Search the Community
Showing results for tags 'cannot access user interface'.
I had successfully managed to connect to my router via ethernet cable and access the portal. I could even download modules and see the bulletin, and clients could connect and browse the internet. Then I had to move my gear and set it back up. When I did so, I had to put my WiFi to share with the ethernet for the router as I did not need to share the connection anymore previously. Now with sharing on, I cannot connect via the IP. there is also no choice to join via management WPA2 as the router was reset, however the default open AP shows. The router successfully boots up every time it is unplugged. Blue and orange lights show with both occasionally flickering. Access via SSH is not possible as I cannot reach its option through the interface. The router is connected as followed: 1. An ethernet CAT5E cable - Laptop > Router. 2. USB 3.0 HUB is connected to the Laptop. 3. The Y end of the USB Y cable has both of its USB heads inserted into the USB 3.0 HUB connected to the laptop. 4. Micro USB end of the Y cable is connected to ETH1 micro USB port on the back of the Router. 5. The US wall plug is connected to the wall via extension lead and adapter for the UK. 6. The other end of the power cable is plugged into the back of the router and turned on. 7. All drivers on the laptop are up to date. All 4 antennae are connected.
I attempted a first boot setup today with no luck. When I try to connect 172.16.42.1:1471 through Firefox, I receive the message "Unable to Connect: Firefox can't establish a connection to the server at 172.16.42.1:1471." I cannot access the pineapple's user interface. Edit: I am attempting to connect to the pineapple solely through an ethernet connection. I am using a Macbook Pro Retina, OS 10.8.5 I insterted the MicroSD card supplied, powered on the pineapple (power cord), waited 6 minutes, and attempted to browse to http://172.16.42.1:1471. No luck. My Macbook ethernet settings: Configure IPv4: Manually IP Address: 172.16.42.42 Subnet Mask: 255.255.255.0 Router: (left blank) DNS Server: 18.104.22.168 Internet Connection Sharing: Off I can ping 172.16.42.1 with no packet loss. I am also able to ping 172.16.42.1 from a local Kali VM, but Iceweasel is similarly unable to access the user interface at 172.16.42.1:1471. If I browse to 172.16.42.1, I am able to see Index of /, with a message of: 1. ../ modified: Thu, 01 Jan 1970 00:00:29 GMT directory - 0.00 kbyte I tried the unbricking procedure here: https://wifipineapple.com/?flashing. I was able to set the DIP switches, set my Mac's static IP to 192.168.1.2, power up the pineapple and navigate to 192.168.1.1. I was able to upload the stager.bin file to the pineapple succesfully, reset the DIP switches, power down the pineapple, insert the MicroSD card, and power up the pineapple. After resetting my Mac's ethernet to 172.16.42.42 (etc), I am still unable to access the user interface for the pineapple. I would really appreciate any help anyone might be able to offer. I'm really stuck here. Again, thank you for any help or advice anyone can offer. Edit: nmap port scan from local Kali VM; root@kali:~# nmap -p 1-1500 172.16.42.1 Starting Nmap 6.25 ( http://nmap.org ) at 2014-01-18 12:15 CST Nmap scan report for 172.16.42.1 Host is up (0.00080s latency). Not shown: 1497 filtered ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 7.43 seconds So, I'm a bit confused here. If 1471 isn't open, how do I browse to it? What am I missing here?