Search the Community

Hi, so I can not get an microSD card to work with the pineapple nano I have tried formatting trough the pineapple to get the exFAT file system, resetting the pineapple, formatting in windows When I try to install a module, I just get the message that I can only install on internal This basically means that my pineapple is a paperweight right now. I have looked at some other forum posts with no luck Now the pineapple can not even format the card, it just says "Formatting SD Card, please wait" for hours

Hi so i have been testing out the pineAP and i just noticed that the pineapple is hosting SSIDs that are not in pool. And i dont even have the module enabled Any thoughts?

HI, I wanted to install an SD card into my Pineapple Nano but after formating it with the web GUI nothing append. I've searched the web to find an answer, tried changing Fstab, rebooting, manually formaing. fdisk -l give me this: Device Boot Start End Blocks Id System /dev/sda2 1 1 8001 83 Linux I don't know what to do. Thanks,

Hi Everyone. I am having issues downloading any dependencies for the Wifi Pineapple Nano. I have rebooted my Pineapple Nano several times (Factory Reset) and have ensured that my SD Card can be seen (I am able to download modules to the SD Card). It will show that it is installing and then go back to the red "Not Installed" Has anyone else encountered this issue? Any luck in remediating this issue? Thanks in advance!

Hi all, im just after buying a nano and setting it up on android as i thought that looked easier. however when i wanted to try it out and get modules i put an sd in it... and nothing happened, no lights flashing, no gui changes... nothing. so i hopped on my windows pc to try see if the card worked and it was fine. i put a .txt file with like one sentence in it on the card and then put that in the nano...nothing again, even after formatting the card in the pineapple the .txt file was there. then i cleaned the sd with diskpart on windows and reformatted it. i then tried again with 4 more d cards of different brands, ages and capacities. still nothing. i then ssh'ed into the pineapple and found that the card did show up there under /dev/sda1, however it gave me a warning saying it needed to be 1024 cylinders and it was 3775. i really dont know what to do and i spent more on shipping than the pineapple itself so i dont really want to have to pay to return it. if anyone has any ideas however small or silly they may sound please post them. also if anyone else who has a pineapple could tell me exaxtly what card worked for them i might try buy one. also sorry for bad typing i dont have time to spell check. :)

I stopped using Pineapple nano a while back, and until then i managed to get myself with it pretty well, but: My question is if it is somehow possible to clone an encrypted AP knowing the password/encryption key beforehand, because: A: Most clients won't autoconnect to anAP that differs on encryption/password to the one that they have saved B: I don't need to crack the password in any way, and the onlye posts I found end up talking about how to brute force a password from pineapple/linux, such as: https://forums.hak5.org/topic/40755-wpa2-encrypted-network-impersonation/ and other related such as https://forums.hak5.org/topic/39098-using-pineapple-to-spoof-wpa2-encrpted-aps/ C: I know it has to match up in SSID, Encryption and password., but my head can't work up how to enter those parameters on the Pineapple wifi (if it is even possible)

Module: Occupineapple Version: 1.5 Features: Manage dependencies Configurable lists (with and without MAC) Live output Change log: 1.5 Bug fixes

I'm trying to configure out an attack on my router... so I set successfully the attack and pineapple create the "free wifi " from wpa2 protected device.... Now I'm trying to use ssltrip to intercept passwords on https... and I connected my device to test this... I start ssltrip but If I go on an https site from my phone trying to access, ssl trip is still freezed on this moment forever and it doesn't work: Why? how can I resolve?

Hi, I use a pinapple nano, with the last firmware. I would like to know how to add a code into the Evil Portal module to obtain a meterpreter session when the "victim" tries to authentificate? Someone could help me? Best regards, Michael

Followed every step from the video https://www.wifipineapple.com/pages/faq#collapse-Four, but had no success in sharing internet connection with clients connected to NANO. Any clues?

Hi everyone, I got my WiFi Pineapple Nano a couple of days ago, and I have started to experiment with it. So far, I am trying to copy what Darren does in this tutorial video, which is basic use as a rogue Access Point with PineAP. I have set up internet connection sharing, and my Pineapple has internet access. Recon is working, and I can see my target Access Point and Client. I have enabled PineAP daemon, and ticked all the boxes in PineAP configuration. I can send deauthorisation commands, and under Logging I am getting multiple Probe Requests from my target machine. However, it won't connect as a client. Both Client Filtering and SSID Filtering lists are empty (both in deny mode). On my dashboard I have 15 SSIDs in Pool, but 0 clients connected. I am using pineapple firmware 1.0.6, host device is Windows 7 64-bit (Google Chrome).

