Search the Community
Showing results for tags 'whydoiwritethesetags'.
Hi, So while digging around the NANO I discovered two LED devices labelled "ath9k-phy0" and "ath9k_htc-phy1". The first one isn't too interesting, but the latter, "ath9k_htc-phy1" is the device entry for a green LED on the NANO. Go ahead and look through the cutout for the female USB port, you should see it lit up. I think these LEDs were left in by accident by the manufacturer for the second radio. And while it is pretty useless because you can't see the LED easily, you can control it. If you'd like to mess with it, I recommend reading this and experimenting with different triggers. To enable a simple blinking of the LED, edit "/etc/config/system" and place the following underneath the existing led config block. config led option name 'wlan1' option sysfs 'ath9k_htc-phy1' option trigger 'timer' option delayon '5000' option delayoff '2000' Your config should then look a little like this: config system option hostname Pineapple option timezone UTC config led option name 'wlan0' option sysfs 'pineapple:blue:system' option trigger 'netdev' option dev 'wlan0' option mode 'link tx rx' config led option name 'wlan1' option sysfs 'ath9k_htc-phy1' option trigger 'timer' option delayon '5000' option delayoff '2000' config 'timeserver' 'ntp' list 'server' '0.openwrt.pool.ntp.org' list 'server' '1.openwrt.pool.ntp.org' list 'server' '2.openwrt.pool.ntp.org' list 'server' '3.openwrt.pool.ntp.org' option enable_server 0 -Foxtrot