Search the Community

Hi, im currently running the 2.6.2 release on the Pineapple Nano, and im trying to configure the RT5370 (MT7601U) wireless adapter (the one recommended for the Nano at the Hak5 website) with no luck. The adapter get recognized by the Nano but the wlan2 interface does not appear. I tried updating the dirvers via opkg, but thay are all up to date. If someone knows how to solve it that would be great. lsusb: Bus 001 Device 006: ID 05e3:0745 Genesys Logic, Inc. Logilink CR0012 Bus 001 Device 003: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n Bus 001 Device 005: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg: root@Pineapple:~# dmesg [ 0.000000] Linux version 4.14.134 (@3ccea3e2262a) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0+10576-1cdacaeef9)) #0 Tue Oct 8 15:43:00 2019 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 804fc300, node_mem_map 81000020 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x478 with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=WIFI-PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 59264K/65536K available (3656K kernel code, 184K rwdata, 884K rodata, 324K init, 204K bss, 6272K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007887] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.092692] pid_max: default: 32768 minimum: 301 [ 0.097609] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.103928] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114276] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.122671] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.129509] NET: Registered protocol family 16 [ 0.135147] MIPS: machine is Hak5 WiFi Pineapple NANO [ 0.442941] clocksource: Switched to clocksource MIPS [ 0.448052] NET: Registered protocol family 2 [ 0.452160] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.457971] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.464293] TCP: Hash tables configured (established 1024 bind 1024) [ 0.470799] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.476476] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.483046] NET: Registered protocol family 1 [ 0.487013] PCI: CLS 0 bytes, default 32 [ 0.493379] Crashlog allocated RAM at address 0x3f00000 [ 0.498926] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.511470] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.515912] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.537841] io scheduler noop registered [ 0.540309] io scheduler deadline registered (default) [ 0.546009] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.552382] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.561410] console [ttyATH0] enabled [ 0.568195] bootconsole [early0] disabled [ 0.581302] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.586575] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.590957] 5 tp-link partitions found on MTD device spi0.0 [ 0.596253] Creating 5 MTD partitions on "spi0.0": [ 0.600977] 0x000000000000-0x000000020000 : "u-boot" [ 0.607897] 0x000000020000-0x0000001a43b4 : "kernel" [ 0.614575] 0x0000001a43b4-0x000000ff0000 : "rootfs" [ 0.619247] mtd: device 2 (rootfs) set to be root filesystem [ 0.623871] 1 squashfs-split partitions found on MTD device rootfs [ 0.629912] 0x000000ea0000-0x000000ff0000 : "rootfs_data" [ 0.638399] 0x000000ff0000-0x000001000000 : "art" [ 0.643765] 0x000000020000-0x000000ff0000 : "firmware" [ 0.651681] libphy: Fixed MDIO Bus: probed [ 0.675761] libphy: ag71xx_mdio: probed [ 1.304749] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.313371] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.320538] NET: Registered protocol family 10 [ 1.329021] Segment Routing with IPv6 [ 1.331373] NET: Registered protocol family 17 [ 1.336624] 8021q: 802.1Q VLAN Support v1.8 [ 1.348010] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.356194] Freeing unused kernel memory: 324K [ 1.359176] This architecture does not have kernel memory protection. [ 2.118543] init: Console is alive [ 2.120812] init: - watchdog - [ 2.482953] random: fast init done [ 4.709881] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.965169] usbcore: registered new interface driver usbfs [ 4.969353] usbcore: registered new interface driver hub [ 4.974701] usbcore: registered new device driver usb [ 5.031051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.049732] SCSI subsystem initialized [ 5.059793] ehci-platform: EHCI generic platform driver [ 5.063798] ehci-platform ehci-platform: EHCI Host Controller [ 5.069334] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.079367] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.113007] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.119039] hub 1-0:1.0: USB hub found [ 5.122020] hub 1-0:1.0: 1 port detected [ 5.131129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.137951] ohci-platform: OHCI generic platform driver [ 5.145818] uhci_hcd: USB Universal Host Controller Interface driver [ 5.157459] usbcore: registered new interface driver usb-storage [ 5.163125] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 5.173279] init: - preinit - [ 5.908301] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.230712] hub 