Search the Community
Showing results for tags '3g network configuration'.
On the older Tetra i could use my Sierra Aircard modem out of the box. When I made a SSH connection to the Pineapple Tetra and ran ifconfig -a then i could see it as wwan0 I only had to vi /etc/config/network option ifname 'wwan0' # add this line under wwan and vi /etc/config/dhcp option ignore 0 # set this under under wan Then it worked. But here on the Pineapple VII i cant see the card What opkg update && opkg install xxx do i need ? I cant find kmod-usb-net-sierrawireless kmod-usb-serial-wwan kmod-usb-serial-sierrawireless kmod-usb-serial-qualcomm or anything that would make the card work ( like opkg list|grep -i sierra ) Any hints ?
Greetings; I have an issue with the LT. i have the settings set as per the tutorial from Darren. I connect well to the LT 3g on my remote network via 3g but i cannot access any computer on the local network,, vould anyone who has had a similar issue share his/her solution. I have had several communications with Darren who hasn't been so helpful. Attached are the settings of my LT and local network. Kind regards Greetings Darren; I have setup the LT to access the remote LAN through Autossh, Php meterpreter and openvpn which are all working. And am accessing while connected over 3g. Attached pleased find the settings as you asked and my remote network ipconfig. Kind regards. Sent: Tuesday, March 12, 2019 at 8:32 AM From: "Darren (Hak5)" <firstname.lastname@example.org> To: Mikogo <email@example.com> Subject: [Hak5] Re: Lan turtle 3g settings ##- Please type your reply above this line -## Your request (63755) has been updated. To add additional comments, reply to this email. Darren (Hak5) Mar 11, 22:32 PDT I'd be happy to help but I need a little more information on what's going on here. Can you please detail your network environment, how you have the LAN Turtle setup and how you're accessing its shell. Are you accessing it from SSH while directly connected over USB, over 3G, over the LAN? Can you also please provide the output of the commands you are attempting to run, as well as the output of the "route" command and "cat /etc/config/firewall" and "cat /etc/config/network" Best regards, Darren config_firewall.txt config_network.txt ipconfig _all.txt route.txt