Search the Community

On my usb port I'm using usb memory stick (http://forums.hak5.org/index.php?/topic/25882-how-to-enable-usb-mass-storage-with-swap-partition/'>made like this) I'm using usb memory for saving "infusions aka modules" Can I use this same usb memory stick for saving files in /<root>/? e.g.: http://hak5.org/hack/pineapple-phishing Begin by downloading and installing the following packages from downloads.openwrt.org: libopenssl_0.9.8i-3.2_mips.ipk, php4_4.4.7-1_mips.ipk, php4-cgi_4.4.7-1_mips.ipk and zlib_1.2.3-5_mips.ipk Copy the package files (*.ipk) to the WiFi Pineapple in /root/ using the scp command in Linux or an SCP utility in Windows like WinSCP or Plink. Only I don't have enough memory on ap121u to install all files, can I extend it with the same usb memory stick?

Hi I realy need your guys help! Having problem getting the Huawei E1550 working with the MarkIV 2.7. I get the following: 00:48:40 Pineapple daemon.info pppd[8469]: Exit. 00:48:39 Pineapple daemon.notice pppd[8469]: Connection terminated. 00:48:33 Pineapple daemon.warn pppd[8469]: IPCP: timeout sending Config-Requests 00:47:59 Pineapple local2.info chat[8473]: timeout set to 30 seconds 00:47:59 Pineapple local2.info chat[8473]: send (ATD*99***1#^M) 00:47:59 Pineapple local2.info chat[8473]: send ( ^M) 00:47:59 Pineapple local2.info chat[8473]: expect (OK) 00:47:59 Pineapple local2.info chat[8473]: expect (CONNECT) 00:47:59 Pineapple local2.info chat[8473]: ^M 00:47:59 Pineapple local2.info chat[8473]: ^M 00:47:59 Pineapple local2.info chat[8473]: OK 00:47:59 Pineapple local2.info chat[8473]: CONNECT 00:47:59 Pineapple local2.info chat[8473]: ATD*99***1#^M^M 00:47:59 Pineapple local2.info chat[8473]: AT+CGDCONT=1,"IP","internet"^M^M 00:47:59 Pineapple local2.info chat[8473]: -- got it 00:47:59 Pineapple local2.info chat[8473]: -- got it 00:47:59 Pineapple daemon.notice pppd[8469]: Connect: 3g-wan2 <--> /dev/ttyUSB0 00:47:59 Pineapple daemon.info pppd[8469]: Using interface 3g-wan2 00:47:59 Pineapple daemon.info pppd[8469]: Serial connection established. 00:47:58 Pineapple local2.info chat[8473]: timeout set to 10 seconds 00:47:58 Pineapple local2.info chat[8473]: send (ATE1^M) 00:47:58 Pineapple local2.info chat[8473]: send (AT+CGDCONT=1,"IP","internet"^M) 00:47:58 Pineapple local2.info chat[8473]: send (AT&F^M) 00:47:58 Pineapple local2.info chat[8473]: report (CONNECT) 00:47:58 Pineapple local2.info chat[8473]: expect (OK) 00:47:58 Pineapple local2.info chat[8473]: expect (OK) 00:47:58 Pineapple local2.info chat[8473]: abort on (NO CARRIER) 00:47:58 Pineapple local2.info chat[8473]: abort on (ERROR) 00:47:58 Pineapple local2.info chat[8473]: abort on (BUSY) 00:47:58 Pineapple local2.info chat[8473]: ^M 00:47:58 Pineapple local2.info chat[8473]: OK 00:47:58 Pineapple local2.info chat[8473]: OK 00:47:58 Pineapple local2.info chat[8473]: ATE1^M^M 00:47:58 Pineapple local2.info chat[8473]: AT&F^M^M 00:47:58 Pineapple local2.info chat[8473]: -- got it 00:47:58 Pineapple local2.info chat[8473]: -- got it 00:47:57 Pineapple daemon.notice pppd[8469]: pppd 2.4.5 started by root, uid 0 00:47:57 Pineapple daemon.info dnsmasq[1087]: using nameserver 8.8.8.8#53 00:47:57 Pineapple daemon.info dnsmasq[1087]: using local addresses only for domain lan 00:47:57 Pineapple daemon.info dnsmasq[1087]: reading /tmp/resolv.conf.auto 00:47:54 Pineapple daemon.notice pppd[8419]: Modem hangup 00:47:54 Pineapple daemon.notice netifd: Interface 'wan2' is now down 00:47:54 Pineapple daemon.info pppd[8419]: Exit. 00:47:53 Pineapple daemon.notice pppd[8419]: Connection terminated. My configuration are as: *12d1:1001*) echo "Huawei E1550 detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=apn uci set network.wan2.username=tmn uci set network.wan2.password=tmn uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 12d1 -p 1001 -M 55534243123456780000000000000011060000000000000000000000000000 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x12d1 product=0x1001 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; I have tried changin the password= and username= to blank also changing apn to internet. Realy appriciate any help i can get. Thanks!

