Search the Community
Showing results for tags 'modem'.
Found 4 results
This is "Modem Manager", a module created to allow connection to the internet via 3G and 4G USB modems. How to use this module: This module currently only works for modems with Serial Interfaces and Abstract Control Modems (ACM). You can read about modems with serial interfaces here. Support for modems with NCM and QMI may be added at a later date. It's hard for me to implement this support without these types of modems, so if you have a QMI modem please feel free to test some configurations and share your experience. You may also need to reboot your pineapple after setting up your modem in the module. This is to allow the 'usbserial' kernel module to be loaded with the correct VID:PID of your modem. Version 1.1 is out.
I upgraded firmware in lanturtle 3g to the latest version and device dosn't recognice modem device. I had to recover to factory firmware. There is no /dev/ttyACM* devices with last firmware. Anyone has similar issue?
I have been using my tetra with openvpn as a travel router. it works great. I recently configured it with a USB modem; the Huawei E8372. It still connects to the VPN and client's traffics is routed via the VPN tunnel. The issue I am having is that the traffic for the pinneaple itself is not being routed via the tunnel. There is my routing table. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.100.1 220.127.116.11 UG 0 0 0 tun0 default 192.168.8.1 0.0.0.0 UG 0 0 0 eth2 Modem's IP 192.168.8.1 255.255.255.255 UGH 0 0 0 eth2 18.104.22.168 192.168.100.1 22.214.171.124 UG 0 0 0 tun0 172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan 192.168.8.0 * 255.255.255.0 U 0 0 0 eth2 192.168.8.1 * 255.255.255.255 UH 0 0 0 eth2 192.168.100.0 * 255.255.255.0 U 0 0 0 tun0 I am not really familiar with routing tables. Thank you for the assistance
While doing some digging for non-serial modem info, I stumbled onto some HUAWEI API info along with SMS examples using CURL. I had to do a couple of minor tweaks to get them to work reliably on my HUAWEI HiLink E3131 and E303 - attached is the result and may or may not be of interest to others. - usage for sendsms & sendsms2 = ./sendsms 0123456789 "text to send" get3sms getsms sendsms sendsms2 session.sh token.sh