Rodio Posted July 9, 2009 Share Posted July 9, 2009 Hi, I got Jasager v2 working, configured everything like all explained in the tutorials. I even took my other computer, connected to OpenWRT and could be able go to the internet. I shut-down my fonera and laptops. The day after, I try again and clients cannot go to the internet. What is working My fon comes up with IP 192.168.0.250 (static IP) Jasager webpage is up and running My internet connection is shared and the other NIC has IP 192.168.0.1/24 and my ISP's DNS. My other laptop connects to openwrt and gets an IP address from 192.168.0.125 This shows it on Jasager webpage What is not working The client cannot go to the internet It has the DNS adress as FON's IP address (192.168.0.250) - is this normal? How can I troubleshoo it further? It was working yesterday but today it is not. Did someone ever experience this issue? Thank you Quote Link to comment Share on other sites More sharing options...
digininja Posted July 9, 2009 Share Posted July 9, 2009 check things can ping each other, fon to default gw, client to fon etc. Check the default gateway that is being given out on a client and make sure it is correct. Check there isn't another dhcp server giving out conflicting info. Do things with IP not with hostname, that would eliminate DNS issue. Quote Link to comment Share on other sites More sharing options...
netman Posted July 26, 2009 Share Posted July 26, 2009 I think that I have this same problem. I tried getting to yahoo.com by name and ip as you suggested with no luck. So what do you think I should try as I'm getting the page cannot be displayed. Thanks, -Mike Quote Link to comment Share on other sites More sharing options...
digininja Posted July 26, 2009 Share Posted July 26, 2009 ssh to the fon and check its ip address, make sure that it is one you would expect it to have, e.g. it is on your subnet and not conflicting. Does it have the correct default gateway and can you ping other machines on the same subnet? Quote Link to comment Share on other sites More sharing options...
netman Posted July 27, 2009 Share Posted July 27, 2009 Hello digininja, I got it wokring by directly connecting it. Now I need to see what it will do. From the fon to default GW. then client to fon. Now the client is the mark (correct)? I can ping the mark from another client on the same subnet. Thanks, -Mike Quote Link to comment Share on other sites More sharing options...
digininja Posted July 27, 2009 Share Posted July 27, 2009 I'm not sure what you question in that reply means but I'm glad you got it working. Quote Link to comment Share on other sites More sharing options...
netman Posted July 29, 2009 Share Posted July 29, 2009 HI digininja, Sorry for the bad english. What I wanted to know is now that I got it working on my local lan, how do I get to the next step in testing the fon. Because on my local lan, I'm not using ICS, because it is connected to my wired router. I know with ICS, I'd try using the hamster, maybe I can use it locally too. I just help getting to the next step in my training process. Any information would be great. Thanks, -Mike Quote Link to comment Share on other sites More sharing options...
digininja Posted July 29, 2009 Share Posted July 29, 2009 two options, either plug it into a second NIC on one of your other machines then do standard ICS so you can run your tools on that one machine Setup the Fon to use one of your machines as a default gateway rather than the real one, that way the fon sends all traffic through the machine where you can do whatever you want to it. Quote Link to comment Share on other sites More sharing options...
Nightcraw1er Posted September 6, 2009 Share Posted September 6, 2009 do i suppose to connect to my home wireless network and then create an ics with the fon or the other way around? if i connect to the fon then i cannot get internet & if i connect to my home network then i cannot get jasager interface Quote Link to comment Share on other sites More sharing options...
Nightcraw1er Posted September 6, 2009 Share Posted September 6, 2009 also i would to if my network setting are right : in Openwrt under -Network -DHCP, my lan DHCP is turn on with the setting of Start 100,Limit 150, and Lease Time 720 but my wlan DHCP is turn off. should i turn it on? Quote Link to comment Share on other sites More sharing options...
Nightcraw1er Posted September 6, 2009 Share Posted September 6, 2009 one more thing -- can you tell how blacklist & whitelist works Quote Link to comment Share on other sites More sharing options...
digininja Posted September 6, 2009 Share Posted September 6, 2009 one more thing -- can you tell how blacklist & whitelist works At the moment it might not work as all, I'm going to check it. The idea is to say either only reply to this list of ESSID's or ignore this list. The first is white list, the second black list. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.