Search the Community
Showing results for tags 'gpsd'.
Hi everyone, I need to use the pineapple nano to generate a heat map with google earth (or google map) of the signal strenght. Here is what I have done until now: 1. install kismet, gpsd and share gps (android) 2. send the gps data to gpsd and bind kismet with gpsd to get the gps data I tried giskimsmet, to generate a .kml file to import in google earth and see the access point. This is working. Now the heatmap! I tried kisheat (https://github.com/roobixx/kisheat) , but it failed (the image generated are too small and doesn't represent the real spec). I know there is some paid software that can do that, but I want to use the pineapple to do that. Any idea? :)
I plan on using a Raspberry Pi 2 running Raspian. I want to wardrive wifi and bluetooth at the same time also while using gpsd of course for a rough location on one Raspberry Pi. I will be using an Alfa w/ external antenna and an Ubertooth w/ external antenna. Now for some questions... 1. Will I need to run (2) instances of Kismet, or can it be done is (1) instance, keeping in mind the Ubertooth needs to run a plug-in? 2. If I need to run (2) instances of Kismet, will I need to use (2) separate config files, and/or two installations of Kismet in differing locations? 3. I'm assuming gpsd can feed GPS coordinates to both the wifi and bluetooth scanning? 4. Offer any insight to some problems you think I might run into, or recommandations on the best way to accomplish this, or even perhaps a better way? Any feedback would be much appreciated..Thanks
So, I want to install the USB packages: root@pineapple:# opkg --dest usb install tmux gpsd gpsd-clients root@pineapple:# opkg install kernel kmod-usb-serial-pl2303 It gives me errors saying it doesn't recognize the command and can't locate the packages when I use "apt-get install". I am a beginner at wireless hacking and I'm just starting to use the WiFi pineapple. It would also be nice if someone had read "Hacking Exposed: Wireless Edition", although not neccessary, since that's where I'm getting these instructions from. I'm trying to do this on kali linux 2.0
Hello Guy's last weekend i had the idea to try some war-cycling. and for that i grabbed my mk5 from the shelf and startet scurging the interwebs for information on how to connect a USB GPS dongle to the mk5. this was actualy real easey to do. and i installed the following for testing: Kismet_server and read some where that kismet could directly connect to my USB device. turns out that this is not the case for me. so i installde GPSD and after that kismet found a damn good GPS lock. i decided to run some more tests before i would go on my trip. and found that after starting and stopping Kismet & GPSD a few times the ttyUSB0 dissapears from my /dev folder. now my question is am i the only one having ttyUSB0 disapear on me or are there others on the forum with the same problem. and if so did any one find the reason why or solved it?