Hi guys, I recently provided a post about a CGI error that I was receiving but I think I discovered the cause. Unfortunately, it leads me to a much larger error. My MarkIV pineapple cannot connect to the internet despite the setup up being just like the one described in the Windows OS tethering wiki. The victims computer cannot connect to the internet either. They cannot ping the wifi pineapple despite being connected to the wireless network "Pineapple0e:93" and they cannot ping out to the internet. I'm stumped as to what the cause is. I think it is a networking issue but I don't know where to begin. What is the cause to the disconnection and how can I fix it? I apologize if this is a really newbie question but if you could help me out it would be fantastic. :) The info is a follows: Pineapple Hardware Version (ex: Mark III, Mark IV, etc.): MarkIV Pineapple Software Version (ex: 2.5.0, 2.6.4): 2.7.0 OS used to connect to the pineapple: Windows 7 Network layout of how your setup is connected (including IP information): 172.16.42.1/42 like Wiki All the tools/options that are running on the pineapple when the issue happened: N/A (Default settings) Ping results from computer to pineapple: Successful (on both Victim and Host comps) Is the problem repeatable (Yes/No): Yes Steps taken which created the problem: Connected Pineapple, accessed web GUI Error Messages: Error connecting. Please make sure you have a working connection! <---From Pineapple Error 105(net:ERR_NAME_NOTRESOLVED): Unable to resolve the server's DNS address <---From Victim's Chrome Log file information: 00:01:11 Pineapple kern.err kernel: [ 71.280000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up 00:01:11 Pineapple kern.err kernel: [ 71.270000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 00:01:13 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/mode: nonexistent directory 00:01:13 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:wan/device_name: nonexistent directory 00:01:13 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/mode: nonexistent directory 00:01:13 Pineapple user.info sysinit: /etc/rc.common: eval: line 1: can't create /sys/class/leds/alfa:blue:lan/device_name: nonexistent directory 00:01:13 Pineapple user.info sysinit: sh: write error: Invalid argument 00:01:13 Pineapple user.info sysinit: sh: write error: Invalid argument Anything else that was attempted to 'fix' the problem: Restore to Factory Settings, reinstall firmware version, Cleared Cches, Restarted Connections, reboot, restart computer. Routing Table: Destination Gateway Genmask Flags Metric Ref Use Ifacedefault 172.16.42.42 0.0.0.0 UG 0 0 0 br-lan172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan Host Ethernet Settings (Thus Wifi Pineapple Settings): Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E8-03-9A-BC-2F-D6 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d08f:2514:35d5:94a5%17(Preferred) IPv4 Address. . . . . . . . . . . : 172.16.42.42(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 535298970 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-A3-F0-CC-C4-85-08-32-F2-A8 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled Host WIFI settings that is shared: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : *****.edu Description . . . . . . . . . . . : Intel® Centrino® Advanced-N 6235 Physical Address. . . . . . . . . : C4-85-08-32-F2-A8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f540:6cad:ca57:5cd0%13(Preferred) IPv4 Address. . . . . . . . . . . : 134.71.203.31(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Thursday, February 07, 2013 3:54:37 PM Lease Expires . . . . . . . . . . : Thursday, February 07, 2013 4:39:37 PM Default Gateway . . . . . . . . . : 134.71.203.1 DHCP Server . . . . . . . . . . . : 134.71.247.100 DHCPv6 IAID . . . . . . . . . . . : 298091784 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-A3-F0-CC-C4-85-08-32-F2-A8 DNS Servers . . . . . . . . . . . : 134.71.247.100 134.71.247.190 134.71.247.170 NetBIOS over Tcpip. . . . . . . . : Enabled Much Thanks!

Hi Ya'll,So I tried to get some new modules onto my new USB drive. However, when I clicked the "List available Infusions (aka modules)" link, it took a long timethen I saw "The CGI process did not produce any response". I went into my MarkIV module.php page and saw this code: $remoteModules = getRemoteList(); if(trim($remoteModules[0]) == "") echo "<center><font color=red>".$strings["modules-available-error"]."</font></center>"; else drawRemoteModules($remoteModules); With the getRemoteList() being: function getRemoteList(){ $remoteFile = trim(@file_get_contents("http://cloud.wifipineapple.com/index.php?downloads&moduleList")); $modules = explode("\n", $remoteFile); return $modules; } and drawRemoteModules() being: function drawRemoteModules($modules){ global $strings; echo "<table>"; echo "<tr><th>".$strings["modules-table-name"]."</th><span></span><th>".$strings["modules-table-version"]."</th><th>".$strings["modules-table-author"]."</th><th>".$strings["modules-table-description"]."</th><th>".$strings["modules-table-size"]."</th><th>".$strings["modules-table-action"]."</th></tr>"; foreach($modules as $module){ if($module != ""){ $module = explode("|", $module); echo "<tr><td>$module[0]</td><td>$module[1]</td><td>$module[2]</td><td>$module[3]</td><td>$module[4]K</td><td align=right>".downloadLink($module)."</td></tr>\n"; } } echo "</table>"; } I know that CGI error may come from a timeout or a no ouput returned from the script, but looking at the code I don't see anything that would cause any of those conditions. I'm stumped here, do you guys/gals have any ideas? Is anyone else receiving this error?