Search the Community
Showing results for tags 'connection sharing error'.
Found 1 result
Hello guys, First of all I want to say hi as I'm new to forum and WP. I also want to mention that I looked for the help in other topics but unfortunately was unable to overcome my issue. I have a problem with connection sharing (I have access to internet, however nano does not - impossible to load bulletins). I used the script and it worked the first time. After I left nano scanning for a few minutes the connection was gone. Client mode works fine. Using the script again did not help. Adding new default routes to Kali did not help. Factory rested did't as well. I don't know how to resolve this... My system info: Kali Rolling edition (not vm) nano: v 2.5.2 script: wp6.sh route on kali outputs: Destination Gateway Genmask Flags Metric Ref Use Iface default _gateway 0.0.0.0 UG 600 0 0 wlan0 10.0.0.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan0 172.16.42.0 0.0.0.0 255.255.255.0 U 100 . 0 0 wlan0 ip route: default via 10.0.0.1 dev wlan0 proto dhcp metric 600 10.0.0.0/24 dev wlan0 proto kernel scope link src 10.0.0.11 metric 600 172.16.42.0/24 dev eth1 proto kernel scope link src 172.16.42.109 metric 100 Wp6.sh configuration: Saved Settings: Share Internet connection from wlan0 to WiFi Pineapple at eth1 through default gateway 10.0.0.1 (nano is indeed on eth1) ifconfig on eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.42.109 netmask 255.255.255.0 broadcast 172.16.42.255 (...) also from management page: Networking tab > route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 172.16.42.42 0.0.0.0 UG 0 0 0 br-lan 172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan "upadte route" shows in grey: 172.16.42.42 Please help me deal with this... and sorry if something's stupid happening, I'm still a learner. let me know if more data is needed. Thanks!