for the life of me figure out how to get the microSD card out of the ducky. I assume it doesn't just slide out, as pulling lightly does nothing. I thought I saw Darren open up the microSD slot in a video, but I don't see how to do that. Any help would be greatly appreciated, with as little mocking as possible :P Link to comment Share on other sites More sharing options...
Graham Posted February 23, 2012 Author Share Posted February 23, 2012 After reading the FAQ (like I should have to begin with), I learned that the microSD card does apparently slide out. It's someone difficult to get at it. I'll try what the FAQ suggests, but it sure is in there. Link to comment Share on other sites More sharing options...
Graham Posted February 23, 2012 Author Share Posted February 23, 2012 Okay, got it out. I'm almost surprised the ducky still works after what I put it through. No need for anyone to reply. This thread should be closed. I apologize for these waste-of-time posts. Link to comment Share on other sites More sharing options...
Recommended Posts