Search the Community

I just recently received my Bash Bunny and was struggling to install the tools. I decided to mess around with the install.sh and ended up causing the Bash Bunny to become stuck. I removed the Bash Bunny and cannot get it to do anything now. When plugged in the green LED goes of for about 2 seconds then goes off... Nothing happens after that and changing the switch does nothing different. I have no clue on what I can do... thanks for any responses.

Hi, I bought the bashbunny when it just came out. Now when I try to use it, it won't start up at all. This is happening in arming mode as well as either switch. Physically, nothing appears to be wrong with the device, but plugging it into several computers, my phone and a wall adapter are all yielding the same results, nothing... does anyone have any ideas on this?

We have literally gone through every piece of information on this site and we are still unable to login to our pineapple after collecting data for 3 days. How can I exchange this defective pineapple for one that works. This was its first use!

Hi all. I just got my pineapple mark v from ebay. I did a reset(flashing) by following instructions on https://www.wifipineapple.com/?flashing Factory bin file was uploaded successfully. I Set all the DIP switches back to the default configuration up, up, up, up, up and rebooted the box(power down/Up) I can see that my pineapple is not coming up. Green Light is on but Blue light is constantly flashing "Booting up" After about 20 Sec all the light are ON,after a second all light are ON a part from Blue,after a second Amber Light is blinking ones,then Red Light goes Off... and then Blue one starts blinking again(while Greed is ON) Above is going in the LOOP. Please HELP

Hey Guys, i have using the Mark 5 a few month but a few weeks ago I took the wrong accu (both were black) and now if I put the power supply in it: Nothing, not a single light. So I know this isn't much information but I only want to ask if there's a tutorial to repair it. I can't send it back because i am in europe and the shipping costs are high. SO can anyone help me?

All, Got a MKV and had it running 1.0.4 - working fine for months, including most of today. Today after finishing some work on dnsspoof and /www/index.php, I turned her off and later back on. Now I get a solid green light, and a very faint red light and that's it. No ethernet link recognised so I don't have a workable LAN connection. Tried setting dips to U,D,D,U,U and U,U,U,U,D left to right per reflashing/recovery instructions to no avail. Tried multiple LAN cables, and both the USB and primary power supplies that came with the unit. There's definitely no LAN link. Any help appreciated! Thanks, _sw1tch_

I was going through the first steps of setting up my pineapple. After plugging in the power, about 30 seconds in the power cable fell out the wall.... Damn old outlets! I have followed the steps on unbricking the MKV but can not connect to it. I get a solid green, amber, blue, and a blinking red. The page just times out. I tried the resting using 10011 then setting it back to 11110 but still can not connect. Powering off and on between each dip change. Any help would be much appreciated!

After a few hours (I've not timed it, but about 20-24 hours) karma stops working. It stops beaconing it's pineapple SSID too untill I restart it entirely or restart wifi at least. I'll investigate more thoroughly when I have some more time.

The main problem is that the pineapple address won't load (172.16.42.1:1471) Pineapple Hardware Version: Mark IV Pineapple Software Version: I beleive 2.8.0 (I remember attempting to update) OS used to connect to the pineapple: Macintosh (MacBook Pro) and Linux (Kali Linux [ran through Virtual Box]) Network layout of how your setup is connected (including IP information): In Mac's network settings IP Address: 172.16.42.42 Subnet Mask: 255.255.255.0 Router: Nothing DNS Server: 8.8.8.8 Search Domains: Nothing All the tools/options that are running on the pineapple when the issue happened: It was the default, but if I did have anything it was either DNS Spoof or the Ping results from computer to pineapple: ping 172.16.42.1PING 172.16.42.1 (172.16.42.1): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 Request timeout for icmp_seq 4 Request timeout for icmp_seq 5 Request timeout for icmp_seq 6 Request timeout for icmp_seq 7 Request timeout for icmp_seq 8 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 Request timeout for icmp_seq 11 Request timeout for icmp_seq 12 Request timeout for icmp_seq 13 Request timeout for icmp_seq 14 Request timeout for icmp_seq 15 ^C --- 172.16.42.1 ping statistics --- 17 packets transmitted, 0 packets received, 100.0% packet loss Is the problem repeatable: No (it works for a while but not it does not) Steps taken which created the problem: Just changed network preferences and I always plug the power in then the ethernet (PoE) (if that matters) Error Messages: Just the ping (covered above) Log file information: Nothing Anything else that was attempted to 'fix' the problem: Well everytime I plug it in the only lights are the solid PWR light and the WPS light flashes, after like 30 seconds the WPS light goes solid and the WLAN light comes on P.S. Even when I have this problem the WiFi pineapple hotspot is viewable (pineapple ac:58)