1-1:1.0: USB hub found [ 6.243110] hub 1-1:1.0: 4 ports detected [ 6.382708] random: procd: uninitialized urandom read (4 bytes read) [ 6.501945] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.593359] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 6.829868] mount_root: loading kmods from internal overlay [ 6.911050] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 6.924451] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 7.053091] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.085041] jffs2: notice: (400) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (2 unchecked, 4 orphan) and 40 of xref (6 dead, 1 orphan) found. [ 7.099969] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.109628] block: extroot: not configured [ 7.145623] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (2 unchecked, 4 orphan) and 40 of xref (6 dead, 1 orphan) found. [ 7.161037] mount_root: loading kmods from internal overlay [ 7.231494] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.239721] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 7.247466] scsi host0: usb-storage 1-1.2:1.0 [ 7.254842] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 7.353829] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 7.381608] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.390074] block: extroot: not configured [ 7.394582] mount_root: switching to jffs2 overlay [ 7.460652] overlayfs: upper fs does not support tmpfile. [ 7.471156] urandom-seed: Seeding with /etc/urandom.seed [ 7.714127] procd: - early - [ 7.715699] procd: - watchdog - [ 8.381346] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0931 PQ: 0 ANSI: 6 [ 8.552035] procd: - watchdog - [ 8.672890] procd: - ubus - [ 8.675636] sd 0:0:0:0: [sda] 7634944 512-byte logical blocks: (3.91 GB/3.64 GiB) [ 8.694869] sd 0:0:0:0: [sda] Write Protect is off [ 8.698292] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 8.818116] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.835227] random: jshn: uninitialized urandom read (4 bytes read) [ 9.129972] sda: sda1 sda2 [ 9.140262] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.150735] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.272555] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.296329] procd: - init - [ 12.316065] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.353895] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7 [ 12.360014] Backport generated by backports.git v4.19.32-1-0-g1c4f7569 [ 13.097449] ath: EEPROM regdomain: 0x0 [ 13.097463] ath: EEPROM indicates default country code should be used [ 13.097469] ath: doing EEPROM country->regdmn map search [ 13.097488] ath: country maps to regdmn code: 0x3a [ 13.097496] ath: Country alpha2 being used: US [ 13.097502] ath: Regpair used: 0x3a [ 13.112506] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.115611] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 13.208981] urngd: v1.0.0 started. [ 13.230910] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 13.237221] usbcore: registered new interface driver ath9k_htc [ 13.423666] RPC: Registered named UNIX socket transport module. [ 13.428136] RPC: Registered udp transport module. [ 13.432819] RPC: Registered tcp transport module. [ 13.437579] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.597820] usbcore: registered new interface driver mt76x2u [ 13.716492] usbcore: registered new interface driver rt2800usb [ 13.743586] usbcore: registered new interface driver rtl8187 [ 13.848748] usbcore: registered new interface driver rtl8192cu [ 13.853303] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 13.979669] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.049594] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.081803] usbcore: registered new interface driver cdc_acm [ 14.086104] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.097789] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.151481] usbcore: registered new interface driver cdc_wdm [ 14.176680] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.230192] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 14.251590] random: crng init done [ 14.253835] random: 6 urandom warning(s) missed due to ratelimiting [ 14.449940] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 14.454145] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 14.459051] ath: EEPROM regdomain: 0x0 [ 14.459057] ath: EEPROM indicates default country code should be used [ 14.459062] ath: doing EEPROM country->regdmn map search [ 14.459081] ath: country maps to regdmn code: 0x3a [ 14.459088] ath: Country alpha2 being used: US [ 14.459094] ath: Regpair used: 0x3a [ 14.490172] ieee80211 phy1: Atheros AR9271 Rev:1 [ 14.577924] usbcore: registered new interface driver ums-alauda [ 14.592262] usbcore: registered new interface driver ums-cypress [ 14.607745] usbcore: registered new interface driver ums-datafab [ 14.623168] usbcore: registered new interface driver ums-freecom [ 14.645929] usbcore: registered new interface driver ums-isd200 [ 14.654664] usbcore: registered new interface driver ums-jumpshot [ 14.666499] usbcore: