Search the Community
Showing results for tags 'darwin'.
Hi...first time user, old Unix hack from long ago...some knowledge... 😉 I am trying to setup my O.MG Cable out of the box, and following the guide here: https://github.com/O-MG/O.MG_Cable-Firmware/wiki I have attempted using each of the three flashers, with same results. It seems like it does not see the USBtoUART device, even though it appears listed in /dev howard@imac /dev % ls -l tty.* crw-rw-rw- 1 root wheel 18, 2 Aug 9 01:49 tty.Bluetooth-Incoming-Port crw-rw-rw- 1 root wheel 18, 0 Aug 9 02:43 tty.SLAB_USBtoUART crw-rw-rw- 1 root wheel 18, 4 Aug 9 01:58 tty.usbserial-0001 I removed the device and confirmed the devices are not present. Here is the output of the scripts: <<< ALL FIRMWARE FILES LOCATED >>> <<< PROBING OSX DEVICES FOR O.MG-CABLE-PROGRAMMER >>> esptool.py v2.6 Serial port /dev/cu.SLAB_USBtoUART Connecting........_____....._____....._____....._____....._____....._____....._____ esptool.py v2.6 Serial port /dev/cu.usbserial-0001 <<< O.MG-CABLE-PROGRAMMER WAS NOT FOUND IN DEVICES, YOU MAY NEED TO INSTALL THE DRIVERS FOR CP210X USB BRIDGE >>> VISIT: [ https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers ] I did confirm that I have Python 3.8x installed, and updated it's pip: howard@imac /dev % python3 -m pip --version pip 20.2.1 from /Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/site-packages/pip (python 3.8) From what I can tell, it either can't find the device, or it is looking for the wrong one...help? Thanks in advance...looking forward to stumbling my way through a bunch of Hak5 tools over the next few days, so any pointers greatly appreciated! H