Hi, My MacBook Pro cannot find my newly bought Nano in the wp6.sh script, can anyone pls tell me why? It just keeps searching (.........) and never shows that it finds the device. If i do the same on a Linux machine it works fine. I can easily log in to the web interface on http://172.16.42.1:1471 Subsequent sessions may be quickly connected using saved settings. [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Step 1 of 3: Select Default Gateway Default gateway reported as 192.168.0.1 Use the above reported default gateway? [Y/n]? Y Step 2 of 3: Select Internet Interface Internet interface reported as en0 Use the above reported Internet interface? [Y/n]? Y Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. ................................................... ...................................................

As stated in my title, I can only speak about the Pineapple nano. There seems to be some kind of inherent problem with it. When everything is up and totally running and it is all singing and dancing. You have captured your stations on recon and have placed the chosen ssid and mac addresses in the filter and also fully enbabled the PineApp with all neccesary ticks etc. You then go to deauth the chosen ssid and it comes back with "Please start PineAp and try again"! I have dutifully restarted the PineAp several times, in fact lost count on how many times I attempted this and then went back to the PineAp and refreshed and found that the following had unticked themselves: Capture SSID's to Pool : Beacon Response : Broadcast SSID Pool. These are probably the most important as they get the whole capture thing going for deauth. The first 3 selections dont get disturbed, its the last 3 as listed above. This basically makes the Pineapple Nano useless as you can't do anything with it if it wont deauth the clients that it sees! Have other Pine nano users experienced this (maybe tetra too ) if so please reply. It may be useful to the Hak5 crew to know about this so they can patch a fix in their next update to the nano. With the best will & intentions, cheers Mike

I for my very basic and a foolish question, my apologies!! I have recently started with PineApple Nano and I am very exited about it. I have set up Nano on m Kali machine and it is looking good. However, I am kind of lost here on what should I do next and how to explore it in full. It will be grateful if someone can tell me how to go with nano as a beginner and what features i should explore step by step. Thanks-

Hey guys, i just got my nano elite a few days ago and i was wondering if this is possible. I'd like to experiment with URL rewrite and add a parameter to every website.com’s request every time you try to access www.website.com/folder1/ it will redirect to www.website.com/folder1/?value=abc123 Basically add ?value=abc123 to every url from a specific domain I'm totally new on this, so, please try to explain like you'll explain to a 6 year old kid Thanks in advance

TL;DR WifiPineapple Nano works 100% if I use my Ethernet cable, but will not connect to the internet using the Wifi adapter on my Laptop. Herewith the steps I have taken: ON WIFI Using HP 9740 Laptop, LAN cable disconnected, eth0 down, on-board Wifi connected to my home AP WifiPineapple Nano disconnected Boot Kali Linux 2016.2 Run wp6.sh, select [G] Default gateway identified as 192.168.1.1, select [Y] Internet interface reported as wlan0, select [Y] Detected WifiPineapple on interface eth1, select [Y} Once the light is solid blue, select [C] Detecting WifiPineapple......found. Browse to http://172.16.42.1:1471 Log into the WifiPineapple successfully Can browse to google.com, and the rest of the internet Load bulletins and Get Modules doesn't work (as per many other reports in this forum) Results of route -n: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan0 ON LAN LAN cable plugged in, wlan0 down, (same network as Wifi) Exactly the same steps as above, except I am offered eth0 as the default gateway EVERYTHING WORKS 100%, including loading bulletins and Get Modules Results of route -n: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 I have attached a full comparison of ifconfig and route -n step by step throughout the process in the hope that someone can shed some light on why it works perfectly with a LAN cable plugged in, but on Wifi I can not get to the Internet from the Nano. All suggestions greatly appreciated. Thanks Void Main() WifiPineappleConfig-LAN.txt WifiPineappleConfig-Wifi-Eth0Down.txt

Can anybody help me with setting up Wifi Pineapple as a rogue wifi of a AP that is protected with WPA2 ? To get devices that were connected to the AP protected with WPA 2 to connect to my wifi pineapple? Thanks !

So this morning, I wanted to try a little experiment. I tethered my pinappe to my Nexus 6 which has both an active wifi connection as well as a 3g Data connection. I then add a fake AP to the pool called "FreeKittens" and started broadcasting it. As expected, i was able to connect to "FreeKittens" from my laptop, but there is no internet connection.. Can someone explain to me what i need to do to allow anyone on "FreeKittens" get the internet from my phone? I also tried it the other way around, connecting the pineapple to my laptop which is ocnnected to the internet via wlan0 and broadcasting "freeKittens" then connecting to FreeKittens from my nexus and and it worked fine.. What am i missing?