Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by Omar01

  1. I bought them cheaper but from amazon you can buy them for 20 dll https://www.amazon.com/Argon-Forty-Raspberry-Barebones-Audio-Video/dp/B075FRRVLR/ https://www.adafruit.com/product/3400 or you can also do the complete system as shown here: https://www.tomshardware.com/uk/how-to/kvm-over-ip-raspberry-pi The bad part of this is that you have to do everything by hand and give support, but in my experience of 1 week trying to get this going is that there is more support and documentation if you go for the cheap option In rpizeroW I have it working with kernel 4.14.180-178, what I don't like is trying to update to have everything safely and having to fix what breaks, but the keycroc has kernel 3.4.39 like this that I do not win much :S
  2. I am in a remote area, I cannot trust the internet, the cell phone does not work many times. I have a way to do it with an RPI but I didn't want to dedicate myself to maintaining the operating system. But I am seeing that this system does not have good maintenance or updates so .. I think that the option of 20 dll is much better sadly
  3. Thanks, I'll try today. If it doesn't work tomorrow you can look for a keycroc in craigslist and I'll continue working with the rpi 😞
  4. I have many computers with linux, I want to mount a memory in the keycroc to have more than 2gb of loot, since that is very little for these times. I have the need to backup several GB and transfer it slowly via the internet. but i need to copy it to disk first
  5. Do you think any of these modules are necessary? root@usbbackupmachine1:~# cat /etc/modprobe.d/fbdev-blacklist.conf # This file blacklists most old-style PCI framebuffer drivers. blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist vt8623fb
  6. I think it's worth checking that you have the latest version of the software, I just installed the latest version last week. I'm looking in rpi forums if I find the solution to this problem, I can't find much information on the internet regarding keycroc these are the versions that I have installed: root@usbbackupmachine1:~# cat /etc/debian_version 8.11 root@usbbackupmachine1:~# cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" VERSION_ID="8" VERSION="8 (jessie)" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" root@usbbackupmachine1:~#
  7. I am testing with different memory models and manufacturers, at the moment they all detect them but none show them in "fdisk -l" # lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0bda:f179 Realtek Semiconductor Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 0951:1666 Kingston Technology Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@usbbackupmachine1:~# modprobe usb-storage root@usbbackupmachine1:~# mkdir /mnt/USB2 root@usbbackupmachine1:~# mount /dev/usbdev2.3 /mnt/USB2 mount: /dev/usbdev2.3 is not a block device root@usbbackupmachine1:~#
  8. do you have the latest system update? I have the following: # uname -a Linux usbbackupmachine1.xxx.com 3.4.39 # 213 SMP PREEMPT Fri Jun 26 04:28:14 UTC 2020 armv7l GNU / Linux I don't get any error doing "modprobe usb-storage" root @ usbbackupmachine1: ~ # modprobe usb-storage root @ usbbackupmachine1: ~ # but even so "fdisk -l" does not show the partitions
  9. from what you can see it shows me in /dev/usbdev2.2 I have nothing in / dev / sdX # ls / dev / sd * ls: cannot access / dev / sd *: No such file or directory I think it is the speed of the usb currently it detects it with sunxi-ehci [250.160220] usb 2-1: new high-speed USB device number 2 using sunxi-ehci Usually dmesg shows something like this on other devices that I have: [81477.804504] usb-storage 2-2: 1.0: USB Mass Storage device detected [81477.804666] usb-storage 2-2: 1.0: Quirks match for vid 090c pid 1000: 400 [81477.804703] scsi host3: usb-storage 2-2: 1.0 [81543.084379] usb 2-2: USB disconnect, device number 7 [82632.707102] usb 2-2: new high-speed USB device number 8 using xhci_hcd [82632.858909] usb 2-2: New USB device found, idVendor = 090c, idProduct = 1000, bcdDevice = 11.00 [82632.858915] usb 2-2: New USB device strings: Mfr = 1, Product = 2, SerialNumber = 3 [82632.858917] usb 2-2: Product: Flash Disk [82632.858919] usb 2-2: Manufacturer: USB [82632.858921] usb 2-2: SerialNumber: FBH1108231403010 [82632.860136] usb-storage 2-2: 1.0: USB Mass Storage device detected [82632.860219] usb-storage 2-2: 1.0: Quirks match for vid 090c pid 1000: 400 [82632.860250] scsi host3: usb-storage 2-2: 1.0 I think I have to change from sunxi-ehci to xhci_hcd, but doing this maybe it will break the compatibility with current modules :S
  10. I also had thought that it would be a little easier to mount a USB, today I will try more to try to mount it, I am not sure why the limitation of the USB port is to save disk or because the processor cannot handle the speed of transfer
  11. Thank you very much for answering, try to mount it from ssh as follows: mkdir -p /mnt/USB1 modprobe usb-storage mount /dev/usbdev2.7 /mnt/USB1 but it won't let me do it, try to indicate the type of filesystem and neither I think it is necessary to change something in the operating system to allow mounting external disks, I am not sure because there is nothing in the documentation that indicates details about it. I guess you need to add a module to add compatibility
  12. I have the need to save more than 2gb of client data, I am trying to mount a usbSticks I suppose it is only necessary to find the required .ko module to be able to mount the device locally. If anyone knows how to do it I would appreciate your help
  13. >First step is to stop the above script echo 0 > /sys/bus/platform/devices/sunxi_usb_udc/otg_role sleep 1 rmmod usbhid -f rmmod g_ether -f >In the second step we create the image and mount the client as usb mkdir -p /mnt/USBFake/ dd if=/dev/zero of=/mnt/fakeUSB bs=1M count=200 mkfs.vfat /mnt/fakeUSB fatlabel /mnt/fakeUSB KeyBackup insmod /usr/local/croc/lib/croc_gadget.ko is_storage=1 file=/mnt/fakeUSB stall=0 removable=1 nofua=0 idVendor=0xF000 idProduct=0xFF10 iSerialNumber=ch000001 echo 2 > /sys/bus/platform/devices/sunxi_usb_udc/otg_role mount /mnt/fakeUSB /mnt/USBFake/ Its ready!
  14. I want to use the input USB port to mount it on linux and then share the contents of the usb via the internet, so that I can see the contents of the usb remotely but the operating system can see it transparently I'm trying to get it to work for the moment as a memory in a demo /mnt/USB folder any ideas? at the moment I am testing with trial and error script ATTACKMODE SERIAL STORAGE LOOTDIR=/mnt/USB LED ATTACK STAGE1
  15. you can use rsync its faster rsync -avz -e ssh /home/user/funStff/ 192.168.X.X:/mnt/funStuff/
  16. Al parecer aqui hablan ingles, yo no tengo el screen crab pero estaba pensando comprarlo, que tal te funciona ya solucionaste tu problema ?
  • Create New...