registered new interface driver ums-karma [ 14.677010] usbcore: registered new interface driver ums-sddr09 [ 14.687430] usbcore: registered new interface driver ums-sddr55 [ 14.698215] usbcore: registered new interface driver ums-usbat [ 14.793212] xt_time: kernel timezone is -0000 [ 14.801697] usbcore: registered new interface driver asix [ 14.820290] usbcore: registered new interface driver ax88179_178a [ 14.839096] usbcore: registered new interface driver cdc_ether [ 14.888848] PPP generic driver version 2.4.2 [ 14.896217] NET: Registered protocol family 24 [ 14.913699] usbcore: registered new interface driver qmi_wwan [ 14.930210] usbcore: registered new interface driver rndis_host [ 14.946078] usbcore: registered new interface driver sierra_net [ 14.967813] usbcore: registered new interface driver smsc95xx [ 14.986496] kmodloader: done loading kernel modules from /etc/modules.d/* [ 16.244026] usb 1-1.2: USB disconnect, device number 4 [ 16.263920] scsi 0:0:0:0: rejecting I/O to offline device [ 16.267885] scsi 0:0:0:0: [sda] killing request [ 16.274086] scsi 0:0:0:0: [sda] UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 16.280484] scsi 0:0:0:0: [sda] CDB: opcode=0x28 28 00 00 20 00 5e 00 00 40 00 [ 16.287752] print_req_error: I/O error, dev sda, sector 2097246 [ 16.293749] blk_partition_remap: fail for partition 1 [ 16.298613] Buffer I/O error on dev sda1, logical block 28, async page read [ 16.305605] blk_partition_remap: fail for partition 1 [ 16.310590] Buffer I/O error on dev sda1, logical block 29, async page read [ 16.317561] blk_partition_remap: fail for partition 1 [ 16.322569] Buffer I/O error on dev sda1, logical block 30, async page read [ 16.329539] blk_partition_remap: fail for partition 1 [ 16.334567] Buffer I/O error on dev sda1, logical block 31, async page read [ 18.763059] usb 1-1.2: new high-speed USB device number 6 using ehci-platform [ 18.954470] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 19.104458] scsi host0: usb-storage 1-1.2:1.0 [ 20.175238] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0931 PQ: 0 ANSI: 6 [ 20.183359] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.321630] sd 0:0:0:0: [sda] 7634944 512-byte logical blocks: (3.91 GB/3.64 GiB) [ 20.336313] sd 0:0:0:0: [sda] Write Protect is off [ 20.339671] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 20.358078] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 20.391967] sda: sda1 sda2 [ 20.402262] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 34.708872] EXT4-fs (sda1): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1317376)! [ 34.717187] EXT4-fs (sda1): group descriptors corrupted! [ 37.548304] eth0: link up (100Mbps/Full duplex) [ 37.552244] br-lan: port 1(eth0) entered blocking state [ 37.556708] br-lan: port 1(eth0) entered disabled state [ 37.562255] device eth0 entered promiscuous mode [ 37.589658] br-lan: port 1(eth0) entered blocking state [ 37.593528] br-lan: port 1(eth0) entered forwarding state [ 37.599120] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 38.573109] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 42.127271] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 44.458415] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.470853] br-lan: port 2(wlan0) entered blocking state [ 44.474827] br-lan: port 2(wlan0) entered disabled state [ 44.480627] device wlan0 entered promiscuous mode [ 44.504666] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 44.509855] br-lan: port 2(wlan0) entered blocking state [ 44.514972] br-lan: port 2(wlan0) entered forwarding state [ 113.959894] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 116.296863] wlan1: authenticate with e8:de:27:d8:d7:a0 [ 116.492310] wlan1: send auth to e8:de:27:d8:d7:a0 (try 1/3) [ 116.510476] wlan1: authenticated [ 116.523023] wlan1: associate with e8:de:27:d8:d7:a0 (try 1/3) [ 116.531591] wlan1: RX AssocResp from e8:de:27:d8:d7:a0 (capab=0x411 status=0 aid=13) [ 116.545439] wlan1: associated [ 116.569208] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 1254.110526] usb 1-1.3: USB disconnect, device number 5 [ 1258.241912] usb 1-1.3: new high-speed USB device number 7 using ehci-platform

Hey Folks, I recently received my wifi pineapple nano and I'm slowly starting to pick it up! However, when I plug in and try to use the RT5370 adapter that was included from Hak5 (not ebay lol) I do not see wlan2 show up in the Client Wifi. I tried another Alfa adapter that I use for another machine and that did work, i was able to see a wlan2 connection. My question is, do I need to install some sort of drivers for the included RT5370 to work properly? Here is the dmesg I get when I plug it in: [ 72.090000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 72.310000] usb 1-1.3: reset high-speed USB device number 5 using ehci-platform [ 72.430000] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 72.480000] ieee80211 phy2: rt2800_init_eeprom: Error - Invalid RF chipset 0x5572 detected [ 72.490000] ieee80211 phy2: rt2x00lib_probe_dev: Error - Failed to allocate device Thank you so much in advance and let me know if I can supply any more information!