Jump to content

Proxmox Ve V1.8 Installation Hangs

Dark Jester

Recommended Posts

I'm having a problem installing Proxmox VE.

Here is the iso:

• proxmox-ve_1.8-5754-4.iso

I have verified the MD5sum is correct.

My hardware is:

ASUS P7P55 LX LGA 1156 Intel P55 ATX Intel Motherboard

3ware 9650SE-4LPML PCI Express Lanes: 4 SATA II Controller Card RAID Levels 0, 1, 5, 10, Single Disk, JBOD, KIT

KINGWIN KF-4000-BK 3.5" Internal hot swap rack raid-4 bay

Intel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor BX80605I5750

HITACHI Deskstar HD32000 IDK/7K (0S00164) 2TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive x4

G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL

The four (4) HDD are setup into a RAID-5 array. When I load from the DVD I get to the initial splash image, hit return to start the installation and then the following gets posted on the screen:


ACPI: I/O resource 0000:00:1f.3 [0x4000-0x41f] conflicts with ACPI region SMRG [0x400-0x41f]

searching for cdrom

testing again in 5 seconds

testing again in 5 seconds

testing cdrom /dev/sr0

found proxmox cdrom

Starting Proxmox installation

Installing additional hardware drivers

Starting the hotplig events dispatcher: udevd.

Synthesizing the initial hotplug events...done.

Waiting for /dev to be fully populated...


It is at this point that the installation hangs. Any help would be very appreciated.

Link to comment
Share on other sites

"ACPI: I/O resource 0000:00:1f.3 [0x4000-0x41f] conflicts with ACPI region SMRG [0x400-0x41f]"

Sounds like something is not configured properly at the raid level.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...