Jump to content


Active Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by chrizree

  1. I guess you got the answers to your questions on Discord
  2. OK, so based on those screenshots you don't have any problems getting decent speeds from your PC to your Pineapple, in other words... the open AP isn't really slow (as I assume that's how you were connected to the Pineapple when taking those screenshots). If you want to use iperf3 you need to start it as you specified on the Pineapple, but you have to run the client from another device (PC) that is connected to the Pineapple's open AP and use: iperf3 -c What speeds does iwconfig show for wlan2 when you run iwconfig on the Pineapple itself? And, don't run the Pineapple (or
  3. I assume they are configured with two different MAC addresses. Is the device.config file downloaded for each of the Turtles (just to make sure they don't use the same file that might confuse C2)?
  4. I can't reproduce such low speeds on my Mk7, I get at least 50 Mbps when connected to the open network of the Pineapple. Try using iperf3 to measure the local connection only.
  5. You have to describe your setup and environment more in detail to be able to help. In what way do you get those speed values? How do you measure? What client OS are you using when measuring the speed? Have you tried different clients or just the one that gives you slow speeds? Any conflicting wireless networks nearby on the same (or adjacent) channels? What client equipment do you use in hardware terms when it comes to WiFi NICs? Chipset? Manufacturer?
  6. I haven't started playing with developing modules of my own yet, but... I think you should develop on some other device than the Pineapple itself.
  7. And I'm not that sure the hostname will work out that very well as it's specified above, listenip shouldn't really be needed in a "standard" setup, now it just makes a mess of the actual hostname as it is in the string above as the actual parameter will be a part of the hostname/IP
  8. Don't you get the bash error when running that string? It should be pretty obvious. The command line is not correct, get rid of all the backslashes, they are not needed when running it as a single line wget https://c2.hak5.org/download/community -O c2.zip && unzip c2.zip && IP=$(curl -s https://checkip.amazonaws.com) && echo "Copy the below setup token to browser http://$IP:8080" && ./c2-*_amd64_linux -hostname $IP-listenip $IP
  9. You will get it when you successfully run the binary Not ./c2_community-linux-64 but ./c2-*_amd64_linux (or to be more specific c2-3.1.1_amd64_linux but using the asterisk variant makes it more "transparent" to new releases)
  10. You are probably also using the wrong name for the binary
  11. The zip file is missing in that string when issuing the unzip command
  12. For some reason wget https://c2.hak5.org/dl -O c2.zip doesn't seem to work anymore. If you cat the downloaded file it will most likely be a html file, hence unzip complaining about the fact that it is not recognized as a zip file. Try wget https://c2.hak5.org/download/community -O c2.zip instead. The file should be about 47.5 MB when downloaded.
  13. Not sure if I follow you in your description of the problems you face, first you say that when I click on "Add devices" nothing comes up then you say If I want to add a device it works. What Ubuntu variant are you using; Server or Desktop? Are you accessing C2 from the same machine or some other PC? What browser(s) are you using? Do you have any addons/extentions/plugins active in your browser(s)? Have you been using/running C2 before 3.1.1 or is that the first version of C2 that you use?
  14. You should change the text you cut from my post in the 3.1.1 release thread to not confuse those following this, the numbering 5) and 6) can be removed as well as the comment I put about "use port 8080" since you in your instruction has already mentioned that the setup is for port 80 ("in intrest of newbie users where going to be using port 80 instead")
  15. Not sure where you got the command string containing "https://c2.hak5.org/com-cd", it won't download the C2 zip file needed to get the executable binary. It seems as if you are doing a local installation of C2 on some of your own devices since an IP from the private non routable address ranges appear in your output. In that case you can't use the command string provided from Hak5 without modifying it first. You can't include "IP=$(curl -s https://checkip.amazonaws.com)" since it will return your publicly facing IP address, and if that IP address doesn't have some kind of port forwarding (
  16. Is the C2 binary actually located in the path specified? Executable (it should be when unpacked if downloading the zip)?
  17. That payload works, except that you need to add STRING before Test if you expect the string to appear in Notepad. Try to re-format the SD card or try another one. What encoder are you using to create the inject.bin?
  18. I often use the Raspberry Pi for such scenarios, it's easy to set up using hostapd and dnsmasq
  19. With Bing, I guess you mean Edge, or?! It's for sure a Firefox thing if it works in other browsers. You could try to "force" refresh (bypass cache) of the page loading or clear cache and such. - Hold down the Shift key and left-click the Reload button - Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux) - Press "Command + Shift + R" (Mac) Could also be some addon/plugin that you might have active/installed. Difficult to say without having the "whole picture painted of the landscape".
  20. Follow the documentation and try one of the executables in the downloaded C2 zip file
  21. This is at least the most recent info that is available on the Kismet web site, I guess you have already tried that though, but it must be the latest "variant" of the way to do it since it's published there (and also updated on the 4th of Feb 2021, that is "recent" in my book) https://www.kismetwireless.net/docs/readme/kml/
  • Create New...