Search the Community

Hi, When I want to execute hostapd-wpe on Wifi Pineapple I don't have problems, but when someone connects to the AP, it appears the following error: Using interface wlan1 with hwaddr 00:13:37:a7:11:80 and ssid "AcrylicWiFi-bgn" wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED wlan1: STA 10:b1:f8:ae:c0:4b IEEE 802.11: authenticated wlan1: STA 10:b1:f8:ae:c0:4b IEEE 802.11: associated (aid 1) wlan1: CTRL-EVENT-EAP-STARTED 10:b1:f8:ae:c0:4b wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 wlan1: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25 SSL: TLS processing failed I use default configuration. How can I fix this problem? Thx!

Hello Community, Really impressed with the new enterprise capabilities, but I'm now having some issues and thought I would look for some feedback. I was previously successful in using the GTC downgrade to collect cleartext creds only once. Now for whatever reason, it has stopped working. I've performed a factory reset and reflashed the firmware trying to fix the problem, but I still can't get the cleartext to work again What are the recommended settings for a Tetra to perform this and the MSCHAPv2 attacks?

Hi, I'm trying to set up a wifi access point using an Alfa AWUS036AC Wireless Adapter. My hostapd.conf file is below. I am having three problems with the access point, and I believe they may be related. Any help is appreciated. The three problems: 1. Network capture shuts down in the middle. Error: "network adapter on which the capture was being done is no longer running; the capture has stopped" 2. "Incorrect Password" error when the password is correct 3. Once connected to Mywifi, there is no internet available. Hostapd.conf: #hostapd.conf interface=wlan0 driver=nl80211 ssid=Mywifi channel=1 macaddr_acl=0 accept_mac_file=./allowed_macs logger_syslog=-1 logger_syslog_level=2 wpa=2 wpa_passphrase=password1 wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP

What USB wireless adapter do you recommend for use with Kali Linux, Hostapd, Aircrack-NG, Mana, Karma, FruityWiFi, Ghost Phisher, Wifi HoneyPot, etc? What do you think of the Alfa AWUS051NH or the Alfa AWUS051NH v2?

Hello. I've found that the following commands are equivalent on the pineapple, in that they both initialize karma. "pineapple karma start" and "hostapd_cli -p /var/run/hostapd-phy0 karma_enable" Hostapd_cli also has several other commands to configure karma, such as karma_black, karma_white, karma_mac_white, karma_add_ssid, and others, but not all of them work properly. For example, I was able to successfully switch the ssid and mac filter lists between deny mode and allow mode, but when I tried to use hostapd_cli to add SSIDs and MACs to the black/whitelist so that I could see them via the Karma tab in the PineAP tile, they did not appear. Running the equivalent command via pineapple, "pineapple karma add_ssid," and "pineapple karma add_mac," worked properly and both lists were populated. My question is why running the hostapd_cli command doesn't work when the pineapple command does, especially since if you run the following command: "strings /bin/pineapple," within the output, you can see the same hostapd_cli commands to add SSIDs and MACs. Is the pineapple executable doing something else that I cannot see from parsing the strings output before running the hostapd_cli commands? Does anyone know? Thanks.