Search the Community
Showing results for tags 'msf '.
I wanted to start playing with bashbunny through my Pineapple Tetra. I guess it should be similar for nano but so far didn’t test. Thought I would share my findings in case anyone else was interested. First and simplest of all you can install screen via opkg on your pineapple and connect to a bashbunny in arming mode: - opkg update && opkg install screen screen 115200 /dev/ttyACM0 For a while I tried getting the bashbunny storage to mount but after a bit of poking about I think the kernel needs FAT support as per this bug report before that can happen. Then Lastly I wanted to get network access to the bashbunny and ideally share the tetras internet connection to the bashbunny. WARNING - It might not be 100% correct but this is what I did. Use ECM_ETHERNET as attack method and edit the following files in the pineapples /etc/config: - Edit /etc/config/network to include the below config interface 'usb2' option ifname 'eth2' option proto 'static' option ipaddr '172.16.64.64' option netmask '255.255.255.0' option gateway '172.16.42.42' option dns '126.96.36.199, 188.8.131.52' and Edit /etc/config/firewall to include the below. config zone option name eth2 list network 'eth2' option input ACCEPT option output ACCEPT option forward ACCEPT option masq 1 option mtu_fix 1 config forwarding option src lan option dest eth2 config forwarding option src eth2 option dest lan After a reboot I connected the bashbunny to the pineapple and from the pineapples terminal was able to ssh into the bashbunny at 172.16.64.1, Final test was being able to ping out and apt-get update successfully. Also and maybe more interestingly to some, I was able to run nmap against pineapple clients as I hoped opening up some further "fun" in the future. Hope this helps someone. Cheers all