Search the Community
Showing results for tags 'green'.
Hi, So while digging around the NANO I discovered two LED devices labelled "ath9k-phy0" and "ath9k_htc-phy1". The first one isn't too interesting, but the latter, "ath9k_htc-phy1" is the device entry for a green LED on the NANO. Go ahead and look through the cutout for the female USB port, you should see it lit up. I think these LEDs were left in by accident by the manufacturer for the second radio. And while it is pretty useless because you can't see the LED easily, you can control it. If you'd like to mess with it, I recommend reading this and experimenting with different triggers. To enable a simple blinking of the LED, edit "/etc/config/system" and place the following underneath the existing led config block. config led option name 'wlan1' option sysfs 'ath9k_htc-phy1' option trigger 'timer' option delayon '5000' option delayoff '2000' Your config should then look a little like this: config system option hostname Pineapple option timezone UTC config led option name 'wlan0' option sysfs 'pineapple:blue:system' option trigger 'netdev' option dev 'wlan0' option mode 'link tx rx' config led option name 'wlan1' option sysfs 'ath9k_htc-phy1' option trigger 'timer' option delayon '5000' option delayoff '2000' config 'timeserver' 'ntp' list 'server' '0.openwrt.pool.ntp.org' list 'server' '1.openwrt.pool.ntp.org' list 'server' '2.openwrt.pool.ntp.org' list 'server' '3.openwrt.pool.ntp.org' option enable_server 0 -Foxtrot
Hello! I have recently bought the basic version of the MK5 Wifi Pineapple. I'm new to The Pineapple and am having some confusion. The Wifi Pineapple works great when plugged into the PSU that came in the kit. When I try to use any other cable and wall adapter the green L.E.D. is dimly lit and it seems to not be getting enough power. I am using an iPad wall adapter and the output is 10w (5v * 2a). I run into the same issue with using a power bank, which is also 10w (5v * 2a port): USB cable and power bank: http://www.amazon.com/gp/product/B00MRD3UE6/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B00304DZ7I/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 Any help would be appreciated. Thank you!
Hi since the upgrade to 2.0.0 i have some strange or diferent combinations in my leds. First i see red led with green led. Next to that i see green led and blue blinking (startup) When the startup finish i have always the blue, orange and green led (blue and orange blink each 4 seconds, or other times like 5 seconds, or 2 seconds, isnt a regular blinking) In the instructions have the solid red in the startup means md5sum mismach, or bad upgraded files... so i decided to flash it: 1. I follow this steps: https://wifipineapple.com/?flashing (yeah, the MD5 hash , its the same) 2. in the first reboot i still see the red led on the startup of the machine with the green led, before the normal combinations leds of the startup. 3. I get the SD and make in my computer a partition to SWAP, and other in EXT4 (maybe bad files on SD) 4. Flash it again, same issue 5. I upgrade to 2.0.2 and still same issue Now i can "use it" (not sure what can be go bad) but i feel that the pineapple go very very very very slow, and always i have 3 leds ON: blue, orange, green. Thanks for read